我无法使用 PlatformIO 在 Visual Studio Code 上初始化我的项目

Question

我正在使用 Visual Studio Code，并添加了 PlatformIO IDE 扩展和 c/c++ 来为我的开发板编写代码，这是一个带有乐鑫物联网开发框架的 uPesy ESP32 Wrovoer DevKit。 一切都符合我的要求，但是当我点击完成时，我收到一条错误消息：

The current working directory C:\Users\brownme1\Documents\PlatformIO\Projects\my_project will be used for the project.

The next files/directories have been created in C:\Users\brownme1\Documents\PlatformIO\Projects\my_project
include - Put project header files here
lib - Put here project specific (private) libraries
src - Put project source files here
platformio.ini - Project Configuration File
Resolving upesy_wrover dependencies...
Already up-to-date.
Updating metadata for the vscode IDE...

Error: Processing upesy_wrover (platform: espressif32; board: upesy_wrover; framework: espidf)
--------------------------------------------------------------------------------
Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/upesy_wrover.html
PLATFORM: Espressif 32 (6.0.0) > uPesy ESP32 Wrover DevKit
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: 
 - framework-espidf @ 3.50000.0 (5.0.0) 
 - tool-cmake @ 3.16.4 
 - tool-esptoolpy @ 1.40400.0 (4.4.0) 
 - tool-idf @ 1.0.1 
 - tool-mconf @ 1.4060000.20190628 (406.0.0) 
 - tool-ninja @ 1.9.0 
 - toolchain-esp32ulp @ 1.23500.220830 (2.35.0) 
 - toolchain-xtensa-esp32 @ 11.2.0+2022r1
Reading CMake configuration...
-- Could NOT find Git (missing: GIT_EXECUTABLE) 
-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
-- The ASM compiler identification is GNU
-- Found assembler: C:/Users/brownme1/.platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc.exe
-- Check for working C compiler: C:/Users/brownme1/.platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc.exe
-- Check for working C compiler: C:/Users/brownme1/.platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc.exe -- broken
-- Configuring incomplete, errors occurred!
See also "C:/Users/brownme1/Documents/PlatformIO/Projects/my_project/.pio/build/upesy_wrover/CMakeFiles/CMakeOutput.log".
See also "C:/Users/brownme1/Documents/PlatformIO/Projects/my_project/.pio/build/upesy_wrover/CMakeFiles/CMakeError.log".

CMake Warning at C:/Users/brownme1/.platformio/packages/framework-espidf/tools/cmake/git_submodules.cmake:4 (message):
 Git executable was not found. Git submodule checks will not be executed.
 If you have any build issues at all, start by adding git executable to the
 PATH and rerun cmake to not see this warning again.
Call Stack (most recent call first):
 C:/Users/brownme1/.platformio/packages/framework-espidf/tools/cmake/idf.cmake:41 (include)
 C:/Users/brownme1/.platformio/packages/framework-espidf/tools/cmake/project.cmake:12 (include)
 CMakeLists.txt:2 (include)


CMake Error at C:/Users/brownme1/.platformio/packages/tool-cmake/share/cmake-3.16/Modules/CMakeTestCCompiler.cmake:60 (message):
 The C compiler

 "C:/Users/brownme1/.platformio/packages/toolchain-xtensa-esp32/bin/xtensa-esp32-elf-gcc.exe"

 is not able to compile a simple test program.

 It fails with the following output:

 Change Dir: C:/Users/brownme1/Documents/PlatformIO/Projects/my_project/.pio/build/upesy_wrover/CMakeFiles/CMakeTmp
 
 Run Build Command(s):C:/Users/brownme1/.platformio/packages/tool-ninja/ninja.exe cmTC_0ae29 && [1/2] Building C object CMakeFiles\cmTC_0ae29.dir\testCCompiler.c.obj

 FAILED: CMakeFiles/cmTC_0ae29.dir/testCCompiler.c.obj 

 C:\Users\brownme1\.platformio\packages\toolchain-xtensa-esp32\bin\xtensa-esp32-elf-gcc.exe -mlongcalls -Wno-frame-address -o CMakeFiles\cmTC_0ae29.dir\testCCompiler.c.obj -c testCCompiler.c

 xtensa-esp32-elf-gcc.exe: fatal error: cannot execute 'c:/users/brownme1/.platformio/packages/toolchain-xtensa-esp32/bin/../lib/gcc/xtensa-esp32-elf/11.2.0/../../../../xtensa-esp32-elf/bin/as.exe': CreateProcess: No such file or directory
 compilation terminated.

 ninja: build stopped: subcommand failed.

 
 

 

 CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
 C:/Users/brownme1/.platformio/packages/framework-espidf/tools/cmake/project.cmake:342 (__project)
 CMakeLists.txt:3 (project)



========================== [FAILED] Took 4.21 seconds ==========================

Answer 1

请尝试仔细阅读错误。 它说你缺少git 。

Git executable was not found. Git submodule checks will not be executed.
 If you have any build issues at all, start by adding git executable to the
 PATH and rerun cmake to not see this warning again.