简体   繁体   English

Xperia Z3 Usb调试模式在Windows 7 Home Premium x64上不起作用

[英]Xperia Z3 Usb debug mode doesn't work at Windows 7 Home Premium x64

I have an Xperia Z3 (D6603), and tried to connect at debug mode to my computer with Windows 7 Home Premium x64 and it doesn't recognize it, but without debug mode at device it does it; 我有一个Xperia Z3(D6603),并尝试通过Windows 7 Home Premium x64在调试模式下连接到我的计算机,但它无法识别它,但是在设备上没有调试模式下可以运行它。 even the PC Companion doesn't recognize the Z3 device when is in debug mode. 在调试模式下,甚至PC Companion也无法识别Z3设备。

I also downloaded the USB driver for the Z3 from ( http://developer.sonymobile.com/downloads/drivers/xperia-z3-driver/ ) and tried to install from Device Administrator but doesn't recognize for the Z3. 我还从( http://developer.sonymobile.com/downloads/drivers/xperia-z3-driver/ )下载了Z3的USB驱动程序,并尝试从设备管理器进行安装,但无法识别Z3。 I installed the driver "manually" from System Symbol but when try install the Z3 still unrecognize it. 我从系统符号“手动”安装了驱动程序,但尝试安装Z3时仍无法识别。

I also have an Xperia ZL, i activated the debug mode, plugged and it worked. 我也有一个Xperia ZL,我激活了调试模式,接通电源,它开始工作。

Please tell me what can i do to fix this, thank you very much. 请告诉我该怎么做才能解决此问题,非常感谢。

Update 1: I tried install the downloaded driver without debug mode and it works, only happens with debug mode activated. 更新1:我尝试在没有调试模式的情况下安装下载的驱动程序,并且它只能在激活调试模式的情况下工作。 I forgot mention that my device is encrypted, maybe can disturb with debug mode. 我忘了提及我的设备已加密,可能会干扰调试模式。

Update 2: I reinstalled the OS using PC Companion and formated the Micro SD, also tried without encrypt the system and doesn't work. 更新2:我使用PC Companion重新安装了操作系统并格式化了Micro SD,也尝试了不对系统进行加密并且无法正常工作的情况。 Also i installed the drivers downloaded published at November 21, i used DPInst.exe. 我还安装了11月21日发布的下载驱动程序,我使用了DPInst.exe。

I really need help with this issue, but Sony doesn't answer. 对于这个问题,我确实需要帮助,但Sony没有回答。

Try to setup the drivers with flashtool flashtool.net and go to the development settings from the device and clean the settings from USB Debugging. 尝试使用flashtool flashtool.net设置驱动程序,然后从设备转到开发设置,然后从USB调试中清除设置。 Then try it again. 然后再试一次。

I let the problem some weeks, i worked with the ZL. 我让问题解决了几周,我与ZL合作。 But i don't have other machine for work, so i decided use a VM, and it works fine. 但是我没有其他机器可以工作,所以我决定使用VM,并且工作正常。

I suppose i have problems with some drivers at the host machine. 我想我在主机上的某些驱动程序有问题。

So, if you have my problem, use another machine :-), if can't, virtualize. 因此,如果您遇到问题,请使用另一台计算机:-),如果不能,请进行虚拟化。

声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.

 
粤ICP备18138465号  © 2020-2024 STACKOOM.COM