如何在盡可能精簡的Lxc容器中運行實用程序

Question

需要的是在沒有Internet訪問權限並且無法寫入隨機文件系統位置的環境中運行安裝在主機上的命令行程序。 想要使用lxc。

• 盡可能共享主機的文件系統
• 單獨的網絡堆棧和用戶ID
• 非特權容器

問題是因為使用像ubuntu這樣的通用模板會安裝許多單獨的軟件，而我寧願從主機上使用lib等。

在將來的某些情況下，可以將其用於Evince或LibreOffice，以用於文檔中可能包含嵌入式腳本和跟蹤器或封閉源代碼的軟件，這些軟件可能效果不佳。

Answer 1

這是特權容器的情況，基於sshd模板，它將花費152 KiB的磁盤空間：

sudo lxc-create --template=$PWD/lxc-sshd-ubuntu --name=x
sudo lxc-start --name=x
sudo lxc-attach --name=x

# check disk space: du -hs /var/lib/lxc/x/rootfs

模板文件位於下面，它是從/usr/share/lxc/templates/lxc-sshd派生的，其中修復了一些錯誤，這些錯誤使分布式版本無法正常工作。 lxc-sshd-ubuntu

#!/bin/bash -eu
# © 2017 Harald Rudell <harald.rudell@gmail.com> (http://haraldrudell.com) ISC License.
auth_key= # undefined
options=$(getopt -o hp:n:S: -l help,rootfs:,path:,name:,auth-key: -- "$@")
if [ $? -ne 0 ]; then echo >&2 "parameter FAIL"; exit 1; fi
eval set -- "$options"
while true; do
    case "$1" in
        -h|--help)      usage $0 && exit 0;;
        -p|--path)      path=$2; shift 2;;
        --rootfs)       rootfs=$2; shift 2;;
        -n|--name)      name=$2; shift 2;;
        -S|--auth-key)  auth_key=$2; shift 2;;
        --)             shift 1; break ;;
        *)              break ;;
    esac
done
if [ $0 = "/sbin/init" ]; then
check_for_cmd() {
    cmd_path=`type $1`
    if [ $? -ne 0 ]; then echo "The command '$1' $cmd_path is not accessible on the system"; exit 1; fi
    cmd_path=`echo $cmd_path |cut -d ' ' -f 3`
}
    PATH="$PATH:/bin:/sbin:/usr/sbin"
    check_for_cmd /usr/sbin/init.lxc
    check_for_cmd sshd
    sshd_path=$cmd_path
    if [ -f /run-dhcp ]; then
        check_for_cmd dhclient
        check_for_cmd ifconfig
        touch /etc/fstab
        rm -f /dhclient.conf
        cat > /dhclient.conf << EOF
send host-name = gethostname();
EOF
        ifconfig eth0 up
        dhclient eth0 -cf /dhclient.conf
        echo "Container IP address:"
        ifconfig eth0 |grep inet
    fi
    exec /usr/sbin/init.lxc -- $sshd_path
    exit 1
fi
if [ -z "$path" ]; then echo "'path' parameter is required"; exit 1; fi
config="$path/config"
if [ -z "$rootfs" ]; then
    if grep -q '^lxc.rootfs' $config 2>/dev/null ; then
        rootfs=$(awk -F= '/^lxc.rootfs =/{ print $2 }' $config)
    else
        rootfs=$path/rootfs
    fi
fi
    tree="\
$rootfs/var/empty/sshd \
$rootfs/var/lib/empty/sshd \
$rootfs/etc/init.d \
$rootfs/etc/rc.d \
$rootfs/etc/ssh \
$rootfs/etc/sysconfig/network-scripts \
$rootfs/dev/shm \
$rootfs/run/sshd \
$rootfs/proc \
$rootfs/sys \
$rootfs/bin \
$rootfs/sbin \
$rootfs/usr \
$rootfs/tmp \
$rootfs/home \
$rootfs/root \
$rootfs/lib \
$rootfs/lib64"
    mkdir -p $tree
    ln -s /run $rootfs/var/run
    cat <<EOF > $rootfs/etc/passwd
root:x:0:0:root:/root:/bin/bash
sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
EOF
    cat <<EOF > $rootfs/etc/group
root:x:0:root
sshd:x:74:
EOF
ssh-keygen -t rsa -N "" -f $rootfs/etc/ssh/ssh_host_rsa_key
ssh-keygen -t dsa -N "" -f $rootfs/etc/ssh/ssh_host_dsa_key
    cat <<EOF > $rootfs/etc/ssh/sshd_config
Port 22
Protocol 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
UsePrivilegeSeparation yes
SyslogFacility AUTH
LogLevel INFO
LoginGraceTime 120
PermitRootLogin yes
StrictModes yes
PubkeyAuthentication yes
IgnoreRhosts yes
HostbasedAuthentication no
PermitEmptyPasswords yes
ChallengeResponseAuthentication no
EOF
    if [ -n "$auth_key" -a -f "$auth_key" ]; then
        u_path="/root/.ssh"
        root_u_path="$rootfs/$u_path"
        mkdir -p $root_u_path
        cp $auth_key "$root_u_path/authorized_keys"
        chown -R 0:0 "$rootfs/$u_path"
        chmod 700 "$rootfs/$u_path"
        echo "Inserted SSH public key from $auth_key into $rootfs/$u_path"
    fi
    init_path=$(realpath --relative-to=/ $(readlink -f /sbin/init))
    grep -q "^lxc.rootfs" $path/config 2>/dev/null || echo "lxc.rootfs = $rootfs" >> $path/config
cat <<EOF >> $path/config
lxc.utsname = $name
lxc.pts = 1024
lxc.cap.drop = sys_module mac_admin mac_override sys_time
lxc.aa_profile = unconfined
lxc.mount.entry = /lib lib none ro,bind 0 0
lxc.mount.entry = /bin bin none ro,bind 0 0
lxc.mount.entry = /usr usr none ro,bind 0 0
lxc.mount.entry = /sbin sbin none ro,bind 0 0
lxc.mount.entry = tmpfs run/sshd tmpfs mode=0644 0 0
lxc.mount.entry = /usr/share/lxc/templates/lxc-sshd $init_path none ro,bind 0 0
lxc.mount.entry = /etc/init.d etc/init.d none ro,bind 0 0
lxc.mount.auto = cgroup:mixed proc:mixed sys:mixed
EOF
if [ -d /etc/sysconfig/network-scripts ]; then
    cat <<EOF >> $path/config
lxc.mount.entry = /etc/sysconfig/network-scripts etc/sysconfig/network-scripts none ro,bind 0 0
EOF
    fi

    if [ -d /etc/rc.d ]; then
        cat <<EOF >> $path/config
lxc.mount.entry = /etc/rc.d etc/rc.d none ro,bind 0 0
EOF
    fi
    grep -q "^lxc.network.ipv4" $path/config || touch $rootfs/run-dhcp
    if [ "$(uname -m)" = "x86_64" ]; then
        cat <<EOF >> $path/config
lxc.mount.entry = /lib64 lib64 none ro,bind 0 0
EOF
    fi

Answer 2

使用以下腳本（如（Ubuntu））創建一個最小的非特權80 KiB lxc容器：

$ lxc-unpriv
Creating unprivileged container c89-170905-202915 with container root user ids: 100000:100000…
Container configuration file: /home/foxyboy/.local/share/lxc/c89-170905-202915/config

Must change ownership of the root file system to container’s root user: 100000:100000
Elevated privileges are required to execute: sudo chown --recursive 100000:100000 /home/foxyboy/.local/share/lxc/c89-170905-202915/rootfs
Unprivileged container was created successfully.

Useful commands:
Start the container: lxc-start --name=c89-170905-202915
Stop the container: lxc-stop --name=c89-170905-202915 --timeout=1
Get a command prompt in running container: lxc-attach --name=c89-170905-202915
Follow the container’s log: tail -F ~/.local/share/lxc/c89-170905-202915/c89-170905-202915.log
request ip address for urnning container: lxc-attach --name=c89-170905-201943 -- dhclient eth0
Get container ip addresses: lxc-info --name=c89-170905-202915 --ips
Run a command inside the container (container should be stopped): lxc-execute --name=c89-170905-202915 -- command args…

創建之后，可以像以下那樣測試執行命令：

lxc-execute --name=c89-170905-202915 -- hostname
c89-170905-202915

這是bash腳本：

#!/bin/bash -eu
# © 2017 Harald Rudell <harald.rudell@gmail.com> (http://haraldrudell.com) ISC License.
while [ $# -ge 1 ]; do case "$1" in
  --help) echo "lxc-unpriv [--name=name]"; exit;;
  --name=*) NAME="${1#*=}";;
  *) echo >&2 "unknown options: '$*' usage: lxc-unpriv [--name=name]"; exit 2;;
esac; shift; done
if [ ! "${NAME-}" ]; then NAME=`hostname --short`-`date --utc +%y%m%d-%H%M%S`; fi
root_uid=100000
root_gid=100000
echo "Creating unprivileged container $NAME with container root user ids: $root_uid:$root_gid…"
lxc-create --template=none --name="$NAME"
config=~/".local/share/lxc/$NAME/config"
echo "Container configuration file: $config"
if [ ! -s "$config" ]; then echo >2 "Container configuration file missing: '$config'"; exit 1; fi
rootfs=~/".local/share/lxc/$NAME/rootfs"
mkdir --parents \
"$rootfs/bin" \
"$rootfs/etc/init.d" \
"$rootfs/etc/rc.d" \
"$rootfs/etc/sysconfig/network-scripts" \
"$rootfs/home" \
"$rootfs/lib" \
"$rootfs/lib64" \
"$rootfs/proc" \
"$rootfs/root" \
"$rootfs/sbin" \
"$rootfs/sys" \
"$rootfs/tmp" \
"$rootfs/usr" \
"$rootfs/var"
touch "$rootfs/etc/fstab"
grep --quiet "^lxc.network.ipv4" "$config" || echo "send host-name = gethostname();" >"$rootfs/dhclient.conf"
ln --symbolic "$rootfs/run" "$rootfs/var/run"
cat <<EOF >"$rootfs/etc/passwd"
root:x:0:0:root:/root:/bin/bash
EOF
cat <<EOF >"$rootfs/etc/group"
root:x:0:root
EOF
cat <<EOF >>"$config"
lxc.include = /usr/share/lxc/config/ubuntu.common.conf
lxc.include = /usr/share/lxc/config/ubuntu.userns.conf
lxc.rootfs = $rootfs
lxc.utsname = $NAME
lxc.pts = 1024
lxc.cap.drop = sys_module mac_admin mac_override sys_time
lxc.aa_profile = unconfined
lxc.mount.entry = /bin bin none ro,bind 0 0
lxc.mount.entry = /etc/init.d etc/init.d none ro,bind 0 0
lxc.mount.entry = /lib lib none ro,bind 0 0
lxc.mount.entry = /sbin sbin none ro,bind 0 0
lxc.mount.entry = /usr usr none ro,bind 0 0
lxc.mount.auto = cgroup:mixed proc:mixed sys:mixed
EOF
if [ -d /etc/sysconfig/network-scripts ]; then cat <<EOF >>"$config"
lxc.mount.entry = /etc/sysconfig/network-scripts etc/sysconfig/network-scripts none ro,bind 0 0
EOF
fi
if [ -d /etc/rc.d ]; then cat <<EOF >>"$config"
lxc.mount.entry = /etc/rc.d etc/rc.d none ro,bind 0 0
EOF
fi
if [ "$(uname --machine)" = x86_64 ]; then cat <<EOF >>"$config"
lxc.mount.entry = /lib64 lib64 none ro,bind 0 0
EOF
echo "lxc.arch = x86_64" >>"$config"
fi
CMD=(sudo chown --recursive $root_uid:$root_gid "$rootfs")
echo -e "\nMust change ownership of the root file system to container’s root user: $root_uid:$root_gid"
echo "Elevated privileges are required to execute: ${CMD[*]}"
"${CMD[@]}"
echo -e "Unprivileged container was created successfully.\n\nUseful commands:"
echo "Start the container: lxc-start --name=$NAME"
echo "Stop the container: lxc-stop --name=$NAME --timeout=1"
echo "Get a command prompt in running container: lxc-attach --name=$NAME"
echo "Follow the container’s log: tail -F ~/.local/share/lxc/$NAME/$NAME.log"
echo "request ip address for urnning container: lxc-attach --name=c89-170905-201943 -- dhclient eth0"
echo "Get container ip addresses: lxc-info --name=$NAME --ips"
echo "Run a command inside the container (container should be stopped): lxc-execute --name=$NAME -- command args…"