[英]How in type C-< or C-> in Emacs run inside iTerm2 on Mac Sierra
multiple-cursors demonstrate to configure C-<
C->
to do the mark. 多光标演示如何配置C-<
C->
进行标记。
However, I can't type those keys into my Emacs, I googled this issue , and suspect those keystrokes are captured by Mac or iTerm itself. 但是,我无法在我的Emacs中键入这些键,我在此问题上进行了搜索 ,并怀疑这些键击是由Mac或iTerm本身捕获的。 I did several tries: 我做了几次尝试:
First start emacs in -q
, and use Ch k
to check what emacs got, M-<
works as expected, but when I type C-<
, emacs only receive ,
I also try this in Terminal.app, it's the same issue. 首先在-q
启动emacs,并使用Ch k
检查得到的emacs, M-<
可以按预期工作,但是当我键入C-<
,emacs只接收,
我也在Terminal.app中尝试了此操作,这是相同的问题。
Could anyone share some experience about how to configure Emacs running inside terminal to solve this? 谁能分享一些有关如何配置在终端中运行的Emacs来解决此问题的经验? Thanks in advanced. 提前致谢。
Some environment: 一些环境:
For anyone else who came across this issue, try this solution: 对于遇到此问题的其他任何人,请尝试以下解决方案:
https://stackoverflow.com/a/40222318/2163429 https://stackoverflow.com/a/40222318/2163429
I succeed with iTerm2. 我使用iTerm2成功。
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.