[英]Homework, Recursive BST insert function in C
这是我上c课的第一堂课。 它专注于以bst形式在c中进行动态分配。
我必须有一个动态分配的BST,以递归方式实现。 我知道遍历正常,并且在插入节点时遇到问题。 我只有根节点,而每个其他节点似乎都设置为NULL。 我认为遍历时无法打印其余节点,因为我正在尝试访问NULL结构的数据成员。 到目前为止,我的代码如下:
void insert_node(TreeNode** root, int toInsert){
if(*root==NULL){
TreeNode *newnode = (TreeNode *)malloc(sizeof(TreeNode));
newnode->data = toInsert;
newnode->left = NULL;
newnode->right = NULL;
}
else if(toInsert > (*root)->data){ //if toInsert greater than current
struct TreeNode **temp = (TreeNode **)malloc(sizeof(struct TreeNode*));
*temp = (*root)->right;
insert_node(temp, toInsert);
}
else{ //if toInsert is less than or equal to current
struct TreeNode **temp = (TreeNode **)malloc(sizeof(struct TreeNode*));
*temp = (*root)->left;
insert_node(temp, toInsert);
}
}
void build_tree(TreeNode** root, const int elements[], const int count){
if(count > 0){
TreeNode *newroot = (TreeNode *)malloc(sizeof(TreeNode));
newroot->data = elements[0];
newroot->left = NULL;
newroot->right = NULL;
*root = newroot;
for(int i = 1; i < count; i++){
insert_node(root, elements[i]);
}
}
我确定这只是许多问题之一,但是在使用“(* root)-> data”的任何行上都会出现分段错误,我不确定为什么。
附带说明一下,尽管在“(* root)-> data”行中遇到分段错误,但我仍然能够打印“(* root)-> data”。 如何打印该值,但仍然出现分段错误?
太乱了 有些事情可能会有所帮助
1)不需要使用TreeNode * (指向指针的指针)作为参数。 使用jsut TreeNode 。 (这里出错了,因为它是文本编辑器的某些功能,请考虑在此行中的每个TreeNode之后加上*)
2)不是严格的规则,但是作为最佳实践,请避免使用链接列表的第一个节点来存储实际值。 仅用作列表的标题。 原因是,如果您需要删除此节点,则不会丢失列表。 只是一个提示
3)在您的第一个函数中,如果* root == NULL,我宁愿使函数失败,也不愿将其添加到临时列表中(该函数在当前代码中丢失了,请参见将值添加到不是被传递到函数之外。
4)好吧,实际上,如果新值大于节点,则实际上使它移到右边,如果新值小于节点,则使它移到左边,但是它永远不会停止。 参见以下示例:假设您具有列表1-> 3-> 4。 现在您要插入2。该算法将执行什么操作? 继续尝试在1节点和3节点中插入,在它们之间切换,但不要实际插入任何东西。 解决方案:在自底向上构建此列表时,将始终对列表进行排序(如果您正确插入了节点)。 因此,您只需要检查下一个节点是否更高,如果更高,请在您要插入的位置正确插入。
5)如果要传递TreeNode * root作为参数(在第二个函数上),则不必重新创建新列表并使root = newlist。 只需使用根即可。 所有这些都会导致(未测试,可能有一些错误):
void insert_node(TreeNode* root, int toInsert){
if(root==NULL){
printf("Error");
return;
}
TreeNode* temp = root; //I just don't like to mess with the original list, rather do this
if(temp->right!=NULL && toInsert > temp->right->data){ //if toInsert greater than next
insert_node(temp->right, toInsert);
}
else{ //if toInsert is less or equal than next node
TreeNode* temp2 = temp->right; //grabbing the list after this node
temp->right=(TreeNode*)malloc(sizeof(TreeNode)); //making room for the new node
temp->right->right=temp2; //putting the pointer to the right position
temp->right->left=temp; //setting the left of the next node to the current
temp->right->data=toInsert;
}
}
void build_tree(TreeNode* root, const int elements[], const int count){
if(count > 0){
for(int i = 0; i < count; i++){
insert_node(root, elements[i]);
}
}
}
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.