
[英]Ruby - undefined method `/' for “90 kilograms”:String (NoMethodError)
[英]Libraries for converting physical units (kilograms, pounds) in Ruby?
我知道Rails有一些很好的日期和时间管理助手。 是否有一个已经完成的项目由标准单元及其转换组成或包含干净的DSL? 任何带有助手的项目都可以在两个系统的长度和重量基本单位之间进行转换。 谢谢!
哇,这些比我预期的要多得多。 以下是我认为的完整列表,按字母顺序排列,示例用法从文档中删除。 我还注意到,如果我无法让它们在本地运行。
require 'alchemist' Alchemist.setup 8.miles.to.meters 10.kilometers + 1.mile # 11.609344 kilometers
这个看起来已经过时了,最后一次提交是5年前的事,而且它似乎并没有在1.9.3上运行。
include Measurement::Length Inch.new(12).to_centimeters # => #<Measurement::Length::Centimeter:0x173c2b4 @units=30.48>
require "phys/units" Q = Phys::Quantity U = Phys::Unit Q[1.23,'km'] + Q[4.56,'m'] #=> Phys::Quantity[1.23456,'km'] Q[123,'mile'] / Q[2,'hr'] #=> Phys::Quantity[61,'mile/hr'] Q[61,'miles/hr'].want('m/s') #=> Phys::Quantity[27.26944,'m/s'] Q[1.0,'are'] == Q[10,'m']**2 #=> true
请注意,这个说明它在README中没有生产就绪。
require 'quantity/all' 1.meter #=> 1 meter 1.meter.to_feet #=> 3.28083... foot c = 299792458.meters / 1.second #=> 299792458 meter/second newton = 1.meter * 1.kilogram / 1.second**2 #=> 1 meter*kilogram/second^2 newton.to_feet #=> 3.28083989501312 foot*kilogram/second^2 newton.convert(:feet) #=> 3.28083989501312 foot*kilogram/second^2 jerk_newton = newton / 1.second #=> 1 meter*kilogram/second^3 jerk_newton * 1.second == newton #=> true
请参阅Boris Stitnickey的回答 。
require 'ruby-measurement' measurement = Measurement.parse('3 feet') # => 3.0 ft. measurement.convert_to(:yards) # => 1.0 yd. measurement.convert_to(:in) # => 36.0 in. measurement.convert_to(:inches) # => 36.0 in. measurement1 = Measurement.parse('3 feet') # => 3.0 ft. measurement2 = Measurement.parse('6 inch') # => 6.0 in. measurement1 + measurement2 # => 3.5 ft.
require 'ruby-units' unit = Unit("mm") # unit only (defaults to a scalar of 1) unit = Unit("1 mm") # create a simple unit unit = Unit("1 kg*m^2/s^2") # complex unit unit1 =~ unit2 # true if units are compatible unit1.compatible?(unit2) # true if units are compatible unit1 = unit >> "ft" # convert to 'feet' unit3 = unit1 + unit2 # resulting object will have the units of unit1 unit1 === unit2 # true if units and quantity are the same, even if 'equivalent' by <=> unit.convert_to('ft') # convert (unit1 + unit2).convert_to('ft') # converts result to 'ft'
require 'units' three_meters = 3.meters two_meters = 2.m one_inch = 1.inch 3.meters.to_inches # => 118.1103 inch 10.inches.to_mm # => 254.0 millimeter
require 'unitwise/ext' 1.yard == (1.foot * 3) # => true 1.quart < 1.liter # => true 2.meter + 3.inch - 1.yard # => <Unitwise::Measurement 1.1618 meter> 1.convert_to('kg.m2/s2') == 1.joule # => true (20.kg * 9.8.convert_to('m/s2')).to_pound_force # => <Unitwise::Measurement 44.06255284754326 pound_force> (300.horsepower * 60.second).to_calorie # => <Unitwise::Measurement 3208077.8414151203 calorie>
像另一张海报一样,我无法正常工作。 但是,您可以看到JörgWMittag的使用答案 。
作为Unitwise的作者,可能很明显它是我最喜欢的群体。 不过,我鼓励你至少检查一下。
尝试令人敬畏的炼金术士 。
......
试试gem install sy
require 'sy'
( 5.g * # a bullet of 5g
500.m.s(-1) ** 2 / # flying at a speed of 500m/s has kJ energy:
2 ).in( :kJ ) #=> 0.625
require 'sy/imperial'
1.mile.in :ft #=> 5280.0
1.acre.in :yd² #=> 4840.0
1.gallon.in :l #=> 4.54609
1.lb.in :kg #=> 0.45359237
1.mile².in :km² #=> 2.589988110336
SY::SPEED_OF_LIGHT.in "furlong.fortnight⁻¹" #=> 1802617499785.2544
看看Tom Sawyer的Van / Unit
这是来自主页:
require 'van/units'
include Units
1.mile.to(feet)
1.acre.to(yd**2)
1.acre.to(sq_yd)
1.gallon.to(self.L)
1.lb.to(kg)
1.m.s.to(m.s)
1.sq_mi.to(km**2)
1.mile.to(km)
1.usd.to(twd)
1.bit/s + 8.bytes/s
我无法让Van /单位工作 - 它报告的是:
/Library/Ruby/Gems/1.8/gems/vanunits-1.5.0/lib/van/units/base.rb:493:in`to':来自unitstest.rb的不兼容操作单元(TypeError):4
跑步时
require 'rubygems'
require 'van/units'
include Van::Units puts
1.meter.to(feet)
我花了一个小时试图破解面包车/单位的来源失败。
它所基于的旧宝石开箱即用:
vanunits似乎破碎了。 我建议尝试
rubyunits(http://ruby-units.rubyforge.org/ruby-units/)
要么
测量(https://github.com/collectiveidea/measurement)
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.