[英]Assembly x86 program. Counting numbers in an input
您好,我只是在学习汇编,所以我还不太了解。
我必须编写一个程序,用户在其中输入各种字母数字等的某种行。该程序应计算输入中有多少个数字并打印出计数器。
这是我的代码:
.model small
.stack 100h
.data
buffer db 100, ?, 100 dup (0)
count db 0
.code
start:
mov ax, @data
mov ds, ax
mov dx, offset buffer
mov ah, 0Ah
int 21h
mov ah, buffer
xor si, si
xor cx, cx
.loop:
.notdigit:
mov dl, buffer[si]
inc Si
cmp dl, 0
jz .end
cmp dl, '0'
jb .notdigit
cmp dl, '9'
ja .notdigit
inc count
jmp .loop
.end:
; count contains the digit count
mov dl, count
mov ah, 2h
int 21h
我没有收到任何错误,但是当我运行该程序时,它实际上并没有运行。
怎么了 我应该如何改变呢?
buffer db 100, ?, 100 dup (0)
这是DOS函数0Ah使用的输入缓冲区的正确定义, 但是稍后要遍历实际输入字符串时,您需要跳过前2个字节,因为它们不是实际输入文本的一部分!
您可以将xor si, si
更改为mov si, 2
。
cmp dl, 0 jz .end
DOS为您提供的输入以回车符(ASCII 13)终止,因此测试零是没有用的。
下面的代码使用AL
而不是DL
因为生成的汇编代码会短一些。
存在替代解决方案,但这是最接近您的解决方案:
mov si, 2
.loop:
mov al, buffer[si]
inc si
cmp al, 13
je .end
cmp al, '0'
jb .loop ;notdigit
cmp al, '9'
ja .loop ;notdigit
inc count
jmp .loop
.end:
mov dl, count mov ah, 2h int 21h
该DOS函数要求DL
有一个字符 。 您的count变量只是一个数字,很可能是一个非常小的数字!
您可以通过添加48将0到9的小数字轻松转换为它们各自的字符。
mov dl, count
add dl, '0' ;ASCII code for '0' is 48
mov ah, 02h
int 21h
明确将控制流返回给操作系统(在您的情况下为DOS)是程序员的责任。 这是通过以下系统调用完成的:
mov ah, 4Ch
mov al, 0
int 21h
您应该将这三行放在程序集源文件的末尾。
同样, count
确实包含用户输入中的位数,但采用2的补码格式,这不是您所需要的。 例如,如果用户输入中有两位数字,则count
将包含值0000 0010b
,这肯定不是数字2的ASCII代码(它是32h
或0010 0000b
)。 如果您最多允许9位数字出现在用户输入中,则2到ASCII转换的补码很容易完成:
add dl, '0'
该行应在mov dl, count
,在mov ah, 2h
之前。
该代码的重点是演示几种可用于返回表示字符串中数字字符数量的十进制整数的方法之一,因为这是OP中缺少的部分。 事后,通常使用某种转换算法,但是我认为在解析字符串时如何完成转换可能会很有趣。
由于DOS应用程序的许多示例本质上仅是平面内存模型,因此我省去了诸如节(.data,.const,.text)之类的多余内容,并使用RET返回到命令提示符,因为我们并不真正关心返回码。 我很少像COM文件中那样保留空间,这只会使应用程序肿。
使用NASM name.asm -oname.com版本2.11.08组装
使用DOSBOX 0.74测试
WRITE_STR equ 9
READ_STR equ 0xc0a ; Buffered input with initial flush
DOS equ 33
org 100H ; DOS 6.22 COM file
; ----------------------------------------------------------------------------
Begin:
; Every program should have some sort of prompting so operator has an idea
; of what is expected.
mov dx, Prompt
mov ah, WRITE_STR
int DOS
; Not absolutely required, but AH = 0CH & AL = 0AH accepts buffered input
; but assures there aren't any straggling characters as buffer pointed to by
; DX is flushed first.
mov dx, Users_Entry
mov ax, READ_STR
int DOS
; Setup pointer to string, count of characters entered and initial count
; of digit characters in string
mov si, dx ; Point to input buffer
inc si ; Bounce over maximum characters
xor ax, ax
push ax
lodsb ; Read # of characters entered
mov cx, ax ; Move to counter register for loop
; Of the four possible outcomes, each message must be preceded with
; double return & tab.
mov dx, PreAmb
mov ah, WRITE_STR
int DOS
; The reason AX is being used because a packed BCD value is going to be
; created on the fly, but for this to work DAA must be used and it only
; works on the accumulator.
pop ax ; Restore initial digits count
mov dx, Err00 ; By default, assume nothing was entered.
jcxz Finished ; Branch in buffer is empty
.NextChr:
mov bl, [si] ; Read first or next character
inc si ; Bump pointer
cmp bl, '0'
jb .notNum
cmp bl, '9'
ja .notNum
add al, 1
daa ; Bump counter and decimal adjust
.notNum:
loop .NextChr
mov dx, Msg01 ; Assume a single digit character.
cmp al, 1
jz Finished
mov dx, Msg00
or al, al
jz Finished ; No digit characters found
; Now we are going to replace the word "No" with the BCD value in AX
cld
mov di, dx
push ax
mov dx, di ; Needed to ultimately display string
; There is a good change the value is < 10, so initially we are going
; to convert to space.
shr ax, 4 ; Shift tens into low nibble
or al, ' '
cmp al, ' '
jz $ + 4 ; I
or al, 10000b ; Convert ot digit 1 - 9
stosb ; Write to destination string
pop ax
and ax, 1111b ; Mask out high nibble (tens)
or al, '0'
stosb ; Write units digit.
; Now the appropriate final message can be displayed appending modified
; PreAmb to it.
Finished:
call Show ; Display desired result string
mov dx, PreAmb + 1 ; Do one less line-feed
mov di, dx
mov byte [di+2], '$' ; Don't want to do TAB
Show:
mov ah, WRITE_STR
int DOS
ret ; Return to DOS or maybe DEBUG
; NOTE: alignment is for convenience sake so things can be identified a little
; more readily using hex dumps in DEBUG.
align 16
; ----------------------------------------------------------------------------
Prompt: db 27, '[2J', 10 ; VT100 emulation clears screen and sets
; cursor to 0:0
db ' Please enter alphanumeric string (max 48 chars)'
db 10, 10, ' --> $'
PreAmb: db 10, 10, 9, '$'
Err00: db '--> FAILED <-- NULL string$'
Msg00: db 'No digit characters were found$'
Msg01: db 'Only a single digit character found$'
align 8
Users_Entry: db 49 ; NOTE: change prompting text too.
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.