構建二維MySQL查詢的最有效方法是什么？

Question

我有一個MySQL數據庫，包含以下表格和字段：

• 學生卡）
• 班級號）
• 成績（id，student_id，class_id，年級）

學生和班級表在id（主鍵）上編制索引。 成績表在id（主鍵）和student_id，class_id和grade上編制索引。

我需要構建一個查詢，給定一個類ID，給出所有其他類的列表以及在其他類中獲得更多分數的學生數。

基本上，給出成績表中的以下數據：

student_id | class_id | grade
--------------------------------------
1          | 1        | 87
1          | 2        | 91
1          | 3        | 75
2          | 1        | 68
2          | 2        | 95
2          | 3        | 84
3          | 1        | 76
3          | 2        | 88
3          | 3        | 71

使用類ID 1查詢應該產生：

class_id | total
-------------------
2        | 3
3        | 1

理想情況下，我希望在幾秒鍾內執行此操作，因為我希望它能夠成為Web界面的一部分。

我的問題是，在我的數據庫中，我有超過1300個班級和160,000名學生。 我的成績表有近1500萬行，因此查詢需要很長時間才能執行。

這是我到目前為止所嘗試的以及每個查詢所花費的時間：

-- I manually stopped execution after 2 hours
SELECT    c.id, COUNT(*) AS total
FROM      classes c
              INNER JOIN grades a ON a.class_id = c.id
              INNER JOIN grades b ON b.grade < a.grade AND
                  a.student_id = b.student_id AND
                  b.class_id = 1
WHERE     c.id != 1 AND
GROUP BY  c.id

-- I manually stopped execution after 20 minutes
SELECT    c.id,
          (
              SELECT    COUNT(*) 
              FROM      grades g 
              WHERE     g.class_id = c.id AND g.grade > (
                            SELECT   grade 
                            FROM     grades 
                            WHERE    student_id = g.student_id AND 
                                     class_id = 1
                        )
          ) AS total
FROM      classes c
WHERE     c.id != 1;

-- 1 min 12 sec
CREATE TEMPORARY TABLE temp_blah (student_id INT(11) PRIMARY KEY, grade INT);
INSERT INTO temp_blah SELECT student_id, grade FROM grades WHERE class_id = 1;
SELECT    o.id,
          ( 
              SELECT    COUNT(*)
              FROM      grades g
                            INNER JOIN temp_blah t ON g.student_id = t.student_id
              WHERE     g.class_id = c.id AND t.grade < g.grade
          ) AS total
FROM      classes c
WHERE     c.id != 1;

-- Same thing but with joins instead of a subquery - 1 min 54 sec
SELECT    c.id,
          COUNT(*) AS total
FROM      classes c
              INNER JOIN grades g ON c.id = p.class_id
              INNER JOIN temp_blah t ON g.student_id = t.student_id
WHERE     c.id != 1
GROUP BY  c.id;

我還考慮創建一個2D表，學生作為行和類作為列，但我可以看到兩個問題：

• MySQL實現了這種方法可能超過的最大列數（4096）和最大行大小（以字節為單位）
• 我想不出一個查詢該結構以獲得我需要的結果的好方法

我還考慮將這些計算作為后台作業並將結果存儲在某處，但為了使信息保持最新（必須），每次創建或更新學生，班級或成績記錄時都需要重新計算。

有誰知道構建此查詢的更有效方法？

編輯：創建表語句：

CREATE TABLE `classes` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=1331 DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci$$

CREATE TABLE `students` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=160803 DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci$$

CREATE TABLE `grades` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `student_id` int(11) DEFAULT NULL,
  `class_id` int(11) DEFAULT NULL,
  `grade` int(11) DEFAULT NULL,
  PRIMARY KEY (`id`),
  KEY `index_grades_on_student_id` (`student_id`),
  KEY `index_grades_on_class_id` (`class_id`),
  KEY `index_grades_on_grade` (`grade`)
) ENGINE=InnoDB AUTO_INCREMENT=15507698 DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci$$

關於最有效查詢的解釋輸出（1分12秒一）：

id | select_type        | table | type   | possible_keys                                                             | key                      | key_len | ref               | rows   | extra 
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1  | PRIMARY            | c     | range  | PRIMARY                                                                   | PRIMARY                  | 4       |                   | 683    | Using where; Using index
2  | DEPENDENT SUBQUERY | g     | ref    | index_grades_on_student_id,index_grades_on_class_id,index_grades_on_grade | index_grades_on_class_id | 5       | mydb.c.id         | 830393 | Using where
2  | DEPENDENT SUBQUERY | t     | eq_ref | PRIMARY                                                                   | PRIMARY                  | 4       | mydb.g.student_id | 1      | Using where

另一個編輯 - 解釋sgeddes的輸出建議：

+----+-------------+------------+--------+---------------+------+---------+------+----------+----------------------------------------------+
| id | select_type | table      | type   | possible_keys | key  | key_len | ref  | rows     | Extra                                        |
+----+-------------+------------+--------+---------------+------+---------+------+----------+----------------------------------------------+
|  1 | PRIMARY     | <derived2> | ALL    | NULL          | NULL | NULL    | NULL | 14953992 | Using where; Using temporary; Using filesort |
|  2 | DERIVED     | <derived3> | system | NULL          | NULL | NULL    | NULL |        1 | Using filesort                               |
|  2 | DERIVED     | G          | ALL    | NULL          | NULL | NULL    | NULL | 15115388 |                                              |
|  3 | DERIVED     | NULL       | NULL   | NULL          | NULL | NULL    | NULL |     NULL | No tables used                               |
+----+-------------+------------+--------+---------------+------+---------+------+----------+----------------------------------------------+

Answer 1

我認為這應該適用於你使用SUM和CASE ：

SELECT C.Id,
  SUM(
    CASE 
    WHEN G.Grade > C2.Grade THEN 1 ELSE 0 
    END
  ) 
FROM Class C
  INNER JOIN Grade G ON C.Id = G.Class_Id
  LEFT JOIN (
      SELECT Grade, Student_Id, Class_Id
      FROM Class
        JOIN Grade ON Class.Id = Grade.Class_Id
      WHERE Class.Id = 1
    ) C2 ON G.Student_Id = C2.Student_Id
WHERE C.Id <> 1
GROUP BY C.Id

示例小提琴演示

- 編輯 -

在回應您的評論時，這是另一個應該更快的嘗試：

SELECT 
  Class_Id, 
  SUM(CASE WHEN Grade > minGrade THEN 1 ELSE 0 END)
FROM 
(
  SELECT 
    Student_Id,
    @classToCheck:=
      IF(G.Class_Id = 1, Grade, @classToCheck) minGrade ,
    Class_Id,
    Grade
  FROM Grade G
    JOIN (SELECT @classToCheck:= 0) t
  ORDER BY Student_Id, IF(Class_Id = 1, 0, 1)
  ) t
WHERE  Class_Id <> 1
GROUP BY Class_ID

還有更多樣品小提琴 。

Answer 2

您能否嘗試一下原始數據！ 這只是一個加入:)

select
  final.class_id, count(*) as total
from
  (
    select * from   
      (select student_id as p_student_id, grade as p_grade from table1 where class_id = 1) as partial
    inner join table1 on table1.student_id = partial.p_student_id
    where table1.class_id <> 1 and table1.grade > partial.p_grade    
  ) as final
 group by
  final.class_id;

sqlfiddle鏈接