AWS VPC VPN IPsec 到客户网关
[英]AWS VPC VPN IPsec to customer gateway
问题描述
I am trying to make a VPN IPsec connection between customer gateway and aws virtual private gateway.
我正在尝试在客户网关和 aws 虚拟专用网关之间建立 VPN IPsec 连接。 The tunnels status is up.隧道状态为 up。 But, when I'm doing ping from customer's subnet to VPC's subnet - nothing happens.但是，当我从客户的子网到 VPC 的子网执行 ping 操作时 - 什么也没有发生。 Does anyone know why ?有谁知道为什么？ Thanks!谢谢！
1 个解决方案
解决方案1
0 2021-08-11 21:39:50
Check if you have done these things:检查你是否做了这些事情：
- Have you configured the routes in your AWS VPC network?您是否在 AWS VPC 网络中配置了路由？ Write the IP range of your peer VPC and link it to the Virtual Cloud Gateway.写入对等 VPC 的 IP 范围并将其链接到虚拟云网关。
- Have you specified the firewall rules in AWS (via the security groups of the VMs - allow ingress ICMP protocol to all ports).您是否在 AWS 中指定了防火墙规则（通过 VM 的安全组 - 允许所有端口的入口 ICMP 协议）。 Have you also configured the firewall rules on your peer VPC to allow egress ICMP protocol?您是否还在对等 VPC 上配置了防火墙规则以允许出口 ICMP 协议？
声明:本站的技术帖子网页，遵循CC BY-SA 4.0协议，如果您需要转载，请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.
相关问题
AWS VPN 到 AWS VPC - AWS VPN to AWS VPC
适用于VPC / VPN的AWS Cloudfront - AWS Cloudfront for VPC/VPN
AWS VPC中的VPN设备 - VPN appliance in AWS VPC
通过VPC将AWS VPN NAT转换为AWS IOT - NAT AWS VPN to AWS IOT via VPC
如何在 AWS 上调试站点到站点 VPN 隧道 IPSec？ - How to debug a Site-to-Site VPN tunnel IPSec on AWS?
Terraform（AWS）使用非默认参数创建VPN IPSec连接 - Terraform (AWS) create VPN IPSec connection with non-default parameters
AWS 多 VPC VPN 共享可能性 - AWS Multi VPC VPN Sharing Possibility
AWS VPC将流量路由到客户端VPN连接 - AWS VPC route traffic to Client VPN connections
如何将 aws vpc 和 gcp bigquery 与 vpn 连接？ - How to connect aws vpc and gcp bigquery with vpn?
AWS IP 地址用于 terraform IPSec 隧道（通过 Transit Gateway） - AWS IP address to use in terraform IPSec tunnels (via Transit Gateway)
相关标签