[英]When creating a Minecraft server, do I have to use my Suddenlink modem/router provided by the ISP or can I use my secondary Nighthawk router?
I have a modem/router that is provided by my ISP that is still in use, but I also have an additional Nighthawk router that I primarily connect to.我的 ISP 提供的调制解调器/路由器仍在使用中,但我还有一个主要连接到的附加 Nighthawk 路由器。 I'm not sure if there is any issue with using the Nighthawk router as opposed to the modem/router.
我不确定使用 Nighthawk 夜鹰路由器而不是调制解调器/路由器是否有任何问题。 One piece of evidence that makes me think the Nighthawk is not designed to be used like that is that when I type in my default gateway into my internet browser, it says not safe, while the modem/router says that it's safe.
让我认为 Nighthawk 夜鹰不是为那样使用而设计的一个证据是,当我在我的互联网浏览器中输入我的默认网关时,它说不安全,而调制解调器/路由器说它是安全的。
In short, can I use my Nighthawk router as my server's connection, or must I use the default modem/router provided by the ISP?简而言之,我可以使用 Nighthawk 夜鹰路由器作为服务器的连接,还是必须使用 ISP 提供的默认调制解调器/路由器?
It depends.这取决于。 If your Nighthawk is connected to your ISP's router and is not set up as an access point, and all your devices are connected to the Nighthawk, then you have a double NAT in place, meaning that within the local IP's of the ISP router, there is another subnet with more local IP's(the Nighthawk subnet).
如果您的 Nighthawk 夜鹰连接到您的 ISP 的路由器并且没有设置为接入点,并且您的所有设备都连接到 Nighthawk,那么您有一个双 NAT,这意味着在 ISP 路由器的本地 IP 中,有是另一个具有更多本地 IP 的子网(夜鹰子网)。 In order to properly portforward, the router should forward traffic directly to the local IP, which is not possible if the device is attached to another subnet.
为了正确进行端口转发,路由器应将流量直接转发到本地 IP,如果设备连接到另一个子网,这是不可能的。 However, you could forward a port from the ISP router to the Nighthawk to your computer, but this may not work.
但是,您可以将 ISP 路由器到 Nighthawk 夜鹰的端口转发到您的计算机,但这可能行不通。
If your Nighthawk is configured as an access point it doesn't matter.如果您的 Nighthawk 夜鹰配置为接入点,则无关紧要。 You can connect the server to either router but you must set up port forwarding on the ISP router.
您可以将服务器连接到任一路由器,但您必须在 ISP 路由器上设置端口转发。
You have a few options if it is not configured as an access point.如果未将其配置为接入点,您有几个选择。
Just configure it as an access point (pretty painless, saves time in the future)只需将其配置为接入点(非常轻松,将来可以节省时间)
Connect the server to the ISP router and portforward from there (also works, but your server cannot access other devices connected to the Nighthawk)将服务器连接到 ISP 路由器并从那里进行端口转发(也可以,但您的服务器无法访问连接到 Nighthawk 的其他设备)
Do a double portforward from the ISP router to the Nighthawk, then from the Nighthawk to the server (may not work)从 ISP 路由器到 Nighthawk 进行双端口转发,然后从 Nighthawk 到服务器(可能不起作用)
Use a vpn service such as Hamachi (may be slow)使用诸如Hamachi之类的 vpn 服务(可能很慢)
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.