Apache 不允许从网络上的其他设备访问

Question

Before I start, I'd like to let you all know that I have read dozens of articles regarding this subject, unfortunately I was not able to find the right answer, half of the posts are not even answered.

To the point, I am trying to access some sites that are hosted on my local machine, I am using WAMP server and only trying to access the server from devices that are on the same network. After reading some of the articles, I realized that none of the devices are getting past the firewall on my local machine, so I created a new rule and opened port 80 for a specific site (HTTP). Now all devices that are trying to access the server are getting past the firewall, that is NOT the problem any more. The problem now is that APACHE itself will not allow access, I just get stuck on a page with the following message

You don't have permission to access /whatever on this server.
Apache/2.4.17(Win64) PHP/5.6.16 Server at 192.168.0.111 Port 80

Here's my httpd.conf file, if somebody could take a peek I'd really appreciate it

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion. ServerSignature On ServerTokens Full

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
# 
ServerRoot "C:/wamp64/bin/apache/apache2.4.17"

Define APACHE24 Apache2.4

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 192.168.0.111:80
Listen *:80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
# 
LoadModule access_compat_module modules/mod_access_compat.so 
LoadModule actions_module modules/mod_actions.so 
LoadModule alias_module modules/mod_alias.so 
LoadModule allowmethods_modulemodules/mod_allowmethods.so 
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so 
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule authn_anon_module modules/mod_authn_anon.so 
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so 
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so 
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so 
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so 
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so 
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so 
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_socache_module modules/mod_cache_socache.so 
LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cern_meta_module modules/mod_cern_meta.so 
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so 
LoadModule deflate_module modules/mod_deflate.so 
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so 
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so 
LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule http2_module modules/mod_http2.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so 
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so 
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so 
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
#LoadModule macro_module modules/mod_macro.so 
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so 
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so 
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so 
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so 
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so 
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so

LoadModule php5_module "C:/wamp64/bin/php/php5.6.16/php5apache2_4.dll"

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
# User daemon Group daemon

</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
# ServerAdmin admin@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# 
ServerName localhost:80

HostnameLookups Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
# 
DocumentRoot "C:/wamp64/www"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
# 
<Directory />
 AllowOverride none
 Require all granted
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

<Directory "C:/wamp64/www">
 #
 # Possible values for the Options directive are "None", "All",
 # or any combination of:
 #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
 #
 # Note that "MultiViews" must be named *explicitly* --- "Options All"
 # doesn't give it to you.
 #
 # The Options directive is both complicated and important.  Please see
 # http://httpd.apache.org/docs/2.4/mod/core.html#options
 # for more information.
 #
 Options Indexes FollowSymLinks

 #
 # AllowOverride controls what directives may be placed in .htaccess files.
 # It can be "All", "None", or any combination of the keywords:
 #   AllowOverride FileInfo AuthConfig Limit
 #
 AllowOverride all

 #
 # Controls who can get stuff from this server.
 #
 Require all granted
#   onlineoffline tag - don't remove
 Require all granted 
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# 
<IfModule dir_module>
 DirectoryIndex index.php index.php3 index.html index.htm 
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
# 
<Files ".ht*">
 Require all denied 
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
#ErrorLog "logs/error.log"
ErrorLog "C:/wamp64/logs/apache_error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
# LogLevel warn

<IfModule log_config_module>
 #
 # The following directives define some format nicknames for use with
 # a CustomLog directive (see below).
 #
 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
 LogFormat "%h %l %u %t \"%r\" %>s %b" common

 <IfModule logio_module>
   # You need to enable mod_logio.c to use %I and %O
   LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" 

combinedio
 </IfModule>

 #
 # The location and format of the access logfile (Common Logfile Format).
 # If you do not define any access logfiles within a <VirtualHost>
 # container, they will be logged here.  Contrariwise, if you *do*
 # define per-<VirtualHost> access logfiles, transactions will be
 # logged therein and *not* in this file.
 #
 CustomLog "C:/wamp64/logs/access.log" common

 #
 # If you prefer a logfile with access, agent, and referer information
 # (Combined Logfile Format) you can use the following directive.
 #
 #CustomLog "logs/access.log" combined 
</IfModule>

<IfModule alias_module>
 #
 # Redirect: Allows you to tell clients about documents that used to
 # exist in your server's namespace, but do not anymore. The client
 # will make a new request for the document at its new location.
 # Example:
 # Redirect permanent /foo http://www.example.com/bar

 #
 # Alias: Maps web paths into filesystem paths and is used to
 # access content that does not live under the DocumentRoot.
 # Example:
 # Alias /webpath /full/filesystem/path
 #
 # If you include a trailing / on /webpath then the server will
 # require it to be present in the URL.  You will also likely
 # need to provide a <Directory> section to allow access to
 # the filesystem path.

 #
 # ScriptAlias: This controls which directories contain server scripts.
 # ScriptAliases are essentially the same as Aliases, except that
 # documents in the target directory are treated as applications and
 # run by the server when requested rather than as documents sent to the
 # client.  The same rules about trailing "/" apply to ScriptAlias
 # directives as to Alias.
 #
 ScriptAlias /cgi-bin/ "C:/wamp64/cgi-bin/"

</IfModule>

<IfModule cgid_module>
 #
 # ScriptSock: On threaded servers, designate the path to the UNIX
 # socket used to communicate with the CGI daemon of mod_cgid.
 #
 #Scriptsock cgisock 
</IfModule>

#
# "c:/Apache24/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
# 
<Directory "C:/wamp64/cgi-bin">
 AllowOverride None
 Options None
 Require all granted 
</Directory>

<IfModule mime_module>
 #
 # TypesConfig points to the file containing the list of mappings from
 # filename extension to MIME-type.
 #
 TypesConfig conf/mime.types

 #
 # AddType allows you to add to or override the MIME configuration
 # file specified in TypesConfig for specific file types.
 #
 #AddType application/x-gzip .tgz
 #
 # AddEncoding allows you to have certain browsers uncompress
 # information on the fly. Note: Not all browsers support this.
 #
 AddEncoding x-compress .Z
 AddEncoding x-gzip .gz .tgz
 #
 # If the AddEncoding directives above are commented-out, then you
 # probably should define those extensions to indicate media types:
 #
 AddType application/x-compress .Z
 AddType application/x-gzip .gz .tgz
 AddType application/x-httpd-php .php
 AddType application/x-httpd-php .php3

 #
 # AddHandler allows you to map certain file extensions to "handlers":
 # actions unrelated to filetype. These can be either built into the server
 # or added with the Action directive (see below)
 #
 # To use CGI scripts outside of ScriptAliased directories:
 # (You will also need to add "ExecCGI" to the "Options" directive.)
 #
 #AddHandler cgi-script .cgi

 # For type maps (negotiated resources):
 #AddHandler type-map var

 #
 # Filters allow you to process content before it is sent to the client.
 #
 # To parse .shtml files for server-side includes (SSI):
 # (You will also need to add "Includes" to the "Options" directive.)
 #
 #AddType text/html .shtml
 #AddOutputFilter INCLUDES .shtml 
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
# EnableMMAP off EnableSendfile off

# AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
# will not recycle sockets between connections. This is useful for network
# adapters with broken driver support, as well as some virtual network
# providers such as vpn drivers, or spam, virus or spyware filters. AcceptFilter http none AcceptFilter https none

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts 
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1 
<IfModule 
proxy_html_module> Include conf/extra/proxy-html.conf 
</IfModule>

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
# 
<IfModule ssl_module> 
SSLRandomSeed startup builtin 
SSLRandomSeed connect builtin 
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>

Include "C:/wamp64/alias/*"

Here's the httpd-vhosts.conf file as you requested, also I added two lines to the hosts file

127.0.0.1 localhost
127.0.0.1   parenje.local
::1 parenje.local

httpd-vhosts.conf

<VirtualHost *:80>
      ServerName localhost
      DocumentRoot C:/wamp64/www
          <Directory  "C:/wamp64/www/">
              Options Indexes FollowSymLinks MultiViews
              AllowOverride All
              Require local
      </Directory>
</VirtualHost>

<VirtualHost *:80>
      ServerName parenje.local
      DocumentRoot c:/wamp64/www/parenje-yu.com
      <Directory "c:/wamp64/www/parenje-yu.com/">
              Options Indexes FollowSymLinks MultiViews
                AllowOverride All
                Require local
        </Directory>
</VirtualHost>

I tried adding Require ip 192.168.0 to the virtual host, but it didn't work... The page is just endlessly loading

EDIT:
Just realized, once I add virtual host that is to say once I uncomment this line in the httpd.conf file

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

I am no longer able to access the server, not even the homepage. And I am only talking about other devices on the same network, once I comment out the line, then I am only able to access the homepage... Don't understand what's going on...

Answer 1

Ok

Comment this line

#Listen 192.168.0.111:80
Listen *:80

The * in Listen *:80 says listen to any ip address so first line is unnecessary

This change you did is actually dangerous

<Directory />
   AllowOverride none
   Require all granted
</Directory>

It should be as replaced by

<Directory />
    AllowOverride none
    Require all denied
</Directory>

The <Directory /> section controls access to the root folder of the drive Apache is installed on ie / . If you get hacked, changing it to Require all granted would allow the hacker full access to your whole drive. Standard practice with Apache is deny access to everything and then give it access to ONLY what it needs!!! This section is the one that locks everything down initially, we give access later.

This change is probably confusing Apache, as you have used Require all granted twice

#
# Controls who can get stuff from this server.
#
 Require all granted
#   onlineoffline tag - don't remove
 Require all granted 
</Directory>

Change to

    #
    # Controls who can get stuff from this server.
    #

#   onlineoffline tag - don't remove
    Require local
</Directory>

Unless you want to access the server from any ip in the universe dont use Require all granted as Require local should allow access from only the PC running WAMPServer. Until you think you are ready to let the world into your server this is safer.

If you want to allow access from other PC's on your local network you could do this instead.

#   onlineoffline tag - don't remove
    Require local
    Require ip 192.168.0

This section looks like its been damaged

<IfModule logio_module>
   # You need to enable mod_logio.c to use %I and %O
   LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" 

combinedio
 </IfModule>

It should be

   <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

Also looks like you have messed this section up, it should be

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile off

This

Include conf/extra/httpd-vhosts.conf

looks like you are trying to include at least one Virtual Host , great idea, but you had better show us conf/extra/httpd-vhosts.conf as well

Suggestion:

If you are using Windows standard editor ie notepad.exe dont! Instead download a decent text editor, my suggestion would be notepad++ its free and a very good editor, and great for PHP coding.

Your HOSTS File should have a reference for each site on both IPV4 and IPV6

127.0.0.1 localhost
127.0.0.1   parenje.local

::1 localhost
::1 parenje.local

Now to access your parenje.local local site from another PC on you network you have to use the URL parenje.local but that other PC of course does not know anything about parenje.local unless you have a local DNS Server?

So the simple way to do this is to add this HOSTS file to all your other PC's

Assuming your WAMPServer PC is running on 192.168.0.10

192.168.0.10 parenje.local

This Virtual host could be changed to

<VirtualHost *:80>
    ServerName parenje.local
    DocumentRoot c:/wamp64/www/parenje-yu.com
    <Directory "c:/wamp64/www/parenje-yu.com/">
       Options Indexes FollowSymLinks MultiViews
       AllowOverride All
       Require local
       Require ip 192.168.0
   </Directory>
</VirtualHost>

Assuming your running on a 192.168.0 subnet

Answer 2

If you sure the settings are correct, type command dmesg , and if there are errors, reboot the server. For me it helped.