How to properly close Internet Explorer when launched from PowerShell?

Question

There was a set of recently asked questions about doing something with Internet Explorer via PowerShell. All of them contain codes to launch IE from PowerShell as an object, via $ie=new-object -comobject InternetExplorer.Application . The problem is, the proper way of closing IE that consists of calling $ie.quit() does not work - first, if that IE would have happened to have more than a single open tab, IE doesn't quit as a whole and only the tab that corresponds to the COM object is closed, and second, should it have only one tab, the window gets closed but the processes remain.

PS > get-process iexplore

Handles  NPM(K)    PM(K)      WS(K) VM(M)   CPU(s)     Id ProcessName
-------  ------    -----      ----- -----   ------     -- -----------
    352      31     7724      24968   142     0,58   3236 iexplore
    228      24    22800      15384   156     0,19   3432 iexplore

I have tried to research the methods on how to close a process started via New-Object -ComObject , and have found this: How to get rid of a COMObject . The example of that COMObject is Excel.Application , which indeed behaves as intended - calling quit() makes window close, and executing [System.Runtime.Interopservices.Marshal]::ReleaseComObject($ex) if $ex is a created COMObject stops the Excel process. But this is not the case with Internet Explorer.

I have also found this question: How to get existing COM Object of a running IE which provides code to connect to IE via list of open windows, and works to an extent of IE launched from elsewhere, but if the COM object is created via PowerShell, this script is not able to completely stop IE's processes, if modified as such:

$shellapp = New-Object -ComObject "Shell.Application"
$ShellWindows = $shellapp.Windows()
for ($i = 0; $i -lt $ShellWindows.Count; $i++)
{
 if ($ShellWindows.Item($i).FullName -like "*iexplore.exe")
  {
  $ie = $ShellWindows.Item($i)
  $ie.quit()
  [System.Runtime.Interopservices.Marshal]::ReleaseComObject($ie)
  }
}

In case of IE launched outside of PowerShell, the processes are stopped, but in case of IE launched within PowerShell, two processes remain, and this code reports to have found no IE windows to reach COM objects, therefore IE processes are (yet) unable to be stopped.

So, how to reach the apparently orphaned windowless IE processes and gracefully stop them? I am aware of Get-Process iexplore | Stop-Process Get-Process iexplore | Stop-Process , but this will stop any and all IEs, not just those launched by the script, and if the script is run as administrator or SYSTEM on a, say, remote desktop server, everyone's IEs will be stopped.

Environment: OS Windows 7 x64, PowerShell 4 (installed above PS version 2), IE11 version 11.0.9600.17691 (automatically updated). IE set to "Open home page" upon starting, so at least one tab is always open.

Answer 1

Simply calling the Quit() method should normally suffice for gracefully terminating Internet Explorer processes, regardless of whether they were created by running iexplore.exe or by instantiating a COM object in PowerShell.

Demonstration:

PS C:\> 
AMD64
PS C:\> 
Microsoft Windows 8.1 Enterprise
PS C:\> 
PS C:\> 
PS C:\> 

Handles  NPM(K)    PM(K)      WS(K) VM(M)   CPU(s)     Id ProcessName
-------  ------    -----      ----- -----   ------     -- -----------
    352      20     4244      14164   176     0.05   3460 iexplore
    407      32     6428      23316   182     0.23   5356 iexplore

PS C:\> 
PS C:\> 
PS C:\> _

If you have orphaned Internet Explorer processes to which you don't have a handle you can cycle through them like this:

(New-Object -COM 'Shell.Application').Windows() | Where-Object {
    $_.Name -like '*Internet Explorer*'
} | ForEach-Object {
    $_.Quit()
}

To be totally on the safe side you can release the COM object after calling Quit() and then wait for the garbage collector to clean up:

(New-Object -COM 'Shell.Application').Windows() | Where-Object {
    $_.Name -like '*Internet Explorer*'
} | ForEach-Object {
    $_.Quit()
    [Runtime.Interopservices.Marshal]::ReleaseComObject($_)
}

[GC]::Collect()
[GC]::WaitForPendingFinalizers()

Answer 2

I've had similar problems with COM objects that wouldn't terminate using the quit() method. Interopservices.marshall also doesn't work a lot of times. My workaround : I do a get-process to get a list of all procs before I call the com object and right after : this way I have the PID of my instance. After my script runs it kills the process using stop-process.

Not the best way to do this but at least it works

Answer 3

With a quick look around in the ComObject for IE, it seems that when it is created, it gives you a direct interface to the methods that make interacting with IE easier, for example Navigate() or ReadyState .

I did discover a property that seems to be what you are looking for and that would be Parent

Calling $IE.Parent.Quit() seemed to get rid of the PowerShell created instances.

$IE = New-Object -ComObject InternetExplorer.Application
Get-Process | Where-Object {$_.Name -Match "iex"}

Handles  NPM(K)    PM(K)      WS(K) VM(M)   CPU(s)     Id ProcessName
-------  ------    -----      ----- -----   ------     -- -----------
    291      20     5464      14156   200     0.16   1320 iexplore
    390      30     5804      20628   163     0.14   5704 iexplore

$IE.Parent.Quit()
(Get-Process | Where-Object {$_.Name -Match "iex"}).GetType()
You cannot call a method on a null-valued expression...

Answer 4

I tried an experiment with Powershell launching Excel via COM:

$x = New-Object -com Excel.Application
$x.Visible = $True
Start-Sleep 5 # make it stay visible for a little while
$x.Quit()
$x = 0 # Remove .NET's reference to com object
[GC]::collect() # run garbage collection

As soon as [GC]::collect() finished the process disappeared from taskmgr. This makes sense to me, because (in my understanding) a COM client is responsible for releasing references to the COM server. In this case .NET (via a Runtime Callable Wrapper) is the COM client.

The situation may be more complicated with IE, since there may be other tabs associated with a given IE process (and there's the frame merging that @Noseratio mentions), but at least this will get rid of the reference created by the PS script .

Answer 5

There's HKCU\\Software\\Microsoft\\Internet Explorer\\Main\\FrameMerging registry key that prevents merging IE "frame" processes, explained here . I haven't tried it myself, but I think it might solve your problem if you set it before you instantiate the InternetExplorer.Application COM object.

If that doesn't help, try launching a new IE instance with the following command line, prior to creating the COM object (I haven't tried that, either):

• iexplore.exe -noframemerging -private -embedding

There is a possible race condition before this IE instance becomes available as a COM server, so you may want to put some delay before you create an object.

Answer 6

这可能对您有用：

Get-Process | Where-Object {$_.Name -Match "iexplore"} | Stop-Process

Answer 7

此命令关闭当前打开/运行的所有 Internet Explorer 窗口：

Get-Process iexplore | Stop-Process