[英]Windows 10 Installation on a SSD error: “ We couldn't create a new partition…”
I have an Acer Nitro 5 with a Gigabyte 512gb ssd and a WD 1TB hhd.我有一个带有技嘉 512gb ssd 和 WD 1TB hhd 的 Acer Nitro 5。 Recently after installing Ubuntu on my hdd (because i didn't want to change the sata mode), I also wanted a clean Windows install.
最近在我的硬盘上安装 Ubuntu 之后(因为我不想更改 sata 模式),我还想要一个干净的 Windows 安装。 So I created a boot usb from media creation tool and go forward with it.
所以我从媒体创建工具创建了一个启动 usb 和 go 向前。 It didn't work.
它没有用。 I got the "We couldn't create a new partition or locate an existing one" error, which i spent a significant amount of time trying to search for a solution.
我收到“我们无法创建新分区或找到现有分区”错误,我花了大量时间试图寻找解决方案。
Stuffs i tried: - Format my ssd - use diskpart to clean, convert my ssd partition table to gpt, etc like every guide online recommends.我试过的东西: - 格式化我的 ssd - 使用 diskpart 清理,将我的 ssd 分区表转换为 gpt 等,就像每个在线指南推荐的那样。 - Make another boot usb, this time with rufus.
- 再次启动 usb,这次使用 rufus。 Didn't work.
没用。
Stuffs I didn't try: - Temporarily disconnect my hdd.我没有尝试的东西: - 暂时断开我的硬盘。 I don't have the tools to do that physically, and my acer uefi has zero options regarding this, like most guides suggests.
我没有物理上的工具来做到这一点,而且我的 acer uefi 对此的选择为零,就像大多数指南所建议的那样。 - Change to bios-legacy boot mode.
- 更改为 bios-legacy 启动模式。 There's no option in the uefi.
uefi中没有选项。
I think it would be fine if i try to install windows on my hdd though, but haven't try it yet.我认为如果我尝试在我的硬盘上安装 windows 会很好,但还没有尝试过。 All I know is installing windows on a ssd is much harder but didn't expect it to produce this much annoyance.
我所知道的是在 ssd 上安装 windows 要困难得多,但没想到它会产生这么多的烦恼。
I heard there's an option to install on a HDD, the.我听说有一个选项可以安装在 HDD 上。 use a third party tool to copy it to a SSD, but i haven't look into it.
使用第三方工具将其复制到 SSD,但我还没有研究它。
Thanks for any help given..感谢您提供的任何帮助..
Assuming you have Windows 10 installed and working on your SSD go to Settings > Update & Security > Recovery > Reset this PC > Get started
and then select if you want your files kept you want clean reinstall.假设您已安装 Windows 10 并在您的 SSD go 上工作,
Settings > Update & Security > Recovery > Reset this PC > Get started
,然后 select Again - from your post I assume the latter so just click Remove everything"
confirm and wait. It will take (depending on the machine) 1-2 hours.再次 - 从您的帖子中,我假设是后者,因此只需单击
Remove everything"
确认并等待。这将需要(取决于机器)1-2 小时。
I've found this to be the easiest way to have clean install without wondering how do I get it installed on my laptop/pc.我发现这是进行全新安装的最简单方法,而无需考虑如何将其安装在我的笔记本电脑/PC 上。
My recommendation though - back up your ubuntu partition - I can't guarantee that windows installer won't clean up HDD you have (it's supposed to clean only SSD but better be safe than sorry).不过我的建议是 - 备份你的 ubuntu 分区 - 我不能保证 windows 安装程序不会清理你拥有的硬盘(它应该只清理 SSD,但最好安全而不是抱歉)。
Here's the link to detailed instructions . 这是详细说明的链接。 It's based on 1903 compilation - if your's older it will still look very similar.
它基于 1903 年的编译 - 如果您的年龄较大,它看起来仍然非常相似。
If your windows isn't working then use diskpart to clean the drive, boot the computer from USB windows installation stick and choose the drive for your installation - it will/should create appropriate partitions and start installing.如果您的 windows 无法正常工作,则使用 diskpart 清理驱动器,从 USB windows 安装棒启动计算机并为您的安装选择合适的驱动器 - 它会/应该开始安装。
If it won't change boot order so the SSD is first on the list and HDD next and repeat the previous step.如果它不会改变启动顺序,那么 SSD 会在列表中排在第一位,HDD 排在后面,然后重复上一步。
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.