如何在Arduino中获得连续的LED闪光灯？ [C / C ++]

Question

我有一个简单的Arduino程序，每5秒钟将温度传感器的传感器值上传到Google Spreadsheet。 一切正常。 我有3个LED。 一种在设置完成后永久打开，另一种在上载值时闪烁，而另一种在完成上传后持续3秒钟。

我的问题是我无法弄清楚在上载值时如何使第3针LED闪烁。 无论我在哪里放置它，它似乎只运行一次，然后继续执行该程序的其余部分。 我意识到这是一个非常基本的逻辑问题，但我无法弄清楚，将不胜感激！

这是主程序。

/* Setup shield-specific #include statements */
#include <SPI.h>
#include <WiFi.h>
#include <WiFiClient.h>
#include <Temboo.h>
#include "TembooArduino.h" // Contains Temboo account information


WiFiClient client;

int numRuns = 1;   // Execution count, so this doesn't run forever
int maxRuns = 3;   // Maximum number of times the Choreo should be executed


void setup() {
  Serial.begin(9600);
  pinMode(A0,INPUT);
  pinMode(4, OUTPUT);
  digitalWrite(4, LOW);
  pinMode(3, OUTPUT);
  digitalWrite(3, LOW);
  pinMode(2, OUTPUT);
  digitalWrite(2, LOW);
  // For debugging, wait until the serial console is connected.
  delay(4000);
  while(!Serial);

  int wifiStatus = WL_IDLE_STATUS;

  // Determine if the WiFi Shield is present.
  Serial.print("\n\nShield:");
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("FAIL");

    // If there's no WiFi shield, stop here.
    while(true);
  }

  Serial.println("OK");

  // Try to connect to the local WiFi network.
  while(wifiStatus != WL_CONNECTED) {
    Serial.print("WiFi:");
    wifiStatus = WiFi.begin(WIFI_SSID, WPA_PASSWORD);

    if (wifiStatus == WL_CONNECTED) {
      Serial.println("OK");
    } else {
      Serial.println("FAIL");
    }
    delay(5000);
  }

  Serial.println("Setup complete.\n");
  digitalWrite(4,HIGH);
}

void loop() {
    if (numRuns <= maxRuns)
      { 
    Serial.println("Running AppendRow - Run #" + String(numRuns++) + "\n");

    int sensorVal = analogRead(A0);

    //two lines to test the sensor value in serial output 
    Serial.print("sensor Value: "); 
    Serial.print(sensorVal);

    float voltage = (sensorVal/1024.0) * 5.0; //testing voltage output in serial 

    Serial.print(", volts "); 
    Serial.print(voltage); 

    float temperature = (voltage - .5) * 100; 

    Serial.print(", temperature in C ");
    Serial.print(temperature);
    Serial.print("\n");

    TembooChoreo AppendRowChoreo(client);


    // Invoke the Temboo client
    AppendRowChoreo.begin();

    // Set Temboo account credentials
    AppendRowChoreo.setAccountName(TEMBOO_ACCOUNT);
    AppendRowChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
    AppendRowChoreo.setAppKey(TEMBOO_APP_KEY);

    // Set Choreo inputs
    String UsernameValue = "xxxx";
    AppendRowChoreo.addInput("Username", UsernameValue);
    String PasswordValue = "xxxx";
    AppendRowChoreo.addInput("Password", PasswordValue);
    String RowDataValue = (String)analogRead(A0);
    AppendRowChoreo.addInput("RowData", RowDataValue);
    String SpreadsheetTitleValue = "TempSensor";
    AppendRowChoreo.addInput("SpreadsheetTitle", SpreadsheetTitleValue);

    // Identify the Choreo to run
    AppendRowChoreo.setChoreo("/Library/Google/Spreadsheets/AppendRow");
    // Run the Choreo; when results are available, print them to serial
    AppendRowChoreo.run();
    while(AppendRowChoreo.available()) 
    {
      char c = AppendRowChoreo.read();
      Serial.print(c);
    }
    AppendRowChoreo.close();

    digitalWrite(2, HIGH);
    delay(3000);      
    digitalWrite(2, LOW);

      }

  Serial.println("\nWaiting...\n");
  delay(5000); // wait 5 seconds between AppendRow calls
}

这是我要实现的循环

void flash()
{
    digitalWrite(3, HIGH);
    delay(100);
    digitalWrite(3, LOW);
    delay(100);
} 

开始于

TembooChoreo AppendRowChoreo(client);

并结束于

AppendRowChoreo.close();

Answer 1

看一下计时器库 。 该库允许您在某些延迟后运行任务，而无需使用delay（）函数。

该库是使用计时器中断来计划任务的实现。 您可以手动执行相同的操作。

在这里看到的主要思想是，使用delay（）安排任务通常是浪费的，因为它使处理器无法执行任何操作，即“忙于等待”。 相反，嵌入式程序员需要学习如何使用计时器中断来中断主“线程”以运行任务，而不浪费处理器周期。