为 IAR 装配调试 ARM Cortex-M 硬故障

Question

以下为 GCC 编写的代码我想知道如何在 IAR 编译器下编译此代码

Default_Handler:
  /* Load the address of the interrupt control register into r3. */
  ldr r3, NVIC_INT_CTRL_CONST
  /* Load the value of the interrupt control register into r2 from the
  address held in r3. */
  ldr r2, [r3, #0]
  /* The interrupt number is in the least significant byte - clear all
  other bits. */
  uxtb r2, r2
Infinite_Loop:
  /* Now sit in an infinite loop - the number of the executing interrupt
  is held in r2. */
  b  Infinite_Loop
  .size  Default_Handler, .-Default_Handler

.align 4
/* The address of the NVIC interrupt control register. */
NVIC_INT_CTRL_CONST: .word 0xe000ed04


/* The prototype shows it is a naked function - in effect this is just an
assembly function. */
static void HardFault_Handler( void ) __attribute__( ( naked ) );

/* The fault handler implementation calls a function called
prvGetRegistersFromStack(). */
static void HardFault_Handler(void)
{
    __asm volatile
    (
        " tst lr, #4                                                \n"
        " ite eq                                                    \n"
        " mrseq r0, msp                                             \n"
        " mrsne r0, psp                                             \n"
        " ldr r1, [r0, #24]                                         \n"
        " ldr r2, handler2_address_const                            \n"
        " bx r2                                                     \n"
        " handler2_address_const: .word prvGetRegistersFromStack    \n"
    );
}

我确信有简单的语法更改使其可以编译

Answer 1

我自己想通了，这里是解决方案：

 __asm volatile
        (
            " tst lr, #4                                                \n"
            " ite eq                                                    \n"
            " mrseq r0, msp                                             \n"
            " mrsne r0, psp                                             \n"
            " ldr r1, [r0, #24]                                         \n"
            " ldr r2, =prvGetRegistersFromStack                         \n"
            " bx r2                                                     \n"
        );