Linux读、写Arduino串口

Question

我正在尝试从 C++ 程序写入 Arduino 串行。 如何在 C++ 程序中设置波特率？ 当 arduino 设置为 9600 时，通信似乎有效，但是当我按预期更改它时失败。（所以 9600 是默认值？）使用命令查看输出： screen /dev/ttyUSBx 115200 Using an example program to在 Arduino 上回显一切：

* serial_echo.pde
* ----------------- 
* Echoes what is sent back through the serial port.
*
* http://spacetinkerer.blogspot.com
*/

int incomingByte = 0;    // for incoming serial data

void setup() {
  Serial.begin(115200);    // opens serial port, sets data rate to 9600 bps
}
void loop() {
  // send data only when you receive data:
  if (Serial.available() > 0) ;
  // read the incoming byte:
  incomingByte = Serial.read();
  // say what you got:
  Serial.print((char)incomingByte);
}

C++ 代码是：

#include <iostream>
#include <stdio.h>
#include <string>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>

using namespace std;

string comArduino(string outmsg = " hello"){

  #define comports_size 3

  static int fd_ard;
  static bool init = false;
  //char buffer[256];

  if(!init){
      string comports[] = { "/dev/ttyUSB0","/dev/ttyUSB1","/dev/ttyUSB2" };
      for(int i = 0; i < comports_size; i++){

          fd_ard = open(comports[i].c_str(), O_RDWR | O_NOCTTY | O_NDELAY);
          if (fd_ard != -1) {
              cout<<"connected to "<<comports[i]<<endl;
              init = true;
              break;
          }
          else{
              perror ("open");
          }
          if(i == (comports_size - 1)){
              cout<<"can't connect to arduino [ ER ]\n"<<endl;
              return "";
          }
      }
  }
  int Er = write(fd_ard,outmsg.c_str(),strlen(outmsg.c_str()));
  if(Er < strlen(outmsg.c_str())){
      perror ("write ");
      init = false;
  }
  else
      cout<<"write ok"<<endl;
  return "";
}
int main(){
  while(1){
      comArduino();
      sleep(1);
  }
}

编辑：需要在open()之后添加以下几行以正确配置串行：

    struct termios PortConf;
    // write port configuration, as ' stty -F /dev/ttyUSB0 -a ' returned after opening the port with the arduino IDE.
    tcgetattr(fd_ard, &PortConf);                           // Get the current attributes of the Serial port
    PortConf.c_cflag = 0;                                 //set cflag
    PortConf.c_cflag |= (CS8 | HUPCL | CREAD | CLOCAL);

    PortConf.c_iflag = 0;                                 //set iflag
    //PortConf.c_iflag &= ~(ISIG | ICANON | IEXTEN);

    PortConf.c_oflag = 0;                                 //set oflag
    PortConf.c_oflag |= (ONLCR | CR0 | TAB0 | BS0 | VT0 | FF0); //NR0 is supposed to be set, but won't compile
    //PortConf.c_oflag &= ~(OPOST);

    PortConf.c_lflag = 0;                                 //set lflag
    //PortConf.c_lflag &= ~(ECHO | ECHOE);

    PortConf.c_cc[VMIN]  = 0;
    PortConf.c_cc[VTIME] = 0;

    cfsetispeed(&PortConf,B115200);                       // Set Read  Speed as 115200                       
    cfsetospeed(&PortConf,B115200);                       // Set Write Speed as 115200 

    if((tcsetattr(fd_ard,TCSANOW,&PortConf)) != 0){       // Set the attributes to the termios structure
        printf("Error while setting attributes \n");
        return "";
    }

Answer 1

您需要使用 termios 结构设置正在使用的任何端口的波特率。

使用“man termios”获取有关 termios 结构的更多信息

所以一开始需要添加

#include <termios.h> 

到你的代码的顶部。

稍后当您打开端口时：

fd_ard = open(comports[i].c_str(), O_RDWR | O_NOCTTY | O_NDELAY);

您需要访问 termios 结构并对其进行修改以满足您的需要

struct termios SerialPortSettings;  // Create the structure                          
tcgetattr(fd_ard, &SerialPortSettings); // Get the current attributes of the Serial port

然后，设置波特率

cfsetispeed(&SerialPortSettings,B115200); // Set Read  Speed as 115200                       
cfsetospeed(&SerialPortSettings,B115200); // Set Write Speed as 115200                       

然后提交更改

if((tcsetattr(fd_ard,TCSANOW,&SerialPortSettings)) != 0) // Set the attributes to the termios structure
  printf("Error while setting attributes \n");

还有很多其他的东西可以设置为流量控制、规范模式等，它们可能会影响数据的发送和接收方式。 参考手册页，或者参考通用终端接口的 这个描述