[英]Automation Anywhere\System file not found in repository in PUBLIC workspace
I just had that same problem, Im using the cloud AA Community Edition on Windows Chrome .我刚刚遇到了同样的问题,我在 Windows Chrome 上使用云 AA 社区版。
I really dont know a concrete solution for the problem, but somehow I did the whole setup process again and finally worked .我真的不知道该问题的具体解决方案,但不知何故,我再次完成了整个设置过程,终于成功了。
Here I will number the steps I followed, hoping they can help you too.在这里,我将编号我遵循的步骤,希望它们也可以帮助你。
First of all, make sure you are using Google Chrome .首先,确保您使用的是Google Chrome 。 I was using Edge at first, then switched to Opera and none of them worked for me.我最初使用 Edge,然后切换到 Opera,但它们都不适合我。
AutomationAnywhereBotAgent
, allow the chrome extension, wait for your device to appear fully connected connected device sample ).重新启动后,重新登录到控制室并开始添加您的本地设备,再次(下载AutomationAnywhereBotAgent
,允许 chrome 扩展,等待您的设备出现完全连接的连接设备示例)。capture
function.安装并连接所有内容后,您应该在使用capture
功能之前测试您的机器人。 In other words, just run your bot without the problematic function.换句话说,只需运行没有问题功能的机器人即可。 NOTE : I really recommend to not test the capture
function yet.注意:我真的建议不要测试capture
功能。 Only try it after the restart, because I reinstalled and tried the whole set up proccess several times, testing the capture
function without waiting to restart and the problem persisted.重启后才试,因为我重装了几次,整个设置过程都试了好几次,没等重启就测试了capture
功能,问题依旧。
capture
function and continue selecting the window you need without that error.回到控制室,验证本地设备状态为“已连接”,测试机器人,您应该能够使用capture
功能并继续选择您需要的窗口而不会出现该错误。
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.