如何修复xtensa-lx106-elf-g ++：错误：Arduino IDE上无法识别的命令行选项'-std = gnu ++ 17'错误

Question

这是我第一次使用Arduino IDE，这是我的代码：我正在尝试使用NodeMCU板（ESP-12E）上RCSwitch的SendDemo草图，并进行以下配置，

1. 选择; 工具->面板：->（选择您要选择的面板）。 ``通用ESP8266模块''
2. 选择; 工具->闪光模式：->'DIO'
3. 选择; 工具->闪烁频率：->'40MHz'
4. 选择; 工具-> CPU频率：-> '80 MHz'
5. 选择; 工具->闪存大小：->'512K（64K SPIFFS）'
6. 选择; 工具->调试端口：->'已禁用'
7. 选择; 工具->调试级别：->'无'
8. 选择; 工具->重置方法：->'ck'
9. 选择; 工具->上传速度：->'115200'

我一直收到错误xtensa-lx106-elf-g++: error: unrecognized command line option '-std=gnu++17' exit status 1 Error compiling for board NodeMCU 1.0 (ESP-12E Module). 我应该怎么办？

 /*
  Example for different sending methods
  
  https://github.com/sui77/rc-switch/
  
*/

#include <RCSwitch.h>

RCSwitch mySwitch = RCSwitch();

void setup() {

  Serial.begin(9600);
  
  // Transmitter is connected to Arduino Pin #10  
  mySwitch.enableTransmit(10);
  
  // Optional set protocol (default is 1, will work for most outlets)
  // mySwitch.setProtocol(2);

  // Optional set pulse length.
  // mySwitch.setPulseLength(320);
  
  // Optional set number of transmission repetitions.
  // mySwitch.setRepeatTransmit(15);
  
}

void loop() {

  /* See Example: TypeA_WithDIPSwitches */
  mySwitch.switchOn("11111", "00010");
  delay(1000);
  mySwitch.switchOff("11111", "00010");
  delay(1000);

  /* Same switch as above, but using decimal code */
  mySwitch.send(5393, 24);
  delay(1000);  
  mySwitch.send(5396, 24);
  delay(1000);  

  /* Same switch as above, but using binary code */
  mySwitch.send("010100010001010100110011");
  delay(1000);  
    mySwitch.send("010100010001010100110011");
  delay(1000);

  /* Same switch as above, but tri-state code */ 
  mySwitch.sendTriState("00000FFF0F0F");
  delay(1000);  
  mySwitch.sendTriState("00000FFF0FF0");
  delay(1000);

  delay(20000);
}