[英]JTag Debugging with Eclipse Mars CDT : “Program file does not exist”
I have successfully compiled an ARM embedded project, next files has been created:我已经成功编译了一个 ARM 嵌入式项目,已经创建了下一个文件:
MyProject.elf
MyProject.bin
MyProject.hex
MyProject.map
MyProjectmd5.bin
Then I am going to Run -> Debug Configurations -> GDB SEGGER J-Link Debugging -> New -> Debug
and I get the error:然后我要
Run -> Debug Configurations -> GDB SEGGER J-Link Debugging -> New -> Debug
,我得到错误:
Program file does not exist
The GCC Compiler for ARM used: https://launchpad.net/gcc-arm-embedded使用的 ARM 的 GCC 编译器: https : //launchpad.net/gcc-arm-embedded
ARM Eclipse plugins used: http://gnuarmeclipse.livius.net/blog/使用的 ARM Eclipse 插件: http : //gnuarmeclipse.livius.net/blog/
and that's what I see in the console:这就是我在控制台中看到的:
23:25:36 **** Build of configuration Release for project MyProject ****
make all
Invoking: Cross ARM GNU Print Size
arm-none-eabi-size --format=berkeley "MyProject.elf"
text data bss dec hex filename
40120 252 2252 42624 a680 MyProject.elf
Finished building: MyProject.siz
23:25:36 Build Finished (took 112ms)
It seems that there is a problem running JLinkGDBServer运行JLinkGDBServer好像有问题
$ JLinkGDBServer
SEGGER J-Link GDB Server V4.98e Command Line Version
JLinkARM.dll V4.98e (DLL compiled May 5 2015 11:59:38)
-----GDB Server start settings-----
GDBInit file: none
GDB Server Listening port: 2331
SWO raw output listening port: 2332
Terminal I/O port: 2333
Accept remote connection: yes
Generate logfile: off
Verify download: off
Init regs on start: off
Silent mode: off
Single run mode: off
Target connection timeout: 0 ms
------J-Link related settings------
J-Link Host interface: USB
J-Link script: none
J-Link settings file: none
------Target related settings------
Target device: unspecified
Target interface: JTAG
Target interface speed: 1000kHz
Target endian: little
Connecting to J-Link...
J-Link is connected.
Firmware: J-Link OB-SAM3U128-V2-NordicSemi compiled May 4 2015 13:48:48
Hardware: V1.00
S/N: 681968347
Checking target voltage...
Target voltage: 3.30 V
Listening on TCP/IP port 2331
Connecting to target...ERROR: Could not connect to target.
Target connection failed. GDBServer will be closed...Restoring target state and closing J-Link connection...
Shutting down...
Could not connect to target.
C/C++ Application in Main TAB was missing.主选项卡中的 C/C++ 应用程序丢失。 OK using
Debug/MyProject.elf
OK 使用
Debug/MyProject.elf
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.