msaccess 报告打印预览进入无限循环
[英]msaccess report print preview goes into endless loop
问题描述
MsAccess - Office Professional 2019 
MsAccess - Office 专业版 2019
My reports have suddenly started behaving in a strange way.我的报告突然开始表现得很奇怪。 All work perfectly in report view mode and, up to today, have been fine in print preview mode.所有这些都可以在报告视图模式下完美运行，并且直到今天，在打印预览模式下都可以正常工作。 Now print preview is going mad: There are 3 variations:现在打印预览快疯了：有 3 种变化：
- Some reports are ok.有些报告还可以。
- Some reports go into an endless loop and the only way out is to kill access.一些报告 go 进入无限循环，唯一的出路是终止访问。
- Some reports present with a very narrow single column report with no info (screen dump attached).一些报告显示一个非常窄的单列报告，没有任何信息（附加屏幕转储）。 If I click through the pages each page shows up the same and when I get to the last page it goes into an endless loop and I have to kill access.如果我点击页面，每个页面显示相同，当我到达最后一页时，它会进入无限循环，我必须终止访问。 (Possibly this is the same as 2 above if the report is more than 1 page). （如果报告超过 1 页，这可能与上面的 2 相同）。
1 个解决方案
解决方案1
0 2022-09-13 10:47:43
SOLVED.解决了。 Print preview appears to default the assumed printer for formatting to last printer (driver) used by the pc.打印预览似乎默认假定的打印机格式化为电脑使用的最后一个打印机（驱动程序）。 In my case I had not printed anything since producing some plant labels on a Brother p-touch a few days before - maximum width 125mm..!.就我而言，自从几天前在 Brother p-touch 上制作了一些植物标签后，我没有打印任何东西 - 最大宽度 125 毫米......！ Hence the long and very narrow page.因此页面又长又窄。 I printed something to a 'proper' printer from another application and hey presto - everything worked again.我从另一个应用程序将一些东西打印到“正确”的打印机上，嘿，一切都恢复了。
声明:本站的技术帖子网页，遵循CC BY-SA 4.0协议，如果您需要转载，请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.