[英]Difference when returning an array of chars or a pointer to char literal
[英]select() call not returning when chars on port
我有一个选择呼叫,它似乎无法检测到串行端口上的字符。 我有什么想念的吗?
如果删除上面块中的read()代码,则select将返回一会儿,直到清空现有的端口缓冲区,然后再检测不到。
我正在向端口传输字符,运行minicom会在端口上显示连续的输入流。
有人可以看到这段代码有什么问题吗?
int main(void)
{
int ret;
char buf[1280];
fd_set m_Inputs; // fd_set for the select call for com input
int m_maxFD; // max FD for select() call.
struct timeval tv;
int fd1;
fd1 = open("/dev/ttyXR6", O_RDWR | O_NOCTTY | O_NONBLOCK);
fcntl(fd1, F_SETFL, 0);
struct termios options;
tcgetattr(fd1, &options); // Get the current options for the port...
// Set the baud rates...
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
// Enable the receiver and set local mode...
options.c_cflag |= (CLOCAL | CREAD | CS8);
options.c_cflag &= ~PARENB; // ignore parity
options.c_cflag &= ~CSTOPB; // 1 stop bit (2 if set)
options.c_cflag &= ~CSIZE; // clear the size bits
options.c_cflag &= ~CRTSCTS; //No hard flow control
options.c_cflag &= ~HUPCL; //Hang Up on last Close
options.c_cflag |= CS8; // reset the size to 8 bits / char
options.c_cc[VMIN]=1;
options.c_cc[VTIME] = 1;
options.c_oflag = 0;
options.c_lflag = 0; //ICANON;
// Set the new options for the port...
tcsetattr(fd1, TCSANOW, &options);
// test to make sure the characters are coming in on the port
for (short i =0; i < 60; i++)
{
ret = read(fd1, buf, 32);
buf[ret] = '\0';
cout << buf;
usleep(500);
}
fd_set rfds; // fd_set for the select call for com input
FD_ZERO(&rfds);
FD_SET(fd1, &rfds);
cout << endl << "FD1 = " << fd1 << endl;
while (1)
{
tv.tv_sec = 0;
tv.tv_usec = 1000;
ret = select(fd1 + 1, &rfds, NULL, NULL, &tv);
if (ret > 0)
{
ret = read(fd1, buf, 127);
buf[ret] = '\0';
cout << buf;
}
usleep(500);
}
return 0;
}
在返回之前,select()修改rfds以指示哪些描述符具有准备读取的数据。
对于您而言,它是在1ms超时后第一次返回并且描述符上没有可用数据时,它将从rfds集中删除您的描述符,以指示没有可用数据。 然后,当您下次在循环中再次调用select()时,rfds是一个空集,因此在此之后,它甚至都不再需要检查描述符了。
每次循环时,都需要先调用FD_SET(fd1,&rfds)才能进行选择。
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.