Windows 10 和 Windows IOT 核心之間的 TCP 通信

Question

我無法弄清楚是什么阻止了 Windows 10 IOT Core 和 Windows 10 機器之間的通信。 我的設置如下，1）NXP imx6 安裝了 Windows 10 IOT 2）我的開發沙箱安裝了 Windows 10 3）兩台機器在同一個子網中

在 Windows 10 IOT 核心上安裝了一個 TCP 端口轉發 UWP 應用程序（按原樣復制代碼並定制以使其成為 UWP 應用程序，參考來自下面提供的 Git 中心）。

https://gist.github.com/bongbongco/588abf3928cbd297443dd9da8171eb9a

該應用程序在 Windows 10 IOT 上成功運行，但無法接受來自我的 Windows 10 機器的客戶端連接請求。 該應用程序在以下代碼行中繼續等待客戶端連接

源 = _mainSocket.Accept();

從我的客戶端機器（Windows 10 開發機器），當我嘗試連接到 Windows 10 IOT 核心時，我收到連接超時異常。

我正在嘗試將 8081 telnet 到安裝了 Windows 10 IOT Core 的 iMX6 板，但出現錯誤“無法打開與主機的連接，在端口 8081：連接失敗”

當我 ping 到 iMX6 機器時，我得到回復，我的問題是，IOT 核心是否打開了特定端口？

或者我們需要啟用一些防火牆設置？ 如果是如何啟用。

我已經從恩智浦“W1860_1_0_1_EVK_iMX6ULL_512MB_TestOEMInput-xml-Release.ffu”安裝了以下圖像

讓我知道您的想法可能是什么問題。
有沒有人有在 UWP 中開發的工作端口轉發應用程序？

我的一些觀察 1) 我可以 ping 到我的 Windows 10 IOT 核心 2) 我可以在 Windows 10 IOT 核心上安裝和管理應用程序 3) 在通過 Visual Studio 遠程調試應用程序時，安裝了所有依賴的框架庫

思考我的幾個問題 1) 是否可以使用 TCP 協議在 Windows 10 和 Windows 10 IOT 之間進行通信 2) 我是否缺少 Windows 10 IOT 上的任何庫

我的服務器程序如下

/// <summary>
/// TCP server is used to connect, disconnect and manage TCP sessions
/// </summary>
/// <remarks>Thread-safe</remarks>
public class TcpServer : IDisposable
{
    /// <summary>
    /// Initialize TCP server with a given IP address and port number
    /// </summary>
    /// <param name="address">IP address</param>
    /// <param name="port">Port number</param>
    public TcpServer(IPAddress address, int port) : this(new IPEndPoint(address, port)) {}
    /// <summary>
    /// Initialize TCP server with a given IP address and port number
    /// </summary>
    /// <param name="address">IP address</param>
    /// <param name="port">Port number</param>
    public TcpServer(string address, int port) : this(new IPEndPoint(IPAddress.Parse(address), port)) {}
    /// <summary>
    /// Initialize TCP server with a given IP endpoint
    /// </summary>
    /// <param name="endpoint">IP endpoint</param>
    public TcpServer(IPEndPoint endpoint)
    {
        Id = Guid.NewGuid();
        Endpoint = endpoint;
    }

    /// <summary>
    /// Server Id
    /// </summary>
    public Guid Id { get; }

    /// <summary>
    /// IP endpoint
    /// </summary>
    public IPEndPoint Endpoint { get; private set; }

    /// <summary>
    /// Number of sessions connected to the server
    /// </summary>
    public long ConnectedSessions { get { return Sessions.Count; } }
    /// <summary>
    /// Number of bytes pending sent by the server
    /// </summary>
    public long BytesPending { get { return _bytesPending; } }
    /// <summary>
    /// Number of bytes sent by the server
    /// </summary>
    public long BytesSent { get { return _bytesSent; } }
    /// <summary>
    /// Number of bytes received by the server
    /// </summary>
    public long BytesReceived { get { return _bytesReceived; } }

    /// <summary>
    /// Option: acceptor backlog size
    /// </summary>
    /// <remarks>
    /// This option will set the listening socket's backlog size
    /// </remarks>
    public int OptionAcceptorBacklog { get; set; } = 1024;
    /// <summary>
    /// Option: keep alive
    /// </summary>
    /// <remarks>
    /// This option will setup SO_KEEPALIVE if the OS support this feature
    /// </remarks>
    public bool OptionKeepAlive { get; set; }
    /// <summary>
    /// Option: no delay
    /// </summary>
    /// <remarks>
    /// This option will enable/disable Nagle's algorithm for TCP protocol
    /// </remarks>
    public bool OptionNoDelay { get; set; }
    /// <summary>
    /// Option: reuse address
    /// </summary>
    /// <remarks>
    /// This option will enable/disable SO_REUSEADDR if the OS support this feature
    /// </remarks>
    public bool OptionReuseAddress { get; set; }
    /// <summary>
    /// Option: enables a socket to be bound for exclusive access
    /// </summary>
    /// <remarks>
    /// This option will enable/disable SO_EXCLUSIVEADDRUSE if the OS support this feature
    /// </remarks>
    public bool OptionExclusiveAddressUse { get; set; }

    #region Start/Stop server

    // Server acceptor
    private Socket _acceptorSocket;
    private SocketAsyncEventArgs _acceptorEventArg;

    // Server statistic
    internal long _bytesPending;
    internal long _bytesSent;
    internal long _bytesReceived;

    /// <summary>
    /// Is the server started?
    /// </summary>
    public bool IsStarted { get; private set; }
    /// <summary>
    /// Is the server accepting new clients?
    /// </summary>
    public bool IsAccepting { get; private set; }

    /// <summary>
    /// Start the server
    /// </summary>
    /// <returns>'true' if the server was successfully started, 'false' if the server failed to start</returns>
    public virtual bool Start()
    {
        Debug.Assert(!IsStarted, "TCP server is already started!");
        if (IsStarted)
            return false;

        // Setup acceptor event arg
        _acceptorEventArg = new SocketAsyncEventArgs();
        _acceptorEventArg.Completed += OnAsyncCompleted;

        // Create a new acceptor socket
        _acceptorSocket = new Socket(Endpoint.AddressFamily, SocketType.Stream, ProtocolType.Tcp);

        // Apply the option: reuse address
        _acceptorSocket.SetSocketOption(SocketOptionLevel.Socket, SocketOptionName.ReuseAddress, OptionReuseAddress);
        // Apply the option: exclusive address use
        _acceptorSocket.SetSocketOption(SocketOptionLevel.Socket, SocketOptionName.ExclusiveAddressUse, OptionExclusiveAddressUse);

        // Bind the acceptor socket to the IP endpoint
        _acceptorSocket.Bind(Endpoint);
        // Refresh the endpoint property based on the actual endpoint created
        Endpoint = (IPEndPoint)_acceptorSocket.LocalEndPoint;
        // Start listen to the acceptor socket with the given accepting backlog size
        _acceptorSocket.Listen(OptionAcceptorBacklog);

        // Reset statistic
        _bytesPending = 0;
        _bytesSent = 0;
        _bytesReceived = 0;

        // Update the started flag
        IsStarted = true;

        // Call the server started handler
        OnStarted();

        // Perform the first server accept
        IsAccepting = true;
        StartAccept(_acceptorEventArg);

        return true;
    }

    /// <summary>
    /// Stop the server
    /// </summary>
    /// <returns>'true' if the server was successfully stopped, 'false' if the server is already stopped</returns>
    public virtual bool Stop()
    {
        Debug.Assert(IsStarted, "TCP server is not started!");
        if (!IsStarted)
            return false;

        // Stop accepting new clients
        IsAccepting = false;

        // Reset acceptor event arg
        _acceptorEventArg.Completed -= OnAsyncCompleted;

        // Close the acceptor socket
        _acceptorSocket.Close();

        // Dispose the acceptor socket
        _acceptorSocket.Dispose();

        // Disconnect all sessions
        DisconnectAll();

        // Update the started flag
        IsStarted = false;

        // Call the server stopped handler
        OnStopped();

        return true;
    }

    /// <summary>
    /// Restart the server
    /// </summary>
    /// <returns>'true' if the server was successfully restarted, 'false' if the server failed to restart</returns>
    public virtual bool Restart()
    {
        if (!Stop())
            return false;

        while (IsStarted)
            Thread.Yield();

        return Start();
    }

    #endregion

    #region Accepting clients

    /// <summary>
    /// Start accept a new client connection
    /// </summary>
    private void StartAccept(SocketAsyncEventArgs e)
    {
        // Socket must be cleared since the context object is being reused
        e.AcceptSocket = null;

        // Async accept a new client connection
        if (!_acceptorSocket.AcceptAsync(e))
            ProcessAccept(e);
    }

    /// <summary>
    /// Process accepted client connection
    /// </summary>
    private void ProcessAccept(SocketAsyncEventArgs e)
    {
        if (e.SocketError == SocketError.Success)
        {
            // Create a new session to register
            var session = CreateSession();

            // Register the session
            RegisterSession(session);

            // Connect new session
            session.Connect(e.AcceptSocket);
        }
        else
            SendError(e.SocketError);

        // Accept the next client connection
        if (IsAccepting)
            StartAccept(e);
    }

    /// <summary>
    /// This method is the callback method associated with Socket.AcceptAsync()
    /// operations and is invoked when an accept operation is complete
    /// </summary>
    private void OnAsyncCompleted(object sender, SocketAsyncEventArgs e)
    {
        ProcessAccept(e);
    }

    #endregion

    #region Session factory

    /// <summary>
    /// Create TCP session factory method
    /// </summary>
    /// <returns>TCP session</returns>
    protected virtual TcpSession CreateSession() { return new TcpSession(this); }

    #endregion

    #region Session management

    // Server sessions
    protected readonly ConcurrentDictionary<Guid, TcpSession> Sessions = new ConcurrentDictionary<Guid, TcpSession>();

    /// <summary>
    /// Disconnect all connected sessions
    /// </summary>
    /// <returns>'true' if all sessions were successfully disconnected, 'false' if the server is not started</returns>
    public virtual bool DisconnectAll()
    {
        if (!IsStarted)
            return false;

        // Disconnect all sessions
        foreach (var session in Sessions.Values)
            session.Disconnect();

        return true;
    }

    /// <summary>
    /// Find a session with a given Id
    /// </summary>
    /// <param name="id">Session Id</param>
    /// <returns>Session with a given Id or null if the session it not connected</returns>
    public TcpSession FindSession(Guid id)
    {
        // Try to find the required session
        return Sessions.TryGetValue(id, out TcpSession result) ? result : null;
    }

    /// <summary>
    /// Register a new session
    /// </summary>
    /// <param name="session">Session to register</param>
    internal void RegisterSession(TcpSession session)
    {
        // Register a new session
        Sessions.TryAdd(session.Id, session);
    }

    /// <summary>
    /// Unregister session by Id
    /// </summary>
    /// <param name="id">Session Id</param>
    internal void UnregisterSession(Guid id)
    {
        // Unregister session by Id
        Sessions.TryRemove(id, out TcpSession temp);
    }

    #endregion

    #region Multicasting

    /// <summary>
    /// Multicast data to all connected sessions
    /// </summary>
    /// <param name="buffer">Buffer to multicast</param>
    /// <returns>'true' if the data was successfully multicasted, 'false' if the data was not multicasted</returns>
    public virtual bool Multicast(byte[] buffer) { return Multicast(buffer, 0, buffer.Length); }

    /// <summary>
    /// Multicast data to all connected clients
    /// </summary>
    /// <param name="buffer">Buffer to multicast</param>
    /// <param name="offset">Buffer offset</param>
    /// <param name="size">Buffer size</param>
    /// <returns>'true' if the data was successfully multicasted, 'false' if the data was not multicasted</returns>
    public virtual bool Multicast(byte[] buffer, long offset, long size)
    {
        if (!IsStarted)
            return false;

        if (size == 0)
            return true;

        // Multicast data to all sessions
        foreach (var session in Sessions.Values)
            session.SendAsync(buffer, offset, size);

        return true;
    }

    /// <summary>
    /// Multicast text to all connected clients
    /// </summary>
    /// <param name="text">Text string to multicast</param>
    /// <returns>'true' if the text was successfully multicasted, 'false' if the text was not multicasted</returns>
    public virtual bool Multicast(string text) { return Multicast(Encoding.UTF8.GetBytes(text)); }

    #endregion

    #region Server handlers

    /// <summary>
    /// Handle server started notification
    /// </summary>
    protected virtual void OnStarted() {}
    /// <summary>
    /// Handle server stopped notification
    /// </summary>
    protected virtual void OnStopped() {}

    /// <summary>
    /// Handle session connected notification
    /// </summary>
    /// <param name="session">Connected session</param>
    protected virtual void OnConnected(TcpSession session) {}
    /// <summary>
    /// Handle session disconnected notification
    /// </summary>
    /// <param name="session">Disconnected session</param>
    protected virtual void OnDisconnected(TcpSession session) {}

    /// <summary>
    /// Handle error notification
    /// </summary>
    /// <param name="error">Socket error code</param>
    protected virtual void OnError(SocketError error) {}

    internal void OnConnectedInternal(TcpSession session) { OnConnected(session); }
    internal void OnDisconnectedInternal(TcpSession session) { OnDisconnected(session); }

    #endregion

    #region Error handling

    /// <summary>
    /// Send error notification
    /// </summary>
    /// <param name="error">Socket error code</param>
    private void SendError(SocketError error)
    {
        // Skip disconnect errors
        if ((error == SocketError.ConnectionAborted) ||
            (error == SocketError.ConnectionRefused) ||
            (error == SocketError.ConnectionReset) ||
            (error == SocketError.OperationAborted) ||
            (error == SocketError.Shutdown))
            return;

        OnError(error);
    }

    #endregion

    #region IDisposable implementation

    // Disposed flag.
    private bool _disposed;

    // Implement IDisposable.
    public void Dispose()
    {
        Dispose(true);
        GC.SuppressFinalize(this);
    }

    protected virtual void Dispose(bool disposingManagedResources)
    {
        // The idea here is that Dispose(Boolean) knows whether it is
        // being called to do explicit cleanup (the Boolean is true)
        // versus being called due to a garbage collection (the Boolean
        // is false). This distinction is useful because, when being
        // disposed explicitly, the Dispose(Boolean) method can safely
        // execute code using reference type fields that refer to other
        // objects knowing for sure that these other objects have not been
        // finalized or disposed of yet. When the Boolean is false,
        // the Dispose(Boolean) method should not execute code that
        // refer to reference type fields because those objects may
        // have already been finalized."

        if (!_disposed)
        {
            if (disposingManagedResources)
            {
                // Dispose managed resources here...
                Stop();
            }

            // Dispose unmanaged resources here...

            // Set large fields to null here...

            // Mark as disposed.
            _disposed = true;
        }
    }

    // Use C# destructor syntax for finalization code.
    ~TcpServer()
    {
        // Simply call Dispose(false).
        Dispose(false);
    }

    #endregion
}

我的主程序：

public class Program
{

    static void Main(string[] args)
    {
        // TCP server port
        int port = 1111;
        if (args.Length > 0)
            port = int.Parse(args[0]);

        Console.WriteLine($"TCP server port: {port}");

        Console.WriteLine();

        // Create a new TCP chat server
        var server = new TcpServer(IPAddress.Any, port);

        // Start the server
        Console.Write("Server starting...");
        server.Start();
        Console.WriteLine("Done!");

        Console.WriteLine("Press Enter to stop the server or '!' to restart the server...");

        // Perform text input
        for (; ; )
        {
            string line = Console.ReadLine();
            if (string.IsNullOrEmpty(line))
                break;

            // Restart the server
            if (line == "!")
            {
                Console.Write("Server restarting...");
                server.Restart();
                Console.WriteLine("Done!");
                continue;
            }

            // Multicast admin message to all sessions
            line = "(admin) " + line;
            server.Multicast(line);
        }

        // Stop the server
        Console.Write("Server stopping...");
        server.Stop();
        Console.WriteLine("Done!");
    }
}

謝謝

Answer 1

是的，可以使用 TCP 協議在 Windows 10 和 Windows 10 IoT Core 之間進行通信。 您需要執行以下兩個步驟：

1. 通過此命令在服務器設備上的防火牆設置中指定端口。

   netsh advfirewall firewall add rule name="Web Access" dir=in protocol=TCP localport=8081 action=Allow

2. 在 UWP 應用中添加privateNetworkClientServer功能。 您可以參考此文檔（ https://docs.microsoft.com/en-us/windows/uwp/networking/sockets#build-a-basic-tcp-socket-client-and-server ）。