流浪汉启动超时设置

Question

我正在将其作为Ambari设置的一部分。 按照步骤快速开始使用Ambari和Vagrant。

我正在使用此CentOS 6.4映像：
https://github.com/u39kun/ambari-vagrant/blob/master/centos6.4/Vagrantfile

我是通过RHEL 7.2主机和VirtualBox 5在Google Cloud上执行此操作的，但是按照建议的方式去安装CentOS 6.4 guest虚拟机。

我已成功安装并配置了先决条件（需要进行调整才能使vbox 5在RHEL 7.2上运行）。

当我尝试启动6台主机时，我看到机器无法启动的超时。

我正在运行的主机速度很快-32核，64 GB RAM，500 GB SSD ...

有谁知道可能是什么问题？ 是否有需要关闭的防火墙等？

[<myuser>@ambari-host-rhel7 centos6.4]$ ./up.sh 6
Bringing machine 'c6401' up with 'virtualbox' provider...
==> c6401: Box 'centos6.4' could not be found. Attempting to find and install... c6401: Box Provider: virtualbox c6401: Box Version: >= 0
==> c6401: Box file was not detected as metadata. Adding it directly...
==> c6401: Adding box 'centos6.4' (v0) for provider: virtualbox c6401: Downloading: http://developer.nrel.gov/downloads/vagrant-boxes/CentOS-6.4-x86_64-v20130427.box
==> c6401: Box download is resuming from prior download progress
==> c6401: Successfully added box 'centos6.4' (v0) for 'virtualbox'!
==> c6401: Importing base box 'centos6.4'...
==> c6401: Matching MAC address for NAT networking...
==> c6401: Setting the name of the VM: centos64_c6401_1456171923223_2329
==> c6401: Clearing any previously set network interfaces...
==> c6401: Preparing network interfaces based on configuration... c6401: Adapter 1: nat c6401: Adapter 2: hostonly
==> c6401: Forwarding ports... c6401: 22 (guest) => 2222 (host) (adapter 1)
==> c6401: Running 'pre-boot' VM customizations...
==> c6401: Booting VM...
==> c6401: Waiting for machine to boot. This may take a few minutes... c6401: SSH address: 127.0.0.1:2222 c6401: SSH username: vagrant c6401: SSH auth method: private key


Timed out while waiting for the machine to boot. This means thatVagrant was unable to communicate with the guest machine withinthe configured ("config.vm.boot_timeout" value) time period.If you look above, you should be able to see the error(s) thatVagrant had when attempting to connect to the machine. These errorsare usually good hints as to what may be wrong.If you're using a custom box, make sure that networking is properlyworking and you're able to connect to the machine. It is a commonproblem that networking isn't setup properly in these boxes.Verify that authentication configurations are also setup properly,as well.If the box appears to be booting properly, you may want to increasethe timeout ("config.vm.boot_timeout") value.

最后一步，我得到了这个摘要错误：

There was an error while executing `VBoxManage`, a CLI used by Vagrantfor controlling VirtualBox. 
The command and stderr is shown below.

Command: ["import", "/home/<me>/.vagrant.d/boxes/centos6.4/0/virtualbox/box.ovf", "--vsys", "0", "--vmname", "CentOS-6.4-x86_64_1456173504674_45962", "--vsys", "0", "--unit", "9", "--disk", "/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk"]
Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%

Interpreting /home/<me>/.vagrant.d/boxes/centos6.4/0/virtualbox/box.ovf...OK.0%...
Progress state: VBOX_E_FILE_ERRORVBoxManage: error: Appliance import failedVBoxManage: error: Could not create the imported medium '/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk'.
VBoxManage: error: VMDK: cannot write allocated data block in '/home/<me>/VirtualBox VMs/CentOS-6.4-x86_64_1456173504674_45962/box-disk1.vmdk' (VERR_DISK_FULL)
VBoxManage: error: Details: code VBOX_E_FILE_ERROR (0x80bb0004), component ApplianceWrap, interface IAppliance
VBoxManage: error: Context: "RTEXITCODE handleImportAppliance(HandlerArg*)" at line 877 of file VBoxManageAppliance.cpp

任何想法可能会发生什么？

Answer 1

您的驱动器上还有可用空间吗？

通常， VERR_DISK_FULL表示硬盘驱动器已满，无法为vdi文件配置足够的空间。