libusb：錯誤[submit_bulk_transfer]提交失敗錯誤-1 errno = 2 - 我對LibUSB做錯了什么？
[英]libusb: error [submit_bulk_transfer] submiturb failed error -1 errno=2 - What am I doing wrong with LibUSB?
問題描述
好吧，我可能做了一些愚蠢的事，但我不能讓libusb讓我在我的生命中將數據傳輸到我的設備。
碼：
#include <iostream>
#include <iomanip>
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <signal.h>
#include <libusb-1.0/libusb.h>
#define EP_DATA_IN 0x83
#define EP_DATA_OUT 0x02
#define DEVICE_CONFIGURATION 0
int main(int argc, char **argv)
{
int rc;
libusb_context *ctx = NULL;
libusb_device_handle *dev_handle;
int actual = 0;
unsigned char *data = new unsigned char[4];
data[0]='a';data[1]='b';data[2]='c';data[3]='d';
rc = libusb_init(&ctx);
if(rc < 0) {
std::cout << "Init Error " << rc << std::endl;
return 1;
}
libusb_set_debug(ctx, 6);
dev_handle = libusb_open_device_with_vid_pid(ctx, 0x03eb, 0x2423);
if (!dev_handle) {
fprintf(stderr, "Error finding USB device\n");
return 2;
}
if(libusb_kernel_driver_active(dev_handle, DEVICE_CONFIGURATION) == 1) {
std::cout << "Kernel Driver Active" << std::endl;
if(libusb_detach_kernel_driver(dev_handle, DEVICE_CONFIGURATION) == 0)
std::cout << "Kernel Driver Detached!" << std::endl;
}
rc = libusb_claim_interface(dev_handle, DEVICE_CONFIGURATION);
if(rc != 0) {
std::cout << "Cannot Claim Interface" << std::endl;
return 3;
}
std::cout << "Data->" << data << "<-" << std::endl;
std::cout << "Writing Data..." << std::endl;
std::cout << "Trying endpoint " << EP_DATA_OUT << "." << std::endl;
rc = libusb_bulk_transfer(dev_handle, EP_DATA_OUT, data, sizeof(data), &actual, 100);
if(rc == 0 && actual == 4)
{
std::cout << "Writing Successful!" << std::endl;
}
else
{
std::cout << "Write Error! Rc: " << rc << " Actual transfered bytes: " << actual << "." << std::endl;
std::cout << "Error code means: " << libusb_error_name(rc) << std::endl;
}
rc = libusb_release_interface(dev_handle, 0);
if(rc!=0) {
std::cout << "Cannot Release Interface" << std::endl;
return 1;
}
if (dev_handle)
libusb_close(dev_handle);
libusb_exit(ctx);
return 0;
}
有問題的設備：
pi@testpi:~$ sudo lsusb -d 03eb: -v
Bus 001 Device 004: ID 03eb:2423 Atmel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03eb Atmel Corp.
idProduct 0x2423
bcdDevice 1.00
iManufacturer 1 ATMEL ASF
iProduct 2 Vendor Class Example
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 69
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 1
Device Status: 0x0001
Self Powered
當我對設備運行代碼時，我得到了什么：
pi@testpi:~/BatLogger/Interface/libusb_test$ ./make.sh
libusb: debug [libusb_get_device_list]
libusb: debug [libusb_get_device_descriptor]
libusb: debug [libusb_open] open 1.4
libusb: debug [usbi_add_pollfd] add fd 11 events 4
libusb: debug [libusb_kernel_driver_active] interface 0
libusb: debug [libusb_claim_interface] interface 0
Data->abcd<-
Writing Data...
Trying endpoint 2.
libusb: debug [add_to_flying_list] arm timerfd for timeout in 100ms (first in line)
libusb: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 4
libusb: error [submit_bulk_transfer] submiturb failed error -1 errno=2
libusb: debug [submit_bulk_transfer] first URB failed, easy peasy
libusb: debug [disarm_timerfd]
Write Error! Rc: -1 Actual transfered bytes: 0.
Error code means: LIBUSB_ERROR_IO
libusb: debug [libusb_release_interface] interface 0
libusb: debug [libusb_close]
libusb: debug [usbi_remove_pollfd] remove fd 11
libusb: debug [libusb_exit]
libusb: debug [libusb_exit] destroying default context
據我所知，我正在做的一切正確。 libusb_claim_interface返回OK，因為我使用的是自定義VID / PID組合，所以沒有預先存在的驅動程序連接到設備，並且EP_DATA_OUT是輸出端點（方向位為0，但對於“out”表示尊重沒有描述）。 出於煩躁，我還嘗試了所有其他可能的端點（0-16,0-16 | 1 << 7），所有這些端點都有完全相同的錯誤。
有什么傻事我錯過了嗎？ 我是否必須安裝內核模塊或其他東西才能使libusb對我好玩？ 我正在使用libusb-1.0。
libusb調試消息的error -1 errno=2是error -1 errno=2 。 其中errno=2對應於ERNOENT，但我能找到的與libusb一起的一些事情並沒有得到關於實際發生的事情的正確結論。
代碼是構建g++ -std=c++11 -Wall -lrt -lusb-1.0 main.cpp -o main.bin ，雖然我使用C ++的事實可能與這個問題無關，因為我不是使用其中一個C ++ libusb包裝器。
1 個解決方案
解決方案1
1 已采納 2017-05-22 22:34:08
好的，所以我想出了這個問題。
基本上，顯然，由於〜 原因 〜，我的設備的端點附加到配置0， 備用設置1 。
我不確定如何，或者甚至可以從lsusb的輸出中確定這一點，但是我有一些腳本用於針對PyUSB編寫的另一個設備，所以我對此進行了調整，並且它告訴我：
1 pi@testpi:~/BatLogger/Interface/libusb_test$ sudo python3 test.py
INFO:Main.Gui:Device: DEVICE ID 03eb:2423 on Bus 001 Address 004 =================
bLength : 0x12 (18 bytes)
bDescriptorType : 0x1 Device
bcdUSB : 0x200 USB 2.0
bDeviceClass : 0x0 Specified at interface
bDeviceSubClass : 0x0
bDeviceProtocol : 0x0
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0x03eb
idProduct : 0x2423
bcdDevice : 0x100 Device 1.0
iManufacturer : 0x1 ATMEL ASF
iProduct : 0x2 Vendor Class Example
iSerialNumber : 0x0
bNumConfigurations : 0x1
CONFIGURATION 1: 100 mA ==================================
bLength : 0x9 (9 bytes)
bDescriptorType : 0x2 Configuration
wTotalLength : 0x45 (69 bytes)
bNumInterfaces : 0x1
bConfigurationValue : 0x1
iConfiguration : 0x0
bmAttributes : 0xc0 Self Powered
bMaxPower : 0x32 (100 mA)
INTERFACE 0: Vendor Specific ===========================
bLength : 0x9 (9 bytes)
bDescriptorType : 0x4 Interface
bInterfaceNumber : 0x0
bAlternateSetting : 0x0
bNumEndpoints : 0x0
bInterfaceClass : 0xff Vendor Specific
bInterfaceSubClass : 0xff
bInterfaceProtocol : 0xff
iInterface : 0x0
INTERFACE 0, 1: Vendor Specific ========================
bLength : 0x9 (9 bytes)
bDescriptorType : 0x4 Interface
bInterfaceNumber : 0x0
bAlternateSetting : 0x1
bNumEndpoints : 0x6
bInterfaceClass : 0xff Vendor Specific
bInterfaceSubClass : 0xff
bInterfaceProtocol : 0xff
iInterface : 0x0
ENDPOINT 0x81: Interrupt IN ==========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x81 IN
bmAttributes : 0x3 Interrupt
wMaxPacketSize : 0x40 (64 bytes)
bInterval : 0x1
ENDPOINT 0x2: Interrupt OUT ==========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x2 OUT
bmAttributes : 0x3 Interrupt
wMaxPacketSize : 0x40 (64 bytes)
bInterval : 0x1
ENDPOINT 0x83: Bulk IN ===============================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x83 IN
bmAttributes : 0x2 Bulk
wMaxPacketSize : 0x40 (64 bytes)
bInterval : 0x0
ENDPOINT 0x4: Bulk OUT ===============================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x4 OUT
bmAttributes : 0x2 Bulk
wMaxPacketSize : 0x40 (64 bytes)
bInterval : 0x0
ENDPOINT 0x85: Isochronous IN ========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x85 IN
bmAttributes : 0x1 Isochronous
wMaxPacketSize : 0x100 (256 bytes)
bInterval : 0x1
ENDPOINT 0x6: Isochronous OUT ========================
bLength : 0x7 (7 bytes)
bDescriptorType : 0x5 Endpoint
bEndpointAddress : 0x6 OUT
bmAttributes : 0x1 Isochronous
wMaxPacketSize : 0x100 (256 bytes)
bInterval : 0x1
關鍵的一點是，有在任何端點INTERFACE 0: ，但在有端點INTERFACE 0, 1: 這足以說明INTERFACE 0有一個以上的版本，有了這個，很容易弄清楚我需要調用libusb_set_interface_alt_setting()來選擇正確的備用配置。
基本上，我最后補充說
rc = libusb_set_interface_alt_setting(dev_handle, DEVICE_CONFIGURATION, 1);
if(rc != 0) {
std::cout << "Cannot configure alternate setting" << std::endl;
return 3;
}
在我的C（++）代碼中調用libusb_claim_interface()之后，我現在可以寫入設備了。
使用Libusb 1.0發送中斷傳輸會返回LIBUSB_ERROR_IO，但在接收時不會
[英]Sending a interrupt transfer using Libusb 1.0 returns an LIBUSB_ERROR_IO but not when receiving
libusb_open 在 windows 10 上返回 LIBUSB_ERROR_NOT_SUPPORTED
[英]libusb_open returns LIBUSB_ERROR_NOT_SUPPORTED on windows 10
libusb_open在jni android中返回LIBUSB_ERROR_ACCESS
[英]libusb_open return LIBUSB_ERROR_ACCESS in jni android
聲明:本站的技術帖子網頁，遵循CC BY-SA 4.0協議，如果您需要轉載，請注明本站網址或者原文地址。任何問題請咨詢:yoyou2525@163.com.