What's the difference between ASP.NET Core Hosted and Server-Side Blazor, really?

Question

I'm still struggling to understand the difference between ASP.NET Core Hosted and Server-side Blazor. I know same question already exists , but it's not satisfying. In fact, I couldn't find the satisfying answer anywhere - the answers were more or less the same.

If hosted option uses server (IIS, Kestrel), then why server-side ? Confusing... It's a shame that official documentation didn't shed the light either...

UPDATE

The confusion stems from the fact that we have THREE options to create Blazor application. After executing dotnew new --list I get:

1. dotnet new blazorserver (Blazor Server App)

2. dotnet blazorwasm (Blazor WebAssembly App)

However, there's a third option:

3. dotnet blazorwasm --hosted (or dotnet blazor --hosted )

It's the same as check box in Visual Studio when creating application:

The documentation says:

you have the option of configuring the app to use an ASP.NET Core backend by selecting the ASP.NET Core hosted check box

But no explanation was provided what does it mean...

Answer 1

Re this part of your question:

However, there's a third option:

3. dotnet blazorwasm --hosted (or dotnet blazor --hosted )

It's the same as check box in Visual Studio when creating application:

The documentation says:

you have the option of configuring the app to use an ASP.NET Core backend by selecting the ASP.NET Core hosted check box

But no explanation was provided what does it mean...

TL;DR

'Hosted' is used where you want the back-end of your site and the Blazor client using that back-end to both be hosted on the same website.

In Detail

I agree, the documentation really isn't terribly clear about all of this, but the explanation is actually simpler than it seems:

The Blazor app has to be 'hosted' somewhere

The first thing to remember is that the Blazor WebAssembly 'app' is not a standalone website , it's an app that's embedded in a website. In a lot of cases it will behave like a website, because it will be used as a Single Page Application, but that is by no means required.

Essentially the Blazor WebAssembly app is a series of files and a JavaScript file that are created by compiling/publishing your Blazor project.

Those files then need to be put on a website somewhere and the combination of the name of a div tag and the Blazor JS file produced for your site deals with wiring your app files into the WebAssembly part of the browser so that it's then rendered on the page.

The key here is that the website 'hosting' your Blazor app does not have to be an ASP.NET Core site . It could be any site, pure HTML, Drupal, whatever, it just needs to be shown on a browser that handles WebAssembly and JavaScript correctly.

However, if you're also writing the backend of your site in ASP.NET Core, you can reuse that site

So, your Blazor project doesn't have to be hosted in a website written in ASP.NET Core, but it does have to be hosted somewhere (so the user can see it).

If you're also writing the back-end of the site at the same time, eg if you're writing an API or SignalR hub to send and receive data from your Blazor client, and if you're writing that back-end in ASP.NET Core, then you can reuse that same site to also host your Blazor client.

This scenario is what the 'Hosted' option is for.

If you create a project using the template in the screenshot above, with the 'hosted' option ticked, you'll see that the [YourProjectName].Server project that's created is the Start Up project, but the index.html page that's shown when you run that project has come from the [YourProjectName].Client project.

This approach means you only have one site running on your server (which could be good or bad) and also means you won't run across any CORS issues .

But you don't have to have an ASP.NET Core site at all

If your Blazor site is a standalone site that doesn't read/write from any server, or if it only talks to 3rd party APIs or an existing Web API running on the older .NET Framework, then you don't actually need an ASP.NET Core site at all.

In that case you don't use the 'hosted' option .

Instead, you can simply publish your Blazor project and then take the files from the release folder and host them in any site.

Answer 2

Update

I see where you are coming from now. The confusion stems from the fact that you have an option called --hosted when using the client-hosted Blazor. This options means having Blazor to include ASP.NET Core runtime.

Why this option? Because you can write an offline app (eg calculator app) that does not need any kind of connection to external services, making ASP.NET Core irrelevant. However, you might want to write an online app that accesses online DB, external APIs, do verification, etc. For these kind of apps, you will need an ASP.NET Core stack to support your app.

Check this FAQ: https://github.com/aspnet/Blazor/wiki/FAQ#q-can-i-use-blazor-with-aspnet-core-on-the-server

Original answer

They are two hosting models: server-hosted, and client-hosted.

The difference is whether the app is hosted in server, or in client. Server hosting means your app logic runs in the server (you can think of it similar to what Web Forms is), you click on a button, an "Ajax" call sends the request, the server receives the request, and sends back the updated page. However, here it uses SignalR not Ajax, which is a low level socket communication (read efficient). And instead of updating a whole page, it updates only the relevant parts (thus it is a single page application).

On the other hand, client hosting means your logic runs within the browser. Think of it as if your C# logic is converted into JS, and it is embedded in the page. So the logic runs in the browser. This is possible after the introduction of WebAssembly which you might want to read about.

Let's say you want to create a calculator app. Your server hosted app will then need to communicate with the server to calculate and get the result for each calculation, while the client hosted does not need, and calculates the result in browser.

You might wonder, why we have two options. The reason being that support for WebAssembly (which a client hosted app relies on) is either incomplete or non-existant in many browsers, and performance differs widely too.

https://caniuse.com/#feat=wasm

Answer 3

The question is about the option "ASP.NET Core hosted" in Visual Studio, while creating a new Blazor Project with Blazor WebAssembly App.

Selecting this option scaffolds out 3 Projects for you (vs 1 WebAssembly project, if this option is not selected)

1. Server Side Blazor Project
2. Client Side Blazor Project (WebAssembly)
3. Shared project for shared entities between Server and Client Projects.

With this option you can have

1. Blazor WebAssembly only option for sections of your project where the logic can execute in browser.
2. Server hosted option where all the processing is done on server and only HTML is rendered onto the browser.

When deployed, all these projects go to the same location. So if you have a requirement for both Server Side as well as Client side options, then go for it.

Answer 4

I too had the same confusion while reading the documentation. But it was explained in Blazor webassembly section

dotnet blazorwasm - is a standalone project

dotnet blazorwasm --hosted (or dotnet blazor --hosted) - is a projected hosted with ASP.NET Core backing API's.

A hosted deployment serves the Blazor WebAssembly app to browsers from an ASP.NET Core app that runs on a web server.

The client Blazor WebAssembly app is published into the /bin/Release/{TARGET FRAMEWORK}/publish/wwwroot folder of the server app, along with any other static web assets of the server app.The two apps are deployed together. A web server that is capable of hosting an ASP.NET Core app is required. For a hosted deployment, Visual Studio includes the Blazor WebAssembly App project template (blazorwasm template when using the dotnet new command) with the Hosted option selected (-ho|--hosted when using the dotnet new command).

Answer 5

One big advatage of the blazor asp.net core hosted model is that one that you can use many great things from the server, but still they need to be called via API. Which is totally OK if you are not wiling to use blazor server side or blazor client side without eg Identity System.

Answer 6

So Blazor server uses SignalR to communicate between server and client whereas Blazor WASM uses WASM(client-side, no communication after the first load) with backend asp.net core(if --hosted).

Answer 7

Here are my two cents. Create a Blazor WebAssembly App with ASP.NET Core Hosted check box selected. Once created observe the project references.

Note that the server project references client project. I had this same confusion as others, so this project references puzzled me. The client project is hosted by and served by the server project.

Also when you want to run the project, you must ensure to set the Server project as the startup project and not both the server and client. Due to my initial misunderstanding, I was setting multiple startup project, thinking that the client(something like React App) calls the server(WebApi)

The following is INCORRECT .

If you do that, you get the following error, and this stuck me for quite some time and made me thinking.

Microsoft Visual Studio - One or more errors occurred. Failed to launch debug adapter error

And finally if you are thinking to dockarize by adding docker files and docker-compose files for different kinds of Blazor apps, do take a look at this github repo .

Specifically for this kind of apps that we are talking about take a look at this and this folder in that repo.

Answer 8

Blazor-WASM Application can work offline after the first loading. As an Example If you make Loan calculator with Blazor WASM, you can send all the data, business logic and validation to the client side in the first load like loan types, loan rates, max repayment period like that then because of the logic also in client side, it don't need do the communication with the server again and again when you change the loan type or repayment period because business logic in client side using the user selected data blazor can render the UI and show the result.

Blazor-server Application use server to render the UI so as on the Loan application if user change the loan type blazor send that user change value to server using SignalR and in the server has data and the logic for get the result, after that server render UI and send UI changes to the client side using SignalR and redraw the UI in clients screen.

Blazor-ASP.NET Core Hosted Visual studio generate 3 projects in the core hosted template

• ClientProject - this is a Blazor-WASM applicattion
• ServerProject - this is a .NET CORE API
• SharedClassProject - this is a class library hold shared objects between client and server

as the loan example in the first load loan types and calculation logics are load in the client side. if user select the loan type blazor create http call to the API application to get the loan rates according to the selected loan type if interest rate is in the db then user enter the repayment period because of calculation logic in client side now application can calculate the result and render the UI to show the result. so with this model you can keep some of data or logics in the server and other data or logics in client side.