[英]copy bytes from one file to another in reverse order in C
在这里检查答案并在我的环境中运行它后,我发现代码仍然遇到与我的代码相同的问题。 这个问题是,每当我有一个与此类似的输入文件...
FILE A
|---------------------|
| ABCDE |
| abcde |
|---------------------|
我在目标文件中生成了额外的换行符空白。
FILE B
|---------------------|
| edcba |
| |
| EDCBA |
|---------------------|
调试代码后,我可以看到两次将\\ n复制到目标文件中,我想了解为什么lseek会这样做。
附件是我的代码。 有问题的关键部分在do / while循环中。 我非常确定我的思考过程是正确的,因为我从此答案中查找的代码将输出完全相同的结果。
#define CHAR_SIZE 2048
#define BUFF_SIZE 1
#define PERMS 0666
int main(int argc, char* argv[]){
if (argc < 3) {
return 1;
printf ("ERROR: not enough arguments\n");
}
int src_file = 0; int dest_file = 0;
int n = -1;
if((src_file=open(argv[1],O_RDONLY)) < -1) return 1;
if((dest_file = creat(argv[2], PERMS)) < -1) return 1;
printf ("The filesize is: %d\n", lseek(src_file, (off_t) 0, SEEK_END));
char buffer[BUFF_SIZE];
lseek (src_file,n--,SEEK_END);
do {
read(src_file,buffer,BUFF_SIZE);
printf ("%s", buffer);
write(dest_file,buffer,BUFF_SIZE);
}while (lseek (src_file,n--,SEEK_END) > -1);
printf("\n");
return 0;
}
您有许多问题。 你额外的换行符来自该POSIX的线端定义为一个事实newline
(虽然不是所有的文件符合)。 因此,要摆脱多余的换行符,您需要:
int n = -2;
代替
int n = -1;
(明确读取POSIX行尾并将其写入输出文件)
您的其他问题是您将不知道文件打开是否失败,因为您不正确地检查了返回值:
// if ((src_file = open (argv[1],O_RDONLY)) < -1) return 1;
// if ((dest_file = creat (argv[2], PERMS)) < -1) return 1;
失败时返回-1
。 因此,您需要:
if ((src_file = open (argv[1],O_RDONLY)) == -1) return 1;
if ((dest_file = creat (argv[2], PERMS)) == -1) return 1;
接下来,您的缓冲区将不包含字符串。 至少需要一个2-char
数组来保存1-char
以及nul-terminating
字符。 以下内容不起作用:
#define BUFF_SIZE 1
...
char buffer[BUFF_SIZE];
...
printf ("%s", buffer);
您已将一个非终止字符发送给printf
。 如果您在启用警告的情况下进行编译(例如-Wall -Wextra
),您会知道,因为编译器会警告您(即使没有适当的警告标志,也可能会警告您,具体取决于您的编译器)。 至少要完成上述工作,您需要:
#define BUFF_SIZE 2
并且必须在调用printf
之前确保您的nul-terminate buffer
。 您可以使用以下方法完成此操作:
char buffer[BUFF_SIZE] = "";
...
read (src_file, buffer, BUFF_SIZE - 1);
buffer[1] = 0;
printf ("%s", buffer);
write (dest_file, buffer, BUFF_SIZE - 1);
(您应该检查read
和write
的返回值,以验证您正在读取/写入您认为是的字节数...)
将更正放在一起(并显示您可以完全消除缓冲区,而只需将int
用作buf char)即可执行以下操作:
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define CHAR_SIZE 2048
#define BUFF_SIZE 2
#define PERMS 0666
int main(int argc, char **argv) {
if (argc < 3) {
return 1;
printf ("ERROR: not enough arguments\n");
}
int src_file = 0;
int dest_file = 0;
int n = -2;
int nl = '\n'; /* explicit newline when writing in reverse */
// if ((src_file = open (argv[1],O_RDONLY)) < -1) return 1;
// if ((dest_file = creat (argv[2], PERMS)) < -1) return 1;
if ((src_file = open (argv[1],O_RDONLY)) == -1) return 1;
if ((dest_file = creat (argv[2], PERMS)) == -1) return 1;
printf ("The filesize is: %ld\n", lseek(src_file, (off_t) 0, SEEK_END));
lseek (src_file, n--, SEEK_END);
#ifdef WBUFCHAR
int bufchar;
do { /* validate both read and write */
if (read (src_file, &bufchar, BUFF_SIZE - 1) == 0) {
fprintf (stderr, "error: read failure.\n");
return 1;
}
putchar (bufchar);
if (write (dest_file, &bufchar, BUFF_SIZE - 1) == 0) {
fprintf (stderr, "error: write failure.\n");
return 1;
}
} while (lseek (src_file, n--, SEEK_END) > -1);
#else
char buffer[BUFF_SIZE];
do { /* validate both read and write */
if (read (src_file, buffer, BUFF_SIZE - 1) == 0) {
fprintf (stderr, "error: read failure.\n");
return 1;
}
buffer[1] = 0; /* nul-terminate */
printf ("%s", buffer);
if (write (dest_file, buffer, BUFF_SIZE - 1) == 0) {
fprintf (stderr, "error: write failure.\n");
return 1;
}
} while (lseek (src_file, n--, SEEK_END) > -1);
#endif
/* explicity write the newline you removed earlier */
if (write (dest_file, &nl, BUFF_SIZE - 1) == 0) {
fprintf (stderr, "error: write failure.\n");
return 1;
}
putchar ('\n');
return 0;
}
注意:可以正常编译以使用您的buffer
。 用-DWBUFCHAR
编译以使用bufchar
代码。
编译和输出示例
$ cat testabcde.txt
ABCDE
abcde
$ gcc -Wall -Wextra -Ofast -o bin/extranl extranl.c
$ ./bin/extranl testabcde.txt testrev.txt
The filesize is: 12
edcba
EDCBA
$ cat testrev.txt
edcba
EDCBA
$ gcc -Wall -Wextra -Ofast -DWBUFCHAR -o bin/extranlwbc extranl.c
$ ./bin/extranlwbc testabcde.txt testrevwbc.txt
The filesize is: 12
edcba
EDCBA
$ cat testrevwbc.txt
edcba
EDCBA
试试看,如果您还有其他问题,请告诉我。
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#define CHAR_SIZE 2048
#define BUFF_SIZE 1
#define PERMS 0666
int main(int argc, char* argv[]){
if (argc < 3) {
printf ("ERROR: not enough arguments\n");
return 1;
}
int src_file = 0; int dest_file = 0;
int n = -1;
if((src_file=open(argv[1],O_RDONLY)) == -1) return 1;
if((dest_file = creat(argv[2], PERMS)) == -1) return 1;
printf ("The filesize is: %d\n", lseek(src_file, (off_t) 0, SEEK_END));
char buffer[BUFF_SIZE];
lseek (src_file,n--,SEEK_END);
do {
read(src_file,buffer,BUFF_SIZE);
printf("%02x\n", *buffer);
if (*buffer == '\n')
n--;
write(dest_file,buffer,BUFF_SIZE);
}while (lseek (src_file,n--,SEEK_END) > -1);
printf("\n");
return 0;
}
该解决方案是修复输出文件中多余的换行符(\\ n \\ n)的最佳方法。
通过将这部分添加到do / while循环中,我可以补偿添加的\\ n。
if (*buffer == '\n')
n--;
声明:本站的技术帖子网页,遵循CC BY-SA 4.0协议,如果您需要转载,请注明本站网址或者原文地址。任何问题请咨询:yoyou2525@163.com.