简体   繁体   English

使用iMac作为机器创建私有云(Eucalyptus)

[英]Using iMac as a machine to create a Private Cloud (Eucalyptus)

I am trying to use two iMac 2011 core i5 to create a private cloud as they are only 64bit machines that I have now. 我正在尝试使用两个iMac 2011核心i5来创建私有云,因为它们现在只有64位机器。 I planed to use one for CLC and another one for Node controller. 我计划用一个用于CLC,另一个用于Node控制器。 I tried to installed Eucalyptus cloud from Ubuntu 10.04 server CDinstaller. 我试图从Ubuntu 10.04服务器CDinstaller安装Eucalyptus云。 I can installed it on Paralle but fail on the real machine as every time because I cannot pass Network detection step as it shows Ubuntu cannot contact DHCP server. 我可以在Paralle上安装它,但每次都在真机上失败,因为我无法通过网络检测步骤,因为它显示Ubuntu无法联系DHCP服务器。 But these steps can be done on Paralle and VM. 但这些步骤可以在Paralle和VM上完成。 And has no problem when I installed Ubuntu 12.04 server on both real machine and VM. 当我在真机和VM上安装Ubuntu 12.04服务器时没有问题。 So I wonder if iMac is suitable to use as a Machune for UEC? 所以我想知道iMac是否适合用作UEC的Machune?

And another question is when I tried to install Node controller on VM / Paralle during the steps it shows "The hardware doesn't support virtualization, Eucalyptus running on this hardware will be unaccelerated". 另一个问题是当我尝试在VM / Paralle上安装Node控制器时,它显示“硬件不支持虚拟化,在此硬件上运行的Eucalyptus将无法加速”。 How should I do for these problems? 我该怎么做这些问题? And what is the machine that support virtualization (let says if I can use iMac for this project, what I have to adapt to. Or any command lines to solve the problems.) 什么是支持虚拟化的机器(如果我可以将iMac用于此项目,我必须适应。或者任何命令行来解决问题。)

Thank you. 谢谢。

== My iMac specs http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.7-21-inch-aluminum-mid-2011-thunderbolt-specs.html ==我的iMac规格http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.7-21-inch-aluminum-mid-2011-thunderbolt-specs.html

我不认为你可以在Mac上运行Eucalyptus。

It looks to me like the question is about installing on the physical box - not be confused with trying to install it on the Mac OSX environment. 在我看来,问题是关于在物理盒上安装 - 不要与尝试在Mac OSX环境中安装它混淆。 Given that the physical device will have an x68 based chip I don't see a reason why this wouldn't be possible. 鉴于物理设备将具有基于x68的芯片,我没有看到为什么这是不可能的原因。

Is the target iMac physically connected to the network? 目标iMac是否物理连接到网络? I ask because on my test laptop (ThinkPad) I've noticed that installing Euca using just the wireless NIC won't work. 我问,因为在我的测试笔记本电脑(ThinkPad)上我注意到只使用无线网卡安装Euca是行不通的。 Or is more difficult than I wanted to deal with ;-) 或者比我想要处理的更困难;-)

And I'd bet that the virtualized methods you tried (ie Parallells) got further because it faked a hardwired NIC AND the your underlying environment was already properly configured to see the DHCP server.this 我敢打赌,你尝试过的虚拟化方法(即Parallells)进一步发展,因为它伪造了一个硬连线的网卡,你的底层环境已经正确配置,可以看到DHCP服务器。这个

As Vasya said, Eucalyptus is not designed to run on Mac. 正如Vasya所说,Eucalyptus不适合在Mac上运行。 Using cloud in a box it may be possible, but you will need a lot of digging into Mac to set up the network and the nested virutalization needed to pull that off. 在盒子中使用云可能是可能的,但是你需要大量挖掘Mac才能建立网络,并需要嵌套的虚拟化来实现这一目标。

声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.

 
粤ICP备18138465号  © 2020-2024 STACKOOM.COM