XBEE双工通信
[英]XBEE Duplex Communication
问题描述
I want to configure my Xbees in such a way that both of them can receive and also transmit data ? 
我想以这样的方式配置Xbees：它们都可以接收和传输数据吗？
I have two Xbee S1 modules. 我有两个Xbee S1模块。 One is currently configured as receiver and the other as transmitter. 当前一个配置为接收器，另一个配置为发送器。 At certain times, I want the receiver module to transmit data as well. 在某些时候，我希望接收器模块也发送数据。
Could anyone give a link to a tutorial which shows how this can be done ? 任何人都可以链接到显示该操作方法的教程吗？
Thanks in advance. 提前致谢。
1 个解决方案
解决方案1
1 已采纳 2013-03-20 22:14:26
Yes, it's possible to do that. 是的，有可能这样做。 If you have them configured with "AT mode" software, you just need to set the DH and DL parameters on XBee A to the SH and SL values from XBee B, and vice-versa (B.DH = A.SH, B.DL = A.SL). 如果使用“ AT模式”软件配置它们，则只需将XBee A上的DH和DL参数设置为XBee B的SH和SL值，反之亦然（B.DH = A.SH，B。 DL = A.SL）。
Now any characters going in the serial port on A will come out the serial port on B, and any that come in on B will go out on A. 现在，在A上的串行端口中输入的所有字符都将从B上的串行端口输出，而在B上输入的任何字符都将在A上输出。
声明:本站的技术帖子网页，遵循CC BY-SA 4.0协议，如果您需要转载，请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.