[英]baudrate serial windows port
为了探测 windows 串口我写了这个程序。 我将串口波特率设置为 115200 bps。 当我运行这个程序时,经过的时间是 1250 毫秒,所以波特率只能达到 102400 bps。 我还用类似的程序检查接收波特率,波特率是相同的。
这是程序:
char* message =
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx";
int numBytes = 144;
c0 = clock()
for (;;)
{
sendSerial(&hCom, message, numBytes );
tx +=numBytes;
//14400 bytes * 8 = 115200 bps
if (tx >= 14400)
{
c1 = clock();
runtime_diff_ms = (c1 - c0) * 1000. / CLOCKS_PER_SEC;
printf("Tx frames %d Time ms %f", tx, runtime_diff_ms);
system ("pause");
return -1;
}
}
bool sendSerial(HANDLE *hCom, char *WriteBuffer, DWORD dwBytesToWrite)
{
DWORD dwBytesWritten = 0;
BOOL bErrorFlag = FALSE;
bErrorFlag = WriteFile(
*hCom, // open file handle
WriteBuffer, // start of data to write
dwBytesToWrite, // number of bytes to write
&dwBytesWritten, // number of bytes that were written
NULL);
...
}
这些是我的串口规格:
DCB dcbSerialParams;
COMMTIMEOUTS timeouts;
dcbSerialParams.BaudRate=CBR_115200;
dcbSerialParams.ByteSize=8;
dcbSerialParams.StopBits=ONESTOPBIT;
dcbSerialParams.Parity=NOPARITY;
timeouts.ReadIntervalTimeout=MAXDWORD;
timeouts.ReadTotalTimeoutMultiplier=MAXDWORD;
timeouts.ReadTotalTimeoutConstant=5000; // 5sec
timeouts.WriteTotalTimeoutMultiplier=10;
timeouts.WriteTotalTimeoutConstant=100;
有谁知道如何解决这个问题以达到 115200 bps?
每个字符有 10 位 - 8 位用于数据加上一个开始和停止位。
如果您计算在 115200 bps 下每个字符 10 位的 14400 个字符应该花费多长时间,那么您将得到 1250 毫秒:
(14400 characters * 10 bits/character) / (115200 bits/second) = 1.250 seconds
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.