如何设置 docker 容器以在 Nordic nRF5 SDK 上进行开发？

Question

我想设置一个 docker 容器并与我的同事共享，这样我们就不必单独设置开发环境。

Answer 1

请注意，这不包括将容器保存为图像并上传到 DockerHub（搜索该部分）。 还值得注意的是，这组指令将是创建“dockerfile”的良好开端，它将自动运行所有这些命令以按需构建此容器。

    docker pull ubuntu
    docker run --privileged=true -it -e DISPLAY=$DISPLAY -v /tmp/.X11-unix:/tmp/.X11-unix:ro -v /dev/bus/usb:/dev/bus/usb ubuntu

        // As root in the docker container:
    apt-get update
    apt-get install vim vifm ssh sshd iproute2 iputils-ping sshfs build-essential dos2unix git usbutils
    adduser mydevuser
    /etc/init.d/ssh start
    ip a

        // As mydevuser user in the docker container:
    - Download and unzip gcc compilers from ARM (gcc-arm-none-eabi-8-2019-q3-update-linux.tar.bz2)
    - Download and unzip nRF5SDK (nRF5SDK160098a08e2.zip)
    - Download and unzip soft device (s113nrf52701.zip)
    - Download and unzip command line tools (nRF-Command-Line-Tools_10_4_1_Linux-amd64.tar.gz)
        // Configure for our compiler, here is my updated GNU_INSTALL_ROOT
    ~/nRF5SDK/components/toolchain/gcc ..) head Makefile.posix
                GNU_INSTALL_ROOT ?= /home/mydevuser/gcc/gcc-arm-none-eabi-8-2019-q3-update/bin/
        // Now lets compile some examples
    ~/nRF5SDK/external/micro-ecc/nrf52hf_armgcc/armgcc ..) make
    ~/nRF5SDK/examples/dfu/secure_bootloader/pca10100_s113_ble_debug/armgcc ..) make
    ~/nRF5SDK/examples/peripheral/spi/pca10056/blank/armgcc ..) make

        // As root in the docker container:
    mv /home/mydevuser/cli_nrf/mergehex /opt/
    mv /home/mydevuser/cli_nrf/nrfjprog/ /opt/
    ln -s /opt/nrfjprog/nrfjprog /usr/local/bin/nrfjprog
    ln -s /opt/mergehex/mergehex /usr/local/bin/mergehex
    cp -pv /home/mydevuser/cli_nrf/JLink_Linux_V650b_x86_64/libjlinkarm* /lib/x86_64-linux-gnu/

        // As root in the docker container:
        // Load the firmware over USB to the dev board:
    nrfjprog -f NRF52 --program nrf52840_xxaa.hex --chiperase --log