[英]Why is my Rails site failing to push to Heroku?
I have a Rails site which previously deployed without a problem to Heroku. 我有一个Rails站点,该站点以前没有问题地部署到Heroku。 It worked fine until I added the following code to the
production.rb
file in order to make SendGrid work correctly. 在我将以下代码添加到
production.rb
文件中以使SendGrid正常工作之前,它工作正常。
Rails.application.configure do
ActionMailer::Base.smtp_settings = {
:address => 'smtp.sendgrid.net',
:port => '587',
:authentication => :plain,
:user_name => ENV['SENDGRID_USERNAME'],
:password => ENV['SENDGRID_PASSWORD'],
:domain => 'heroku.com',
:enable_starttls_auto => true
}
end
When I add this code the git push heroku master
fails to push to Heroku. 当我添加此代码时,
git push heroku master
无法推送到Heroku。
However, the git push origin master
works fine. 但是,
git push origin master
可以正常工作。 What could possibly be going wrong? 可能出什么问题了?
Here is the build log from Heroku: 这是Heroku的构建日志:
Rails.application.configure do
ActionMailer::Base.smtp_settings = {
:address => 'smtp.sendgrid.net',
:port => '587',
:authentication => :plain,
:user_name => ENV['SENDGRID_USERNAME'],
:password => ENV['SENDGRID_PASSWORD'],
:domain => 'heroku.com',
:enable_starttls_auto => true
}
end
# more code here
# Settings specified here will take precedence over those in config/application.rb.
# Code is not reloaded between requests.
config.cache_classes = true
# Eager load code on boot. This eager loads most of Rails and
# your application in memory, allowing both threaded web servers
# and those relying on copy on write to perform better.
# Rake tasks automatically ignore this option for performance.
config.eager_load = true
# Full error reports are disabled and caching is turned on.
config.consider_all_requests_local = false
config.action_controller.perform_caching = true
# Disable serving static files from the `/public` folder by default since
# Apache or NGINX already handles this.
config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
# Compress JavaScripts and CSS.
config.assets.js_compressor = :uglifier
# config.assets.css_compressor = :sass
# Do not fallback to assets pipeline if a precompiled asset is missed.
config.assets.compile = false
# `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
# Enable serving of images, stylesheets, and JavaScripts from an asset server.
# config.action_controller.asset_host = 'http://assets.example.com'
# Specifies the header that your server uses for sending files.
# config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
# config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
# Mount Action Cable outside main process or domain
# config.action_cable.mount_path = nil
# config.action_cable.url = 'wss://example.com/cable'
# config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
# Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
# config.force_ssl = true
# Use the lowest log level to ensure availability of diagnostic information
# when problems arise.
config.log_level = :debug
# Prepend all log lines with the following tags.
config.log_tags = [ :request_id ]
# Use a different cache store in production.
# config.cache_store = :mem_cache_store
# Use a real queuing backend for Active Job (and separate queues per environment)
# config.active_job.queue_adapter = :resque
# config.active_job.queue_name_prefix = "AcuSimonv_#{Rails.env}"
config.action_mailer.perform_caching = false
# Ignore bad email addresses and do not raise email delivery errors.
# Set this to true and configure the email server for immediate delivery to raise delivery errors.
# config.action_mailer.raise_delivery_errors = false
# Enable locale fallbacks for I18n (makes lookups for any locale fall back to
# the I18n.default_locale when a translation cannot be found).
config.i18n.fallbacks = true
# Send deprecation notices to registered listeners.
config.active_support.deprecation = :notify
# Use default logging formatter so that PID and timestamp are not suppressed.
config.log_formatter = ::Logger::Formatter.new
# Use a different logger for distributed setups.
# require 'syslog/logger'
# config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
if ENV["RAILS_LOG_TO_STDOUT"].present?
logger = ActiveSupport::Logger.new(STDOUT)
logger.formatter = config.log_formatter
config.logger = ActiveSupport::TaggedLogging.new(logger)
end
# Do not dump schema after migrations.
config.active_record.dump_schema_after_migration = false
end
EDIT: production.rb file below
Rails.application.configure do
ActionMailer::Base.smtp_settings = {
:address => 'smtp.sendgrid.net',
:port => '587',
:authentication => :plain,
:user_name => ENV['SENDGRID_USERNAME'],
:password => ENV['SENDGRID_PASSWORD'],
:domain => 'heroku.com',
:enable_starttls_auto => true
}
# Settings specified here will take precedence over those in config/application.rb.
# Code is not reloaded between requests.
config.cache_classes = true
# Eager load code on boot. This eager loads most of Rails and
# your application in memory, allowing both threaded web servers
# and those relying on copy on write to perform better.
# Rake tasks automatically ignore this option for performance.
config.eager_load = true
# Full error reports are disabled and caching is turned on.
config.consider_all_requests_local = false
config.action_controller.perform_caching = true
# Disable serving static files from the `/public` folder by default since
# Apache or NGINX already handles this.
config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
# Compress JavaScripts and CSS.
config.assets.js_compressor = :uglifier
# config.assets.css_compressor = :sass
# Do not fallback to assets pipeline if a precompiled asset is missed.
config.assets.compile = false
# `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
# Enable serving of images, stylesheets, and JavaScripts from an asset server.
# config.action_controller.asset_host = 'http://assets.example.com'
# Specifies the header that your server uses for sending files.
# config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
# config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
# Mount Action Cable outside main process or domain
# config.action_cable.mount_path = nil
# config.action_cable.url = 'wss://example.com/cable'
# config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
# Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
# config.force_ssl = true
# Use the lowest log level to ensure availability of diagnostic information
# when problems arise.
config.log_level = :debug
# Prepend all log lines with the following tags.
config.log_tags = [ :request_id ]
# Use a different cache store in production.
# config.cache_store = :mem_cache_store
# Use a real queuing backend for Active Job (and separate queues per environment)
# config.active_job.queue_adapter = :resque
# config.active_job.queue_name_prefix = "AcuSimonv_#{Rails.env}"
config.action_mailer.perform_caching = false
# Ignore bad email addresses and do not raise email delivery errors.
# Set this to true and configure the email server for immediate delivery to raise delivery errors.
# config.action_mailer.raise_delivery_errors = false
# Enable locale fallbacks for I18n (makes lookups for any locale fall back to
# the I18n.default_locale when a translation cannot be found).
config.i18n.fallbacks = true
# Send deprecation notices to registered listeners.
config.active_support.deprecation = :notify
# Use default logging formatter so that PID and timestamp are not suppressed.
config.log_formatter = ::Logger::Formatter.new
# Use a different logger for distributed setups.
# require 'syslog/logger'
# config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
if ENV["RAILS_LOG_TO_STDOUT"].present?
logger = ActiveSupport::Logger.new(STDOUT)
logger.formatter = config.log_formatter
config.logger = ActiveSupport::TaggedLogging.new(logger)
end
# Do not dump schema after migrations.
config.active_record.dump_schema_after_migration = false
end
Running: rake assets:precompile
运行:耙资产:预编译
rake aborted!
耙子流产了!
SyntaxError: /tmp/build_5cbe4a41cfc117d8718d04c4287ffbda/config/environments/production.rb:100: syntax error, unexpected end-of-input, expecting keyword_end
语法错误:/tmp/build_5cbe4a41cfc117d8718d04c4287ffbda/config/environments/production.rb:100:语法错误,意外的输入结束,期望使用keyword_end
The error message states that there's a missing end
keyword on line 100 in your production.rb
file. 错误消息指出在
production.rb
文件的第100行上缺少end
关键字。 Add that, commit changes, then push again. 添加它,提交更改,然后再次推送。
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.