Launch iOS simulator from Xcode and getting a black screen, followed by Xcode hanging and unable to stop tasks

Question

I'm having trouble running my basic iPhone application (while going through the Stanford iTunes CS193p lectures) in the iOS simulator.

I've been searching for a while (both Google and SO), but unable to find a solution so far. There are many similar bugs, but the solutions don't seem to fix this.

In Xcode I click "run". It compiles and builds successfully, launches iOS simulator but it never gets to loading the app. Only the status bar at the top. With a black screen.

I've only written very basic code (following along with the lectures) and can't get past this problem.

To confuse matters more, I wrote a web wrapper (UIWebView) before these lectures and this works fine. But there is barely any difference in the code. All new apps I create from scratch all fail with the same black screen problem.

If I hit the home button on the simulator and launch the app, it will display. But Xcode doesn't seem to know what's going on.

It's as if Xcode has lost the ability to talk to iOS Simulator and assumes it's running (even if I quit iOS simulator). I try and quit Xcode, and it asks me to stop the tasks. Then it just hangs. So I have to force restart to get out of Xcode.

I'm using: OSX 10.8.2 Xcode 4.5.2 iOS Simulator 6.0

CalculatorAppDelegate.h

#import <UIKit/UIKit.h>

@interface CalculatorAppDelegate : UIResponder <UIApplicationDelegate>

@property (strong, nonatomic) UIWindow *window;

@end

CalculatorAppDelegate.m

#import "CalculatorAppDelegate.h"

@implementation CalculatorAppDelegate

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions (NSDictionary *)launchOptions
{
    // Override point for customization after application launch.
    return YES;
}

- (void)applicationWillResignActive:(UIApplication *)application
{
// Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state.
// Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game.
}

- (void)applicationDidEnterBackground:(UIApplication *)application
{
// Use this method to release shared resources, save user data, invalidate timers, and store enough application state information to restore your application to its current state in case it is terminated later. 
// If your application supports background execution, this method is called instead of applicationWillTerminate: when the user quits.
}

- (void)applicationWillEnterForeground:(UIApplication *)application
{
// Called as part of the transition from the background to the active state; here you can undo many of the changes made on entering the background.
}

- (void)applicationDidBecomeActive:(UIApplication *)application
{
// Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface.
}

- (void)applicationWillTerminate:(UIApplication *)application
{
// Called when the application is about to terminate. Save data if appropriate. See also applicationDidEnterBackground:.
}

@end

CalculatorViewController.h

#import <UIKit/UIKit.h>

@interface CalculatorViewController : UIViewController
@property (weak, nonatomic) IBOutlet UILabel *display;

@end

CalculatorViewController.m

#import "CalculatorViewController.h"

@implementation CalculatorViewController

@synthesize display = _display;

- (IBAction)digitPressed:(UIButton *)sender
{
    NSString *digit = [sender currentTitle];
NSLog(@"digit pressed = %@", digit);
}

@end

Answer 1

Surprisingly, what worked for me was going to iOS Simulator menu, and pressing "Reset Content and Settings". (in iOS 13, its under Hardware)

Answer 2

Before resetting the emulator first go to your projects " project navigator " screen and under the general -> depoyment info screen check that the main interface property is properly setup!

Answer 3

If you're using SwiftUI

If you're updating from a previous version of Xcode 11, there are some changes to the SceneDelegate willConnectTo session: options connectionOptions initialization:

The main window is now initialized using UIWindow(windowScene: windowScene) , where it use to be UIWindow(frame: UIScreen.main.bounds)

On previous version:

    let window = UIWindow(frame: UIScreen.main.bounds)
    window.rootViewController = UIHostingController(rootView: ContentView())
    self.window = window
    window.makeKeyAndVisible()

In new version:

    if let windowScene = scene as? UIWindowScene {
        let window = UIWindow(windowScene: windowScene)
        window.rootViewController = UIHostingController(rootView: ContentView())
        self.window = window
        window.makeKeyAndVisible()
    }

Answer 4

I am a newbie to the iOS app development. I was practising to develop iOS apps from the very beginning and while running a very basic Hello World app, I also faced same issue that only a black blank screen appears after building and running the app in iOS simulator. Somehow while struggling to find out a solution to the problem I accidentally clicked Window-->Scale-->50% in iOS simulator and it did solve my problem. I could then see the Home page with my app and clicking on app icon I was able to run my app successfully. App versions: Xcode 5.1 iOS Simulator: 7.1 OSX: 10.9.3

Answer 5

This could result from not setting the correct deployment info. (ie if your storyboard isn't set as the main interface)

Answer 6

重新启动计算机应该是您需要做的所有事情。

Answer 7

Another Solution is that if you are building UI programatically in Objective C project, then you might need to add some code to inflate the view, so you will need to add those 3 lines to make the window's interface interacts with the code (the outer 2 are actually interacting with the code and the other one will change the screen to white so you will know it works).

- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {

self.window = [[UIWindow alloc] initWithFrame: [[UIScreen mainScreen] bounds]];
// Override point for customization after application launch.

...

self.window.backgroundColor = [UIColor whiteColor];
[self.window makeKeyAndVisible];


return YES;
}

Answer 8

Solution 1 : You can Quit simulator and try again.

Solution 2 (Recommended) : Go to iOS Simulator -> Reset Content and Settings...

This will pop-up an alert stating 'Are you sure you want to reset the iOS Simulator content and settings?'

Select Reset if you wish to or else Don't Reset button.

Note that once you reset simulator content all app installed on simulator will be deleted and it will reset to initial settings.

Answer 9

If you should loose your entry point in your Storyboard or simply wish to change the entry point you can specify this in Interface Builder. To set a new entry point you must first decide which ViewController will act as the new entry point and in the Attribute Inspector select the Initial Scene checkbox.

You can try: http://www.scott-sherwood.com/ios-5-specifying-the-entry-point-of-your-storyboard/

Answer 10

I struggled with this for a couple of hours. Finally what solved it for me was:

sudo xcrun simctl erase all

xcrun simctl shutdown all

Answer 11

Please make sure you have done this,if you are getting black screen after copying the storyboard from another project

Answer 12

I fixed this issue by cleaning the project by pressing
cmd + shift + k
and exited my simulator and built again.

Answer 13

I solved this question with set window background color like this in iOS 13:

func scene(_ scene: UIScene, willConnectTo session: UISceneSession, options connectionOptions: UIScene.ConnectionOptions) {
    guard let _ = (scene as? UIWindowScene) else { return }
    if let windowScene = scene as? UIWindowScene {
        window = UIWindow(windowScene: windowScene)
        window?.backgroundColor = .white
        let storyBoard = UIStoryboard(name: "Main", bundle: nil)
        
        // workaround for svprogresshud
        let appDelegate = UIApplication.shared.delegate as! AppDelegate
        appDelegate.window = window
    }
}

Answer 14

I've managed to find the fix for this. It was found courtesy of this blog post:

http://vandadnp.wordpress.com/2012/03/18/xcode-4-3-1-cannot-attach-to-ios-simulator/

The solution is to press cmd+shift+, (command, shift and then comma ",").. that loads some options for release or debugging.

Change the debugger from LLDB to GDB. This fixes the issue.

Answer 15

To make sure it's a simulator issue, see if you can connect to the simulator with a brand new project without changing any code. Try the tab bar template.

If you think it's a simulator issue, press the iOS Simulator menu. Select "Reset Content and Settings...". Press "Reset."

I can't see your XIB and what @properties you have connected in Interface Builder, but it could also be that you're not loading your window, or that your window is not loading your view controller.

Answer 16

I had the same issue with Xcode... black screen on launching apps, no debugging and clicking would lock up Xcode.

I finally found the problem... following the lead that the simulator could not connect to Xcode I took a look at my etc/hosts file and found that months ago to solve a different issue I had edited the host file to map localhost to my fixed IP instead of the default... my value:

10.0.1.17 localhost

This should work since that is my IP, but changing it back to the default IP fixed Xcode...

127.0.0.1 localhost

Hope this helps.

Answer 17

I was doing what doug suggests ("Reset Content and Settings") which works but takes a lot of time and it is really annoying... until I recently found completely accidental another solution that is much quicker and seems to also work so far! Just hit cmd+L on your simulator or go to the simulator menu "Hardware -> Lock", which locks the screen, when you unlock the screen the app works like nothing ever happened :)

Answer 18

What happened with me was the Type of class was not UIViewController for the script attached to my view controller. It was for a UITabController..... I had mistakenly quickly created the wrong type of class.... So make sure the class if the correct type.. Hope this helps someone. I was in a rush and made this mistake.

Answer 19

只需单击 Simulator-> Reset Contents and Settings 即可重置您的模拟器。

Answer 20

你也可以去硬件->重启，然后硬件->主页，然后点击你的应用程序

Answer 21

确保设置了初始视图控制器

Answer 22

我只有在删除具有早期 iOS 版本的模拟器后才解决了这个问题。

Answer 23

I had black simulator screens only for iOS 11 sims. After trying to reset, reboot, reinstall and creating a brand new useraccount on my machine I found this solution:

defaults write com.apple.CoreSimulator.IndigoFramebufferServices FramebufferRendererHint 3

found in this answer here: Xcode 9 iOS Simulator becoming black screen after installing Xcode 10 beta

Answer 24

Please check for all the constraints for all the views and review complete storyboard. Usually this happens because of that.

Regards, Arora

Answer 25

In case you recently updated to Xcode 11 beta 3 and try to run an older SwiftUI project, you have to make some changes in the SceneDelegate where the views are loaded, otherwise the screens will remain black on devices running iOS 13 beta 3 which of course includes all simulators.

    func scene(_ scene: UIScene, willConnectTo session: UISceneSession, options connectionOptions: UIScene.ConnectionOptions) {
    // Use this method to optionally configure and attach the UIWindow `window` to the provided UIWindowScene `scene`.
    // If using a storyboard, the `window` property will automatically be initialized and attached to the scene.
    // This delegate does not imply the connecting scene or session are new (see `application:configurationForConnectingSceneSession` instead).

    // Use a UIHostingController as window root view controller
    if let windowScene = scene as? UIWindowScene {
        let window = UIWindow(windowScene: windowScene)
        window.rootViewController = UIHostingController(rootView: ContentView())
        self.window = window
        window.makeKeyAndVisible()
    }
}

The behavior not strictly limited to the simulators, but since most people will run beta software exclusively on simulators it will only occur in this context. It baffled me for quite a while, so hope it helps.

Answer 26

When i have carried my project on Xcode 11.1, i got that problem. That black screen problem may occur any presentation inter ViewControllers.

That answer helped me. Because modal presentation changed with iOS 13. If you don't get that problem before iOS 13, please try to add line below to your ViewController before its presentation;

viewController.modalPresentationStyle = .fullScreen

after your code may seem like below;

let vc = UIViewController()
vc.modalPresentationStyle = .fullScreen //or .overFullScreen for transparency
self.present(vc, animated: true, completion: nil)

Answer 27

I was developing flutter using android studio and running the simulator, the simulator was dark and I reset the contents as per accepted answer. But that didn't fix my issue. My CPU was running somehow high enough, so I restarted , but not fixed the issue. I opened Xcode and run one of my native iOS apps, the simulator re-opened as usual. I closed the Xcode and opened Android Studio, then started developing flutter app again.

Answer 28

This was my reason for having this issue.

For some reason, the "Is Initial View Controller" (for my main View Controller) was unchecked which was causing the black screen on load up.

Hope this helps someone out there!

Answer 29

I noticed I had accidentally deleted var window:UIWindow? line from AppDelegate. Introducing it again fixed the issue for me!

Answer 30

For me all it was needed was to shake the device ( Device > Shake ). Weird but worked for me. If this doesn't work try resetting ( Device > Erase All Content and Settings ) and then shake the device again.

Answer 31

Faced this issue in Dec 2021 with iOS 13.7 simulator after Macbook Air went to sleep. The simulator screen was black with no signs of life. Resetting the simulator didn't help. Closing all windows and restarting the laptop didn't help. Ultimately it turned out that syspolicyd was hogging 350% of the CPU. Killing this process solved the problem.

Answer 32

For me, the simulator that was crashing was iPhone 13 with iOS 15.2. None of the solutions worked.

The CPU usage of the process 'syspolicyd' shot up whenever this issue occurred as well, but killing the process didn't help either.

Changing the device to a different one (File > Open Simulator > iOS 15.2 > iPhone 13 Pro Max) fixed the issue. After that, I started the previous device (iPhone 13) again, and it worked too.

Answer 33

I was also getting the same problem but surprisingly what worked for me is

• Open Xcode & Go to the Preferences > Components
• Then, If you have not installed ios version then install from there (eg. iOS 15.2 that is required to run on iPhone 12 with iOS version 15.2)
• After finish installation, Then click "Check & Install Now" button
• Close the window & now run the simulator (for which you have installed version)

Answer 34

Check right path for info.plist in Project - Build Sittings

Put info.plist into search field, and find line “info.plist File”

This in case of you move your info file into another folder.

Answer 35

I've Xcode 13.2.1

What worked for me is on the Simulator Menu. Go to Device and Erase All Content and Settings...