[英]FLD floating-point instruction
根据http://cs.smith.edu/~thiebaut/ArtOfAssembly/CH14/CH14-4.html#HEADING4-5
14.4.4.1 FLD 指令
fld mem_32
fld mem_64[bx]
我的目标是将常量 10 存储到我的 fPU 堆栈中。 为什么我不能这样做?
__asm
{
move bx, 0x0004;
fld dword ptr[bx] or fld bx;
//-------
fld 0x004; //Since it is 32 bits?
fild 0x004;
}
这里至少有三件事可能会出错。 一是汇编器的语法。 二是指令集架构。 第三个是内存模型(16 位 vs 32 位,分段 vs 扁平)。 我怀疑所提供的示例是针对 16 位分段架构的,因为 8087 来自那个时代,但是 c++ 编译器主要是在 386+ 保护模式之后出现的。
8087 FPU 不支持在通用寄存器 (GPR) 和浮点堆栈之间移动数据的指令。 基本原理是浮点寄存器使用 32、64 或 80 位,而 GPR 只有 16 位宽。 取而代之的是从内存中间接移动数据。
示例fld myRealVar
预设已提供标签(具有宽度):
.data
myRealVar: .real8 1.113134241241
myFloat: .real4 1.1131313
myBigVar: .real10 1.1234567890123456
myInt: .word 10
myInt2: .word 0
myBytes: .byte 10 dup (0) ;// initializes 10 bytes of memory with zeros
.text
fld myRealVar; // accesses 8 bytes of memory
fild myInt; // access the memory as 16 bits
fild myBytes; // ## ERROR ## can't load 8-bits of data
fild dword ptr myBytes; // Should work, as the proper width is provided
首先请注意,这些示例假设数据属于一个段.data
并且已经用
mov ax, segment data; //
mov ds, ax
只有在那之后,内存位置0x0004
可能包含常量 10。我强烈怀疑该模型不适用于您的内联 C++ 系统。 同样在这里,汇编器必须足够聪明,才能将每个标签与提供的宽度相关联,并在指令中对其进行编码。
将整数加载到 FPU 的一种方法是使用堆栈:
push bp // save bp
mov ax, 10
push ax
mov bp, sp // use bp to point to stack
fld word ptr [bp]
pop ax // clean the stack and restore bp
pop bp
.. or ..
mov bx, 10
push bx
mov bx, sp
fld word ptr ss:[bx] // notice the segment override prefix ss
pop ax // clean the constant 10
在 32 位体系结构中,可以直接使用esp
指向堆栈顶部,这可能是您的 c++ 编译器的情况:
sub esp, 4
mov dword ptr [esp], 10 // store the integer 10 into stack
fild dword ptr [esp] // access the memory
add esp, 4 // undo the "push" operation
一些内联汇编器可能能够使用局部变量并自动用 ebp/esp 寄存器和正确的偏移量替换标签:
int f1 = 10;
void myfunc(float f2) {
double f = 10.0;
__asm {
fild f1 // encoded as fild dword ptr [xxx]
fld f // encoded as fld qword ptr [esp + xxx]
fld f2 // encoded as fld dword ptr [esp + xxx]
}
}
为清楚起见,请注意:BX 确实是一个 16 位寄存器。 它仍然存在,但 FLD 指令不支持它。 第一两行的语法应该是:
mov ebx, 4
fld ebx
当在 C/C++ 中内联时,编译器可能支持 __asm 语法。 上面的答案假设一个单独的 ASM 文件是用单独的汇编程序编译的。
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.