从JMS MessageListener发出回滚信号

Question

我一直在使用JMS和ActiveMQ。 一切都在创造奇迹。 我不是用春天，也不是我。

接口javax.jms.MessageListener只有一个方法onMessage 。 在实现中，有可能抛出异常。 如果事实上抛出异常，那么我说消息没有正确处理，需要重新尝试。 所以，我需要ActiveMQ等待一段时间，然后重试。 即我需要抛出异常来回滚JMS事务。

我怎样才能完成这样的行为？

也许ActiveMQ中有一些我无法找到的配置。

或者......也许可以取消将MessageListener注册到消费者并自己使用消息，如下所示：

while (true) {
    // ... some administrative stuff like ...
    session = connection.createSesstion(true, SESSION_TRANSACTED)
    try {
        Message m = receiver.receive(queue, 1000L);
        theMessageListener.onMessage(m);
        session.commit();
    } catch (Exception e) {
        session.rollback();
        Thread.sleep(someTimeDefinedSomewhereElse);
    }
    // ... some more administrative stuff
}

在几个线程中，而不是注册监听器。

或者......我可以以某种方式装饰/ AOP /字节操作MessageListener来自己做。

你会采取什么途径？为什么？

注意 ：我没有完全控制MessageListener的代码。

编辑概念证明的测试：

@Test
@Ignore("Interactive test, just a proof of concept")
public void transaccionConListener() throws Exception {
    final AtomicInteger atomicInteger = new AtomicInteger(0);

    BrokerService brokerService = new BrokerService();

    String bindAddress = "vm://localhost";
    brokerService.addConnector(bindAddress);
    brokerService.setPersistenceAdapter(new MemoryPersistenceAdapter());
    brokerService.setUseJmx(false);
    brokerService.start();

    ActiveMQConnectionFactory activeMQConnectionFactory = new ActiveMQConnectionFactory(bindAddress);
    RedeliveryPolicy redeliveryPolicy = new RedeliveryPolicy();
    redeliveryPolicy.setInitialRedeliveryDelay(500);
    redeliveryPolicy.setBackOffMultiplier(2);
    redeliveryPolicy.setUseExponentialBackOff(true);
    redeliveryPolicy.setMaximumRedeliveries(2);

    activeMQConnectionFactory.setRedeliveryPolicy(redeliveryPolicy);
    activeMQConnectionFactory.setUseRetroactiveConsumer(true);
    activeMQConnectionFactory.setClientIDPrefix("ID");
    PooledConnectionFactory pooledConnectionFactory = new PooledConnectionFactory(activeMQConnectionFactory);

    pooledConnectionFactory.start();

    Connection connection = pooledConnectionFactory.createConnection();
    Session session = connection.createSession(false, Session.DUPS_OK_ACKNOWLEDGE);
    Queue helloQueue = session.createQueue("Hello");
    MessageConsumer consumer = session.createConsumer(helloQueue);
    consumer.setMessageListener(new MessageListener() {

        @Override
        public void onMessage(Message message) {
            TextMessage textMessage = (TextMessage) message;
            try {
                switch (atomicInteger.getAndIncrement()) {
                    case 0:
                        System.out.println("OK, first message received " + textMessage.getText());
                        message.acknowledge();
                        break;
                    case 1:
                        System.out.println("NOPE, second must be retried " + textMessage.getText());
                        throw new RuntimeException("I failed, aaaaah");
                    case 2:
                        System.out.println("OK, second message received " + textMessage.getText());
                        message.acknowledge();
                }
            } catch (JMSException e) {
                e.printStackTrace(System.out);
            }
        }
    });
    connection.start();

    {
        // A client sends two messages...
        Connection connection1 = pooledConnectionFactory.createConnection();
        Session session1 = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection1.start();

        MessageProducer producer = session1.createProducer(helloQueue);
        producer.send(session1.createTextMessage("Hello World 1"));
        producer.send(session1.createTextMessage("Hello World 2"));

        producer.close();
        session1.close();
        connection1.stop();
        connection1.close();
    }
    JOptionPane.showInputDialog("I will wait, you watch the log...");

    consumer.close();
    session.close();
    connection.stop();
    connection.close();
    pooledConnectionFactory.stop();

    brokerService.stop();

    assertEquals(3, atomicInteger.get());
}

Answer 1

如果要将SESSION_TRANSACTED用作确认模式，则需要在Connection / ConnectionFactory上设置RedeliveryPolicy 。 ActiveMQ网站上的这个页面还包含一些您可能需要做的好信息。

由于您没有使用Spring，因此您可以使用类似于以下代码的内容设置RedeliveryPolicy（取自以上链接之一）：

RedeliveryPolicy policy = connection.getRedeliveryPolicy();
policy.setInitialRedeliveryDelay(500);
policy.setBackOffMultiplier(2);
policy.setUseExponentialBackOff(true);
policy.setMaximumRedeliveries(2);

---

编辑将您的代码段添加到答案中，以下显示了它如何与事务一起使用。 使用注释掉的Session.rollback（）方法尝试此代码，您将看到使用SESION_TRANSACTED和Session.commit / rollback按预期工作：

@Test
public void test() throws Exception {
    final AtomicInteger atomicInteger = new AtomicInteger(0);

    BrokerService brokerService = new BrokerService();

    String bindAddress = "vm://localhost";
    brokerService.addConnector(bindAddress);
    brokerService.setPersistenceAdapter(new MemoryPersistenceAdapter());
    brokerService.setUseJmx(false);
    brokerService.start();

    ActiveMQConnectionFactory activeMQConnectionFactory = new ActiveMQConnectionFactory(bindAddress);
    RedeliveryPolicy redeliveryPolicy = new RedeliveryPolicy();
    redeliveryPolicy.setInitialRedeliveryDelay(500);
    redeliveryPolicy.setBackOffMultiplier(2);
    redeliveryPolicy.setUseExponentialBackOff(true);
    redeliveryPolicy.setMaximumRedeliveries(2);

    activeMQConnectionFactory.setRedeliveryPolicy(redeliveryPolicy);
    activeMQConnectionFactory.setUseRetroactiveConsumer(true);
    activeMQConnectionFactory.setClientIDPrefix("ID");

    PooledConnectionFactory pooledConnectionFactory = new PooledConnectionFactory(activeMQConnectionFactory);

    pooledConnectionFactory.start();

    Connection connection = pooledConnectionFactory.createConnection();
    final Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
    Queue helloQueue = session.createQueue("Hello");
    MessageConsumer consumer = session.createConsumer(helloQueue);
    consumer.setMessageListener(new MessageListener() {

        public void onMessage(Message message) {
            TextMessage textMessage = (TextMessage) message;
            try {
                switch (atomicInteger.getAndIncrement()) {
                    case 0:
                        System.out.println("OK, first message received " + textMessage.getText());
                        session.commit();
                        break;
                    case 1:
                        System.out.println("NOPE, second must be retried " + textMessage.getText());
                        session.rollback();
                        throw new RuntimeException("I failed, aaaaah");
                    case 2:
                        System.out.println("OK, second message received " + textMessage.getText());
                        session.commit();
                }
            } catch (JMSException e) {
                e.printStackTrace(System.out);
            }
        }
    });
    connection.start();

    {
        // A client sends two messages...
        Connection connection1 = pooledConnectionFactory.createConnection();
        Session session1 = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection1.start();

        MessageProducer producer = session1.createProducer(helloQueue);
        producer.send(session1.createTextMessage("Hello World 1"));
        producer.send(session1.createTextMessage("Hello World 2"));

        producer.close();
        session1.close();
        connection1.stop();
        connection1.close();
    }
    JOptionPane.showInputDialog("I will wait, you watch the log...");

    consumer.close();
    session.close();
    connection.stop();
    connection.close();
    pooledConnectionFactory.stop();

    assertEquals(3, atomicInteger.get());
}

}

Answer 2

您需要将确认模式设置为Session.CLIENT_ACKNOWLEDGE，客户端通过调用消息的确认方法来确认消耗的消息。

QueueSession session = connection.createQueueSession(false, Session.CLIENT_ACKNOWLEDGE);

然后，在处理消息之后需要调用Message.acknowledge（）方法以删除该消息。

Message message = ...;
// Processing message

message.acknowledge();

Answer 3

如果您的会话是事务处理，那么无论如何都会忽略“acknowledgeMode”。因此，只需让会话处理并使用session.rollback和session.commit来提交或回滚您的事务。