堆栈内存溢出
  繁体   English   中英

什么都不会从处理发送到Arduino

[英]Nothing gets sent to Arduino from Processing

 原文  2019-08-27 17:40:16  0   3    string/ performance/ arduino/ hex/ processing

问题描述

我有一个问题，我知道我的蓝牙模块（HC-05）已连接到处理草图，但是从处理草图中什么也没收到，为什么？

没有错误消息，但是信息永远不会发送出去，因为我在Arduino上从未见过，它将被打印到串行监视器。

完整的处理代码： 

import processing.serial.*;
import controlP5.*;

Serial myPort;
ControlP5 cp5;

int slider1 = 0;
int slider2 = 0;
int slider3 = 0;

void setup() {


  size(800, 800);
  cp5 = new ControlP5(this);
  PFont roboto = createFont("Roboto-Bold.ttf", 1, true);
  ControlFont font = new ControlFont(roboto, 28);
  Controller Aslider1 = cp5.addSlider("slider1")
    .setPosition(85, 100)
    .setCaptionLabel("Red")
    .setRange(0, 255)
    .setWidth(191)
    .setHeight(50);
  cp5.getController("slider1").getValueLabel().setFont(font).align(ControlP5.LEFT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);
  cp5.getController("slider1").getCaptionLabel().setFont(font).align(ControlP5.RIGHT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);

  Controller Aslider2 = cp5.addSlider("slider2")
    .setPosition(301, 100)
    .setCaptionLabel("Green")
    .setRange(0, 255)
    .setWidth(191)
    .setHeight(50);
  cp5.getController("slider2").getValueLabel().setFont(font).align(ControlP5.LEFT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);
  cp5.getController("slider2").getCaptionLabel().setFont(font).align(ControlP5.RIGHT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);

  Controller Aslider3 = cp5.addSlider("slider3")
    .setPosition(517, 100)
    .setCaptionLabel("Blue")
    .setRange(0, 255)
    .setWidth(191)
    .setHeight(50);
  cp5.getController("slider3").getValueLabel().setFont(font).align(ControlP5.LEFT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);
  cp5.getController("slider3").getCaptionLabel().setFont(font).align(ControlP5.RIGHT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);


  myPort = new Serial(this, "COM5", 9600);
}


void draw() {
  background(255, 100, 100);

  fill(255);
  stroke(1);
  rectMode(CENTER);
  rect(width/2, 350, 200, 75);

  fill(0);
  textSize(32);
  text("Send", width/2 - textWidth("Send") / 2, 350 + 10);

  if (mouseX > width/2 - 100 && mouseX < width/2 + 100 && mouseY > 350 - 75/2 && mouseY < 350 + 75/2) {
    if (mousePressed) {
      fill(100);
      stroke(1);
      rectMode(CENTER);
      rect(width/2, 350, 200, 75);

      fill(0);
      textSize(32);
      text("Send", width/2 - textWidth("Send") / 2, 350 + 10);
    } else {
      fill(170);
      stroke(1);
      rectMode(CENTER);
      rect(width/2, 350, 200, 75);

      fill(0);
      textSize(32);
      text("Send", width/2 - textWidth("Send") / 2, 350 + 10);
    }
  }
}

void mouseReleased() {
  if (mouseX > width/2 - 100 && mouseX < width/2 + 100 && mouseY > 350 - 75/2 && mouseY < 350 + 75/2) {
    fill(100);
    stroke(1);
    rectMode(CENTER);
    rect(width/2, 350, 200, 75);

    fill(0);
    textSize(32);
    text("Send", width/2 - textWidth("Send") / 2, 350 + 10);

    println(hex(color(int(slider1), int(slider2), int(slider3))).toString().substring(2));
    myPort.write(hex(color(int(slider1), int(slider2), int(slider3))).toString().substring(2));
    myPort.clear();
  }
}

完整的Arduino代码： 

#include <SoftwareSerial.h>
#include <Adafruit_NeoPixel.h>

const int PIN = 6;
const int NUMPIXELS = 30;

const byte rxPin = 2;
const byte txPin = 3;
SoftwareSerial mySerial (rxPin, txPin);

Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);

unsigned long currentMillis;
unsigned long loopMillis;
unsigned long waitMillis;
int interval = 100;
int waitInterval = 0;
int redBrightness = 0;
int greenBrightness = 0;
int blueBrightness = 0;
bool wait = false;
bool goToRed = true;
bool goToOrange = false;
bool goToYellow = false;
bool goToGreen = false;
bool goToAqua = false;
bool goToPurple = false;

String hexValue;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  mySerial.begin(9600);
  pixels.begin();
  pixels.show();
}

void loop() {

  if (mySerial.available() > 0) {
    hexValue = mySerial.read();
    Serial.println(hexValue);
    if (hexValue != "shiftN" || hexValue != "shiftY") {
      shiftMode = false;
      // value is a hex
      redBrightness = hexValue.substring(0, 2).toInt();
      greenBrightness = hexValue.substring(2, 4).toInt();
      greenBrightness = hexValue.substring(4, 6).toInt();
    } else {
      if (hexValue = "shiftY") {
        shiftMode = true;
      } else {
        shiftMode = false;
      }
    }
  }

  pixels.show();

  setColor(redBrightness, greenBrightness, blueBrightness);

}

void setColor(int red, int green, int blue) {
  for (int i = 0; i < NUMPIXELS; i++) {
    pixels.setPixelColor(i, red, green, blue);
  }
}

感谢您的帮助，干杯！

其他连结：

https://discourse.processing.org/t/nothing-gets-sent-to-arduino-from-processing/13654

https://arduino.stackexchange.com/questions/68233/nothing-gets-sent-to-arduino-from-processing

https://forum.arduino.cc/index.php?board=11.0

3 个解决方案

解决方案1
 2  2019-08-27 17:52:52

假设myPort是输出流，则可以对其进行缓冲。 如果是这样，请尝试在写入后刷新它： 

myPort.flush();

解决方案2
 0  2019-08-29 18:31:55

检查hc-05 9600波特或38400波特

解决方案3
 0  2019-08-31 11:53:35

每个人都想知道，这里是更新的代码：

Arduino的： 

#include <SoftwareSerial.h>
#include <Adafruit_NeoPixel.h>

const int pin = 6;
const int numOfPixels = 30;

int r = 0;
int g = 0;
int b = 0;

Adafruit_NeoPixel pixels(numOfPixels, pin, NEO_GRB + NEO_KHZ800);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  pixels.begin();
  pixels.show();

  pinMode(11, OUTPUT);

}

void loop() {

  pixels.show();

  // put your main code here, to run repeatedly:
  if (Serial.available() > 0) {

    Serial.println(String(Serial.read()));

    r = Serial.parseInt();
    g = Serial.parseInt();
    b = Serial.parseInt();


    setColor(r, g, b);
  }


    serialFlush();

}

void setColor(int red, int green, int blue) {
  pixels.fill(pixels.Color(red, green, blue), 0, numOfPixels);
  Serial.println("Red");
  Serial.println(red);
  Serial.println("Green");
  Serial.println(green);
  Serial.println("Blue");
  Serial.println(blue);
}

void serialFlush() {
  while (Serial.available() > 0) {
    char t = Serial.read();
  }
}

处理： 

import processing.serial.*;
import controlP5.*;

Serial myPort;
ControlP5 cp5;

int slider1 = 0;
int slider2 = 0;
int slider3 = 0;

void setup() {


  size(800, 800);
  cp5 = new ControlP5(this);
  PFont roboto = createFont("Roboto-Bold.ttf", 1, true);
  ControlFont font = new ControlFont(roboto, 28);
  Controller Aslider1 = cp5.addSlider("slider1")
    .setPosition(85, 100)
    .setCaptionLabel("Red")
    .setRange(0, 255)
    .setWidth(191)
    .setHeight(50);
  cp5.getController("slider1").getValueLabel().setFont(font).align(ControlP5.LEFT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);
  cp5.getController("slider1").getCaptionLabel().setFont(font).align(ControlP5.RIGHT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);

  Controller Aslider2 = cp5.addSlider("slider2")
    .setPosition(301, 100)
    .setCaptionLabel("Green")
    .setRange(0, 255)
    .setWidth(191)
    .setHeight(50);
  cp5.getController("slider2").getValueLabel().setFont(font).align(ControlP5.LEFT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);
  cp5.getController("slider2").getCaptionLabel().setFont(font).align(ControlP5.RIGHT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);

  Controller Aslider3 = cp5.addSlider("slider3")
    .setPosition(517, 100)
    .setCaptionLabel("Blue")
    .setRange(0, 255)
    .setWidth(191)
    .setHeight(50);
  cp5.getController("slider3").getValueLabel().setFont(font).align(ControlP5.LEFT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);
  cp5.getController("slider3").getCaptionLabel().setFont(font).align(ControlP5.RIGHT, ControlP5.BOTTOM_OUTSIDE).setPaddingX(0);


  myPort = new Serial(this, "COM4", 9600);
}


void draw() {
  background(slider1, slider2, slider3);

  fill(255);
  stroke(1);
  rectMode(CENTER);
  rect(width/2, 350, 200, 75);

  fill(0);
  textSize(32);
  text("Send", width/2 - textWidth("Send") / 2, 350 + 10);

  if (mouseX > width/2 - 100 && mouseX < width/2 + 100 && mouseY > 350 - 75/2 && mouseY < 350 + 75/2) {
    if (mousePressed) {
      fill(100);
      stroke(1);
      rectMode(CENTER);
      rect(width/2, 350, 200, 75);

      fill(0);
      textSize(32);
      text("Send", width/2 - textWidth("Send") / 2, 350 + 10);
    } else {
      fill(170);
      stroke(1);
      rectMode(CENTER);
      rect(width/2, 350, 200, 75);

      fill(0);
      textSize(32);
      text("Send", width/2 - textWidth("Send") / 2, 350 + 10);
    }
  }
}

void mouseReleased() {
  if (mouseX > width/2 - 100 && mouseX < width/2 + 100 && mouseY > 350 - 75/2 && mouseY < 350 + 75/2) {
    fill(100);
    stroke(1);
    rectMode(CENTER);
    rect(width/2, 350, 200, 75);

    fill(0);
    textSize(32);
    text("Send", width/2 - textWidth("Send") / 2, 350 + 10);

    myPort.write(str(slider1) + " " + str(slider2) + " " + str(slider3));
    println(str(slider1) + " " + str(slider2) + " " + str(slider3));
  }
}

然后查看此链接： https : //forum.arduino.cc/index.php?topic=634061.0

暂无
暂无

声明:本站的技术帖子网页，遵循CC BY-SA 4.0协议，如果您需要转载，请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.

相关问题 将字符串从 arduino 发送到处理 从处理发送字符串到Arduino无法正常工作 Arduino处理，字符串ArrayIndexOutOfBoundsException：18 Arduino：String to int得到奇怪的值 如何将处理中生成的字符串数组打印到Arduino Arduino +“ if”语句中的处理和字符串信息 以byte []发送的字符串内容以查询字符串的形式转义 从字符串获取字符-Arduino Arduino char *字符串中的名称 从PC发送字符串到arduino
相关标签
 
粤ICP备18138465号  © 2020-2024 STACKOOM.COM