[英]Attempt to create a named pipe failing with ERROR_IS_SUBSTED
我从msdn博客中获取了这段代码:
#include <windows.h>
#include <stdio.h>
#include <conio.h>
#include <tchar.h>
#define BUFSIZE 512
int _tmain(int argc, TCHAR *argv[])
{
HANDLE hPipe;
LPTSTR lpvMessage=TEXT("Default message from client.");
TCHAR chBuf[BUFSIZE];
BOOL fSuccess = FALSE;
DWORD cbRead, cbToWrite, cbWritten, dwMode;
LPTSTR lpszPipename = TEXT("H:\\Users\\uname\\Documents\\fff.txt");
if( argc > 1 )
lpvMessage = argv[1];
// Try to open a named pipe; wait for it, if necessary.
while (1)
{
hPipe = CreateFile(
lpszPipename, // pipe name
GENERIC_READ | // read and write access
GENERIC_WRITE,
0, // no sharing
NULL, // default security attributes
OPEN_ALWAYS, // opens existing pipe
0, // default attributes
NULL); // no template file
// Break if the pipe handle is valid.
if (hPipe != INVALID_HANDLE_VALUE)
break;
// Exit if an error other than ERROR_PIPE_BUSY occurs.
if (GetLastError() != ERROR_PIPE_BUSY)
{
_tprintf( TEXT("Could not open pipe. GLE=%d\n"), GetLastError() );
return -1;
}
// All pipe instances are busy, so wait for 20 seconds.
if ( ! WaitNamedPipe(lpszPipename, 20000))
{
printf("Could not open pipe: 20 second wait timed out.");
return -1;
}
}
// The pipe connected; change to message-read mode.
dwMode = PIPE_READMODE_MESSAGE;
fSuccess = SetNamedPipeHandleState(
hPipe, // pipe handle
&dwMode, // new pipe mode
NULL, // don't set maximum bytes
NULL); // don't set maximum time
if ( ! fSuccess)
{
_tprintf( TEXT("SetNamedPipeHandleState failed. GLE=%d\n"), GetLastError() );
return -1;
}
// Send a message to the pipe server.
cbToWrite = (lstrlen(lpvMessage)+1)*sizeof(TCHAR);
_tprintf( TEXT("Sending %d byte message: \"%s\"\n"), cbToWrite, lpvMessage);
fSuccess = WriteFile(
hPipe, // pipe handle
lpvMessage, // message
cbToWrite, // message length
&cbWritten, // bytes written
NULL); // not overlapped
if ( ! fSuccess)
{
_tprintf( TEXT("WriteFile to pipe failed. GLE=%d\n"), GetLastError() );
return -1;
}
printf("\nMessage sent to server, receiving reply as follows:\n");
do
{
// Read from the pipe.
fSuccess = ReadFile(
hPipe, // pipe handle
chBuf, // buffer to receive reply
BUFSIZE*sizeof(TCHAR), // size of buffer
&cbRead, // number of bytes read
NULL); // not overlapped
if ( ! fSuccess && GetLastError() != ERROR_MORE_DATA )
break;
_tprintf( TEXT("\"%s\"\n"), chBuf );
} while ( ! fSuccess); // repeat loop if ERROR_MORE_DATA
if ( ! fSuccess)
{
_tprintf( TEXT("ReadFile from pipe failed. GLE=%d\n"), GetLastError() );
return -1;
}
printf("\n<End of message, press ENTER to terminate connection and exit>");
_getch();
CloseHandle(hPipe);
return 0;
}
我浏览了代码中使用的大多数函数的文档。我没有找到任何可能导致麻烦的操作。 显然在循环中打开文件是不应该存在的。 但是当我编译代码(VS 2010 Ultimate)并运行它时,它失败了
ERROR_IS_SUBSTED错误。 GetLastError返回此错误的位置如下:
while (1)
{
hPipe = CreateFile(
lpszPipename, // pipe name
GENERIC_READ | // read and write access
GENERIC_WRITE,
0, // no sharing
NULL, // default security attributes
OPEN_ALWAYS, // opens existing pipe
0, // default attributes
NULL); // no template file
我还是Windows编程的新手,这些错误代码让我感到困惑。 此错误的msdn文档说明An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
那么社区的人也可以
1.Clarify什么是ERROR_IS_SUBSTD? msdn给出的描述对我来说太神秘了。 :(
2.为什么我收到这个错误?
3.(有点偏离主题)我缺少strace实用程序,它在我的编程生涯中一直是我的追踪/纠正这些错误的救星。 我们在Windows中有类似的东西吗?
除非您的H驱动器是网络共享,否则错误消息看起来像随机废话。 但即使错误消息看起来像随意的废话,你的pipename也会这样做。
要创建命名管道,请在此处参阅MSDN: CreateNamedPipe
pipename必须是这样的
"\\\\.\\pipe\\pipename"
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.