[英]x86/x64 CPUID in C#
与我的其他问题相关,请帮助我调试“未知模块中发生类型为‘System.AccessViolationException’的未处理异常。附加信息:尝试读取或写入受保护的内存。这通常表明其他内存已损坏。” 逐步执行代码,一切正常,直到实际调用 del() 并在该行中失败。
此代码基于本文的示例和可在 Python 中运行的Python 代码。 我也无法让代码示例按原样工作(同样的例外),但我希望它只是有点过时或什么的。
编辑:如果您关心我们是如何到达这里的,请查看编辑历史记录,这很无趣。
public static class CpuID
{
public static byte[] Invoke(int level)
{
IntPtr codePointer = IntPtr.Zero;
try
{
// compile
byte[] codeBytes;
if (IntPtr.Size == 4)
{
codeBytes = x86CodeBytes;
}
else
{
codeBytes = x64CodeBytes;
}
codePointer = VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)codeBytes.Length),
AllocationType.COMMIT | AllocationType.RESERVE,
MemoryProtection.EXECUTE_READWRITE
);
Marshal.Copy(codeBytes, 0, codePointer, codeBytes.Length);
CpuIDDelegate cpuIdDelg = (CpuIDDelegate)Marshal.GetDelegateForFunctionPointer(codePointer, typeof(CpuIDDelegate));
// invoke
GCHandle handle = default(GCHandle);
var buffer = new byte[16];
try
{
handle = GCHandle.Alloc(buffer, GCHandleType.Pinned);
cpuIdDelg(level, buffer);
}
finally
{
if (handle != default(GCHandle))
{
handle.Free();
}
}
return buffer;
}
finally
{
if (codePointer != IntPtr.Zero)
{
VirtualFree(codePointer, 0, 0x8000);
codePointer = IntPtr.Zero;
}
}
}
[UnmanagedFunctionPointerAttribute(CallingConvention.Cdecl)]
private delegate void CpuIDDelegate(int level, byte[] buffer);
[DllImport("kernel32.dll", SetLastError = true)]
private static extern IntPtr VirtualAlloc(IntPtr lpAddress, UIntPtr dwSize, AllocationType flAllocationType,
MemoryProtection flProtect);
[DllImport("kernel32")]
private static extern bool VirtualFree(IntPtr lpAddress, UInt32 dwSize, UInt32 dwFreeType);
[Flags()]
private enum AllocationType : uint
{
COMMIT = 0x1000,
RESERVE = 0x2000,
RESET = 0x80000,
LARGE_PAGES = 0x20000000,
PHYSICAL = 0x400000,
TOP_DOWN = 0x100000,
WRITE_WATCH = 0x200000
}
[Flags()]
private enum MemoryProtection : uint
{
EXECUTE = 0x10,
EXECUTE_READ = 0x20,
EXECUTE_READWRITE = 0x40,
EXECUTE_WRITECOPY = 0x80,
NOACCESS = 0x01,
READONLY = 0x02,
READWRITE = 0x04,
WRITECOPY = 0x08,
GUARD_Modifierflag = 0x100,
NOCACHE_Modifierflag = 0x200,
WRITECOMBINE_Modifierflag = 0x400
}
// Basic ASM strategy --
// void x86CpuId(int level, byte* buffer)
// {
// eax = level
// cpuid
// buffer[0] = eax
// buffer[4] = ebx
// buffer[8] = ecx
// buffer[12] = edx
// }
private readonly static byte[] x86CodeBytes = {
0x55, // push ebp
0x8B, 0xEC, // mov ebp,esp
0x53, // push ebx
0x57, // push edi
0x8B, 0x45, 0x08, // mov eax, dword ptr [ebp+8] (move level into eax)
0x0F, 0xA2, // cpuid
0x8B, 0x7D, 0x0C, // mov edi, dword ptr [ebp+12] (move address of buffer into edi)
0x89, 0x07, // mov dword ptr [edi+0], eax (write eax, ... to buffer)
0x89, 0x5F, 0x04, // mov dword ptr [edi+4], ebx
0x89, 0x4F, 0x08, // mov dword ptr [edi+8], ecx
0x89, 0x57, 0x0C, // mov dword ptr [edi+12],edx
0x5F, // pop edi
0x5B, // pop ebx
0x8B, 0xE5, // mov esp,ebp
0x5D, // pop ebp
0xc3 // ret
};
private readonly static byte[] x64CodeBytes = {
0x53, // push rbx this gets clobbered by cpuid
// rcx is level
// rdx is buffer.
// Need to save buffer elsewhere, cpuid overwrites rdx
// Put buffer in r8, use r8 to reference buffer later.
// Save rdx (buffer addy) to r8
0x49, 0x89, 0xd0, // mov r8, rdx
// Move ecx (level) to eax to call cpuid, call cpuid
0x89, 0xc8, // mov eax, ecx
0x0F, 0xA2, // cpuid
// Write eax et al to buffer
0x41, 0x89, 0x40, 0x00, // mov dword ptr [r8+0], eax
0x41, 0x89, 0x58, 0x04, // mov dword ptr [r8+4], ebx
0x41, 0x89, 0x48, 0x08, // mov dword ptr [r8+8], ecx
0x41, 0x89, 0x50, 0x0c, // mov dword ptr [r8+12], edx
0x5b, // pop rbx
0xc3 // ret
};
}
请注意,需要以正确的顺序读取 CPUID0:
//a twelve character ASCII string stored in EBX, EDX, ECX - in that order
var cpuid0s = new string(ASCIIEncoding.ASCII.GetChars(
cpuid0.Skip(4).Take(4).Concat(
cpuid0.Skip(12).Take(4)).Concat(
cpuid0.Skip(8).Take(4)).ToArray()));
我很确定你被DEP屏蔽了。 x_CPUIDy_INSNS
字节数组位于标记为数据且不可执行的内存段中。
编辑:
话虽如此,我已经得到了一个可以编译和运行的版本,但我认为没有得到正确的值。 也许这会让你一路走好。
编辑2:
我想我现在有了正确的价值观。 随意验证。
namespace CPUID
{
using System;
using System.Globalization;
using System.Linq;
using System.Reflection;
using System.Runtime.InteropServices;
using System.Text;
internal static class Program
{
[Flags]
private enum AllocationTypes : uint
{
Commit = 0x1000,
Reserve = 0x2000,
Reset = 0x80000,
LargePages = 0x20000000,
Physical = 0x400000,
TopDown = 0x100000,
WriteWatch = 0x200000
}
[Flags]
private enum MemoryProtections : uint
{
Execute = 0x10,
ExecuteRead = 0x20,
ExecuteReadWrite = 0x40,
ExecuteWriteCopy = 0x80,
NoAccess = 0x01,
ReadOnly = 0x02,
ReadWrite = 0x04,
WriteCopy = 0x08,
GuartModifierflag = 0x100,
NoCacheModifierflag = 0x200,
WriteCombineModifierflag = 0x400
}
[Flags]
private enum FreeTypes : uint
{
Decommit = 0x4000,
Release = 0x8000
}
[UnmanagedFunctionPointerAttribute(CallingConvention.Cdecl)]
private unsafe delegate void CPUID0Delegate(byte* buffer);
[UnmanagedFunctionPointerAttribute(CallingConvention.Cdecl)]
private unsafe delegate void CPUID1Delegate(byte* buffer);
private static void Main()
{
Console.WriteLine("CPUID0: {0}", string.Join(", ", CPUID0().Select(x => x.ToString("X2", CultureInfo.InvariantCulture))));
Console.WriteLine("CPUID0: {0}", new string(ASCIIEncoding.ASCII.GetChars(CPUID0())));
Console.WriteLine("CPUID1: {0}", string.Join(", ", CPUID1().Select(x => x.ToString("X2", CultureInfo.InvariantCulture))));
Console.ReadLine();
}
private static unsafe byte[] CPUID0()
{
byte[] buffer = new byte[12];
if (IntPtr.Size == 4)
{
IntPtr p = NativeMethods.VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)x86_CPUID0_INSNS.Length),
AllocationTypes.Commit | AllocationTypes.Reserve,
MemoryProtections.ExecuteReadWrite);
try
{
Marshal.Copy(x86_CPUID0_INSNS, 0, p, x86_CPUID0_INSNS.Length);
CPUID0Delegate del = (CPUID0Delegate)Marshal.GetDelegateForFunctionPointer(p, typeof(CPUID0Delegate));
fixed (byte* newBuffer = &buffer[0])
{
del(newBuffer);
}
}
finally
{
NativeMethods.VirtualFree(p, 0, FreeTypes.Release);
}
}
else if (IntPtr.Size == 8)
{
IntPtr p = NativeMethods.VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)x64_CPUID0_INSNS.Length),
AllocationTypes.Commit | AllocationTypes.Reserve,
MemoryProtections.ExecuteReadWrite);
try
{
Marshal.Copy(x64_CPUID0_INSNS, 0, p, x64_CPUID0_INSNS.Length);
CPUID0Delegate del = (CPUID0Delegate)Marshal.GetDelegateForFunctionPointer(p, typeof(CPUID0Delegate));
fixed (byte* newBuffer = &buffer[0])
{
del(newBuffer);
}
}
finally
{
NativeMethods.VirtualFree(p, 0, FreeTypes.Release);
}
}
return buffer;
}
private static unsafe byte[] CPUID1()
{
byte[] buffer = new byte[12];
if (IntPtr.Size == 4)
{
IntPtr p = NativeMethods.VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)x86_CPUID1_INSNS.Length),
AllocationTypes.Commit | AllocationTypes.Reserve,
MemoryProtections.ExecuteReadWrite);
try
{
Marshal.Copy(x86_CPUID1_INSNS, 0, p, x86_CPUID1_INSNS.Length);
CPUID1Delegate del = (CPUID1Delegate)Marshal.GetDelegateForFunctionPointer(p, typeof(CPUID1Delegate));
fixed (byte* newBuffer = &buffer[0])
{
del(newBuffer);
}
}
finally
{
NativeMethods.VirtualFree(p, 0, FreeTypes.Release);
}
}
else if (IntPtr.Size == 8)
{
IntPtr p = NativeMethods.VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)x64_CPUID1_INSNS.Length),
AllocationTypes.Commit | AllocationTypes.Reserve,
MemoryProtections.ExecuteReadWrite);
try
{
Marshal.Copy(x64_CPUID1_INSNS, 0, p, x64_CPUID1_INSNS.Length);
CPUID1Delegate del = (CPUID1Delegate)Marshal.GetDelegateForFunctionPointer(p, typeof(CPUID1Delegate));
fixed (byte* newBuffer = &buffer[0])
{
del(newBuffer);
}
}
finally
{
NativeMethods.VirtualFree(p, 0, FreeTypes.Release);
}
}
return buffer;
}
private static class NativeMethods
{
[DllImport("kernel32.dll", SetLastError = true)]
internal static extern IntPtr VirtualAlloc(
IntPtr lpAddress,
UIntPtr dwSize,
AllocationTypes flAllocationType,
MemoryProtections flProtect);
[DllImport("kernel32")]
[return: MarshalAs(UnmanagedType.Bool)]
internal static extern bool VirtualFree(
IntPtr lpAddress,
uint dwSize,
FreeTypes flFreeType);
}
#region ASM
private static readonly byte[] x86_CPUID0_INSNS = new byte[]
{
0x53, // push %ebx
0x31, 0xc0, // xor %eax,%eax
0x0f, 0xa2, // cpuid
0x8b, 0x44, 0x24, 0x08, // mov 0x8(%esp),%eax
0x89, 0x18, // mov %ebx,0x0(%eax)
0x89, 0x50, 0x04, // mov %edx,0x4(%eax)
0x89, 0x48, 0x08, // mov %ecx,0x8(%eax)
0x5b, // pop %ebx
0xc3 // ret
};
private static readonly byte[] x86_CPUID1_INSNS = new byte[]
{
0x53, // push %ebx
0x31, 0xc0, // xor %eax,%eax
0x40, // inc %eax
0x0f, 0xa2, // cpuid
0x5b, // pop %ebx
0xc3 // ret
};
private static readonly byte[] x64_CPUID0_INSNS = new byte[]
{
0x49, 0x89, 0xd8, // mov %rbx,%r8
0x49, 0x89, 0xc9, // mov %rcx,%r9
0x48, 0x31, 0xc0, // xor %rax,%rax
0x0f, 0xa2, // cpuid
0x4c, 0x89, 0xc8, // mov %r9,%rax
0x89, 0x18, // mov %ebx,0x0(%rax)
0x89, 0x50, 0x04, // mov %edx,0x4(%rax)
0x89, 0x48, 0x08, // mov %ecx,0x8(%rax)
0x4c, 0x89, 0xc3, // mov %r8,%rbx
0xc3 // retq
};
private static readonly byte[] x64_CPUID1_INSNS = new byte[]
{
0x53, // push %rbx
0x48, 0x31, 0xc0, // xor %rax,%rax
0x48, 0xff, 0xc0, // inc %rax
0x0f, 0xa2, // cpuid
0x5b, // pop %rbx
0xc3 // retq
};
#endregion
}
}
我决定改进你的答案。 它不再需要 unsafe 来编译,它只需要两个汇编块以便能够读出任何和所有 cpuid 块,因为它只是将 eax/ebx/ecx/edx 写入一个 16 字节的字节数组。
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Reflection;
using System.Runtime.InteropServices;
namespace CpuID
{
public class CpuID : IDisposable
{
[UnmanagedFunctionPointerAttribute(CallingConvention.Cdecl)]
public delegate void CpuIDDelegate(int level, byte[] buffer);
[DllImport("kernel32.dll", SetLastError = true)]
private static extern IntPtr VirtualAlloc(
IntPtr lpAddress,
UIntPtr dwSize,
AllocationType flAllocationType,
MemoryProtection flProtect
);
[DllImport("kernel32")]
private static extern bool VirtualFree(
IntPtr lpAddress,
UInt32 dwSize,
UInt32 dwFreeType
);
[Flags()]
public enum AllocationType : uint
{
COMMIT = 0x1000,
RESERVE = 0x2000,
RESET = 0x80000,
LARGE_PAGES = 0x20000000,
PHYSICAL = 0x400000,
TOP_DOWN = 0x100000,
WRITE_WATCH = 0x200000
}
[Flags()]
public enum MemoryProtection : uint
{
EXECUTE = 0x10,
EXECUTE_READ = 0x20,
EXECUTE_READWRITE = 0x40,
EXECUTE_WRITECOPY = 0x80,
NOACCESS = 0x01,
READONLY = 0x02,
READWRITE = 0x04,
WRITECOPY = 0x08,
GUARD_Modifierflag = 0x100,
NOCACHE_Modifierflag = 0x200,
WRITECOMBINE_Modifierflag = 0x400
}
private CpuIDDelegate cpuIdDelg;
private IntPtr codePointer;
// void x86CpuId(int level, byte* buffer)
// {
// eax = level
// cpuid
// buffer[0] = eax
// buffer[4] = ebx
// buffer[8] = ecx
// buffer[12] = edx
// }
private byte[] x86CodeBytes =
{
0x55, // push ebp
0x8B, 0xEC, // mov ebp,esp
0x53, // push ebx
0x57, // push edi
0x8B, 0x45, 0x08, // mov eax, dword ptr [ebp+8] (move level into eax)
0x0F, 0xA2, // cpuid
0x8B, 0x7D, 0x0C, // mov edi, dword ptr [ebp+12] (move address of buffer into edi)
0x89, 0x07, // mov dword ptr [edi+0], eax (write eax, ... to buffer)
0x89, 0x5F, 0x04, // mov dword ptr [edi+4], ebx
0x89, 0x4F, 0x08, // mov dword ptr [edi+8], ecx
0x89, 0x57, 0x0C, // mov dword ptr [edi+12],edx
0x5F, // pop edi
0x5B, // pop ebx
0x8B, 0xE5, // mov esp,ebp
0x5D, // pop ebp
0xc3 // ret
};
private byte[] x64CodeBytes =
{
0x53, // push rbx this gets clobbered by cpuid
// rcx is level
// rdx is buffer.
// Need to save buffer elsewhere, cpuid overwrites rdx
// Put buffer in r8, use r8 to reference buffer later.
// Save rdx (buffer addy) to r8
0x49, 0x89, 0xd0, // mov r8, rdx
// Move ecx (level) to eax to call cpuid, call cpuid
0x89, 0xc8, // mov eax, ecx
0x0F, 0xA2, // cpuid
// Write eax et al to buffer
0x41, 0x89, 0x40, 0x00, // mov dword ptr [r8+0], eax
0x41, 0x89, 0x58, 0x04, // mov dword ptr [r8+4], ebx
0x41, 0x89, 0x48, 0x08, // mov dword ptr [r8+8], ecx
0x41, 0x89, 0x50, 0x0c, // mov dword ptr [r8+12], edx
0x5b, // pop rbx
0xc3 // ret
};
public CpuID()
{
Compile();
}
~CpuID()
{
Dispose(false);
}
private void Compile()
{
byte[] codeBytes;
if (IntPtr.Size == 4)
{
codeBytes = x86CodeBytes;
}
else
{
codeBytes = x64CodeBytes;
}
this.codePointer = VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)codeBytes.Length),
AllocationType.COMMIT | AllocationType.RESERVE,
MemoryProtection.EXECUTE_READWRITE
);
Marshal.Copy(codeBytes, 0, this.codePointer, codeBytes.Length);
this.cpuIdDelg = (CpuIDDelegate)Marshal.GetDelegateForFunctionPointer(this.codePointer, typeof(CpuIDDelegate));
}
public void Invoke(int level, byte[] buffer)
{
GCHandle handle = default(GCHandle);
if (buffer.Length < 16)
{
throw new ArgumentException("buffer must be at least 16 bytes long");
}
try
{
handle = GCHandle.Alloc(buffer, GCHandleType.Pinned);
this.cpuIdDelg(level, buffer);
}
finally
{
if (handle != default(GCHandle))
{
handle.Free();
}
}
}
public void Dispose()
{
Dispose(true);
}
public void Dispose(bool disposing)
{
if (this.codePointer != IntPtr.Zero)
{
VirtualFree(this.codePointer, 0, 0x8000);
this.codePointer = IntPtr.Zero;
}
}
}
}
我把@antiduh 的代码重构为静态方法,所以没有对象生命周期来管理。 这较慢,因为 ASM 代码不会在调用 Invoke() 之间重用,但为了简单而权衡速度对我的用例来说是有意义的。 这个新版本可以在我的机器上在 15 毫秒内调用 CPUID 1000 次。
感谢精彩的代码家伙!
public static class CpuID {
public static byte[] Invoke(int level) {
IntPtr codePointer = IntPtr.Zero;
try {
// compile
byte[] codeBytes;
if (IntPtr.Size == 4) {
codeBytes = x86CodeBytes;
} else {
codeBytes = x64CodeBytes;
}
codePointer = VirtualAlloc(
IntPtr.Zero,
new UIntPtr((uint)codeBytes.Length),
AllocationType.COMMIT | AllocationType.RESERVE,
MemoryProtection.EXECUTE_READWRITE
);
Marshal.Copy(codeBytes, 0, codePointer, codeBytes.Length);
CpuIDDelegate cpuIdDelg = (CpuIDDelegate)Marshal.GetDelegateForFunctionPointer(codePointer, typeof(CpuIDDelegate));
// invoke
GCHandle handle = default(GCHandle);
var buffer = new byte[16];
try {
handle = GCHandle.Alloc(buffer, GCHandleType.Pinned);
cpuIdDelg(level, buffer);
} finally {
if (handle != default(GCHandle)) {
handle.Free();
}
}
return buffer;
} finally {
if (codePointer != IntPtr.Zero) {
VirtualFree(codePointer, 0, 0x8000);
codePointer = IntPtr.Zero;
}
}
}
[UnmanagedFunctionPointerAttribute(CallingConvention.Cdecl)]
private delegate void CpuIDDelegate(int level, byte[] buffer);
[DllImport("kernel32.dll", SetLastError = true)]
private static extern IntPtr VirtualAlloc(IntPtr lpAddress, UIntPtr dwSize, AllocationType flAllocationType,
MemoryProtection flProtect);
[DllImport("kernel32")]
private static extern bool VirtualFree(IntPtr lpAddress, UInt32 dwSize, UInt32 dwFreeType);
[Flags()]
private enum AllocationType : uint {
COMMIT = 0x1000,
RESERVE = 0x2000,
RESET = 0x80000,
LARGE_PAGES = 0x20000000,
PHYSICAL = 0x400000,
TOP_DOWN = 0x100000,
WRITE_WATCH = 0x200000
}
[Flags()]
private enum MemoryProtection : uint {
EXECUTE = 0x10,
EXECUTE_READ = 0x20,
EXECUTE_READWRITE = 0x40,
EXECUTE_WRITECOPY = 0x80,
NOACCESS = 0x01,
READONLY = 0x02,
READWRITE = 0x04,
WRITECOPY = 0x08,
GUARD_Modifierflag = 0x100,
NOCACHE_Modifierflag = 0x200,
WRITECOMBINE_Modifierflag = 0x400
}
// Basic ASM strategy --
// void x86CpuId(int level, byte* buffer)
// {
// eax = level
// cpuid
// buffer[0] = eax
// buffer[4] = ebx
// buffer[8] = ecx
// buffer[12] = edx
// }
private readonly static byte[] x86CodeBytes = {
0x55, // push ebp
0x8B, 0xEC, // mov ebp,esp
0x53, // push ebx
0x57, // push edi
0x8B, 0x45, 0x08, // mov eax, dword ptr [ebp+8] (move level into eax)
0x0F, 0xA2, // cpuid
0x8B, 0x7D, 0x0C, // mov edi, dword ptr [ebp+12] (move address of buffer into edi)
0x89, 0x07, // mov dword ptr [edi+0], eax (write eax, ... to buffer)
0x89, 0x5F, 0x04, // mov dword ptr [edi+4], ebx
0x89, 0x4F, 0x08, // mov dword ptr [edi+8], ecx
0x89, 0x57, 0x0C, // mov dword ptr [edi+12],edx
0x5F, // pop edi
0x5B, // pop ebx
0x8B, 0xE5, // mov esp,ebp
0x5D, // pop ebp
0xc3 // ret
};
private readonly static byte[] x64CodeBytes = {
0x53, // push rbx this gets clobbered by cpuid
// rcx is level
// rdx is buffer.
// Need to save buffer elsewhere, cpuid overwrites rdx
// Put buffer in r8, use r8 to reference buffer later.
// Save rdx (buffer addy) to r8
0x49, 0x89, 0xd0, // mov r8, rdx
// Move ecx (level) to eax to call cpuid, call cpuid
0x89, 0xc8, // mov eax, ecx
0x0F, 0xA2, // cpuid
// Write eax et al to buffer
0x41, 0x89, 0x40, 0x00, // mov dword ptr [r8+0], eax
0x41, 0x89, 0x58, 0x04, // mov dword ptr [r8+4], ebx
0x41, 0x89, 0x48, 0x08, // mov dword ptr [r8+8], ecx
0x41, 0x89, 0x50, 0x0c, // mov dword ptr [r8+12], edx
0x5b, // pop rbx
0xc3 // ret
};
}
我知道这个线程很旧,但我非常喜欢这个线程。 编码后,我发现在“EAX=7,ECX=0”时获取数据存在问题,因此,我在 x64CodeBytes 中添加了“mov ecx, 0”。
private readonly static byte[] x64CodeBytes = {
0x53, // push rbx this gets clobbered by cpuid
// rcx is level
// rdx is buffer.
// Need to save buffer elsewhere, cpuid overwrites rdx
// Put buffer in r8, use r8 to reference buffer later.
// Save rdx (buffer addy) to r8
0x49, 0x89, 0xd0, // mov r8, rdx
// Move ecx (level) to eax to call cpuid, call cpuid
0x89, 0xc8, // mov eax, ecx
0xB9, 0x00, 0x00, 0x00, 0x00, // mov ecx, 0
0x0F, 0xA2, // cpuid
// Write eax et al to buffer
0x41, 0x89, 0x40, 0x00, // mov dword ptr [r8+0], eax
0x41, 0x89, 0x58, 0x04, // mov dword ptr [r8+4], ebx
0x41, 0x89, 0x48, 0x08, // mov dword ptr [r8+8], ecx
0x41, 0x89, 0x50, 0x0c, // mov dword ptr [r8+12], edx
0x5b, // pop rbx
0xc3 // ret
};
我可以建议以下页面: http : //community.devpinoy.org/blogs/cvega/archive/2006/04/07/2658.aspx
本页将向您展示 CPUID 的汇编源代码、如何将其编译为 DLL 以及如何从 C# 调用它。
另外如果你需要其他硬件识别程序,我可以推荐这个页面: http : //www.codeproject.com/KB/system/GetHardwareInformation.aspx
此页面显示如何获取主板信息、硬盘信息、cpu 信息、显卡信息等信息。
此外,要获得 CPUID4,还需要一个参数。 以下是获取 CPUID0、CPUID1、CPUID2、CPUID4 的方法。
byte[] cpuid0 = Invoke(0, 0);
byte[] cpuid1 = Invoke(1, 0);
byte[] cpuid2 = Invoke(2, 0);
List<byte[]> cpuid4L = new List<byte[]>();
for (int i = 0; true; i++)
{
byte[] cpuid4 = Invoke(4, (uint)i);
if ( (cpuid4[0] & 0x0F) == 0)
break;
cpuid4L.Add(cpuid4);
}
private static byte[] Invoke(uint functionNum, uint ecx)
{
IntPtr codePointer = IntPtr.Zero;
try
{
// Select a code
byte[] codeBytes;
if (IntPtr.Size == 4)
codeBytes = x86CodeBytes;
else
codeBytes = x64CodeBytes;
codePointer = NativeMethods.VirtualAlloc(IntPtr.Zero, new UIntPtr((uint)codeBytes.Length), MEM_COMMIT | MEM_RESERVE, PAGE_EXECUTE_READWRITE);
Marshal.Copy(codeBytes, 0, codePointer, codeBytes.Length);
CpuIdDelegate cpuIdDelg = (CpuIdDelegate)Marshal.GetDelegateForFunctionPointer(codePointer, typeof(CpuIdDelegate));
// Invoke the code
GCHandle handle = default(GCHandle);
var buffer = new byte[16];
try
{
handle = GCHandle.Alloc(buffer, GCHandleType.Pinned);
cpuIdDelg(ecx, functionNum, buffer); // Run the assembly code.
}
finally
{
if (handle != default(GCHandle))
{
handle.Free();
}
}
return buffer;
}
finally
{
if (codePointer != IntPtr.Zero)
{
NativeMethods.VirtualFree(codePointer, (UIntPtr) 0, MEM_RELEASE);
codePointer = IntPtr.Zero;
}
}
}
private readonly static byte[] x86CodeBytes = {
0x55,
0x8B, 0xEC,
0x53,
0x57,
0x8B, 0x4D, 0x08,
0x8B, 0x45, 0x0C,
0x0F, 0xA2,
0x8B, 0x7D, 0x10,
0x89, 0x07,
0x89, 0x5F, 0x04,
0x89, 0x4F, 0x08,
0x89, 0x57, 0x0C,
0x5F,
0x5B,
0x8B, 0xE5,
0x5D,
0xc3
};
private readonly static byte[] x64CodeBytes = {
0x53,
0x89, 0xD0,
0x0F, 0xA2,
0x41, 0x89, 0x40, 0x00,
0x41, 0x89, 0x58, 0x04,
0x41, 0x89, 0x48, 0x08,
0x41, 0x89, 0x50, 0x0c,
0x5b,
0xc3
};
使用 .NET 5,现在有一个内置的内部函数: https : //docs.microsoft.com/en-us/dotnet/api/system.runtime.intrinsics.x86.x86base.cpuid?view=net- 5.0
var (eax, ebx, ecx, edx) = X86Base.CpuId(functionId, subFunctionId);
感谢@antiduh 的解决方案。 为了更好的可用性,我会稍微更改 Invoke 签名,如下所示,因此您无需将 get 结果分配为一组寄存器
// This is a modification to https://stackoverflow.com/a/7964376/725903
[UnmanagedFunctionPointerAttribute(CallingConvention.Cdecl)]
private delegate void CpuIDDelegate(int level, IntPtr ptr);
[StructLayout(LayoutKind.Sequential, Size = 16)]
public struct CpuIdResult
{
public int Eax;
public int Ebx;
public int Ecx;
public int Edx;
}
public CpuIdResult Invoke(int level)
{
CpuIdResult result;
IntPtr buffer = Marshal.AllocHGlobal(16);
try
{
this.cpuIdDelg(level, buffer);
result = (CpuIdResult)Marshal.PtrToStructure(buffer, typeof(CpuIdResult));
}
finally
{
Marshal.FreeHGlobal(buffer);
}
return result;
}
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.