[英]How to connect to loaclhost with Arduino via ethernet shield?
我需要將數據從 Arduino 發送到將在我的計算機上運行的本地服務器。 計算機通過連接到路由器的電纜連接到帶有 Eternet Shield 的 Wi-Fi、Arduino Uno。
我從 WebClient 示例中提取了一個標准草圖,並更改了我通過 ipconfig 找到的 IPv4 地址。 這應該可以解決問題(正如我在這里讀到的),但是端口監視器給出了“連接失敗”。 可能是什么問題呢?
#include <SPI.h>
#include <Ethernet.h>
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress server(192, 168, 1, 4); // numeric IP for Google (no DNS)
//char server[] = "localhost"; // name address for Google (using DNS)
IPAddress ip(192, 168, 1, 229);
EthernetClient client;
void setup() {
Serial.begin(9600);
Ethernet.init(4);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// start the Ethernet connection:
if (Ethernet.begin(mac) == 0) {
Serial.println("Failed to configure Ethernet using DHCP");
// no point in carrying on, so do nothing forevermore:
// try to congifure using IP address instead of DHCP:
Ethernet.begin(mac, ip);
}
// give the Ethernet shield a second to initialize:
delay(1000);
Serial.println("connecting...");
// if you get a connection, report back via serial:
if (client.connect(server, 3000)) {
Serial.println("connected");
// Make a HTTP request:
client.println("GET /search?q=arduino HTTP/1.1");
client.println("Host: localhost");
client.println("Connection: close");
client.println();
}
else {
// kf you didn't get a connection to the server:
Serial.println("connection failed");
}
}
void loop()
{
// if there are incoming bytes available
// from the server, read them and print them:
if (client.available()) {
char c = client.read();
Serial.print(c);
}
// if the server's disconnected, stop the client:
if (!client.connected()) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
// do nothing forevermore:
while (true);
}
}
應該禁用 Windows 防火牆
聲明:本站的技術帖子網頁,遵循CC BY-SA 4.0協議,如果您需要轉載,請注明本站網址或者原文地址。任何問題請咨詢:yoyou2525@163.com.