pip 安裝枕頭在 windows 上不起作用 11
[英]pip install pillow doesn't work on windows 11
問題描述
我正在嘗試使用枕頭 package 但它不想安裝。 它適用於我的 windows 10 機器，但我需要它在我的另一台機器上工作，也就是 windows 11。 我的 pip 版本在兩台機器上都是相同的：22.2.2，我嘗試升級 pip，它沒有幫助。 我嘗試重新安裝 python 但發現有些奇怪。 當我輸入python --version時，我當前的 python 版本是 3.8.7，我不知道為什么。 I uninstalled python via controll panel, there is no python visible in the list in controll panel anymore, where does this python come from and how do I get rid of it so that I can use python 3.10? 而且這樣也能解決不能安裝pipllow的問題嗎？ 這是我在嘗試python -m pip install pillow時收到的完整錯誤消息
WARNING: Ignoring invalid distribution -ip (c:\msys64\mingw64\lib\python3.8\site-packages)
WARNING: Ignoring invalid distribution -ip (c:\msys64\mingw64\lib\python3.8\site-packages)
Collecting pillow
Using cached Pillow-9.2.0.tar.gz (50.0 MB)
Preparing metadata (setup.py) ... done
Building wheels for collected packages: pillow
Building wheel for pillow (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [181 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.mingw-3.8
creating build\lib.mingw-3.8\PIL
copying src\PIL\BdfFontFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\BlpImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\BmpImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\BufrStubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ContainerIO.py -> build\lib.mingw-3.8\PIL
copying src\PIL\CurImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\DcxImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\DdsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\EpsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ExifTags.py -> build\lib.mingw-3.8\PIL
copying src\PIL\features.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FitsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FitsStubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FliImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FontFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FpxImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FtexImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GbrImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GdImageFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GifImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GimpGradientFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GimpPaletteFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GribStubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\Hdf5StubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\IcnsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\IcoImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\Image.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageChops.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageCms.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageColor.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageDraw.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageDraw2.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageEnhance.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageFilter.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageFont.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageGrab.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageMath.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageMode.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageMorph.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageOps.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImagePalette.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImagePath.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageQt.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageSequence.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageShow.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageStat.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageTk.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageTransform.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageWin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImtImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\IptcImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\Jpeg2KImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\JpegImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\JpegPresets.py -> build\lib.mingw-3.8\PIL
copying src\PIL\McIdasImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MicImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MpegImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MpoImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MspImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PaletteFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PalmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PcdImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PcfFontFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PcxImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PdfImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PdfParser.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PixarImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PngImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PpmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PsdImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PSDraw.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PyAccess.py -> build\lib.mingw-3.8\PIL
copying src\PIL\SgiImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\SpiderImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\SunImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TarIO.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TgaImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TiffImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TiffTags.py -> build\lib.mingw-3.8\PIL
copying src\PIL\WalImageFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\WebPImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\WmfImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\XbmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\XpmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\XVThumbImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_binary.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_deprecate.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_tkinter_finder.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_util.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_version.py -> build\lib.mingw-3.8\PIL
copying src\PIL\__init__.py -> build\lib.mingw-3.8\PIL
copying src\PIL\__main__.py -> build\lib.mingw-3.8\PIL
running egg_info
writing src\Pillow.egg-info\PKG-INFO
writing dependency_links to src\Pillow.egg-info\dependency_links.txt
writing requirements to src\Pillow.egg-info\requires.txt
writing top-level names to src\Pillow.egg-info\top_level.txt
reading manifest file 'src\Pillow.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no files found matching '*.c'
warning: no files found matching '*.h'
warning: no files found matching '*.sh'
warning: no files found matching '*.txt'
warning: no previously-included files found matching '.appveyor.yml'
warning: no previously-included files found matching '.clang-format'
warning: no previously-included files found matching '.coveragerc'
warning: no previously-included files found matching '.editorconfig'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching 'codecov.yml'
warning: no previously-included files matching '.git*' found anywhere in distribution
warning: no previously-included files matching '*.pyc' found anywhere in distribution
warning: no previously-included files matching '*.so' found anywhere in distribution
no previously-included directories found matching '.ci'
adding license file 'LICENSE'
writing manifest file 'src\Pillow.egg-info\SOURCES.txt'
running build_ext
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
Traceback (most recent call last):
File "C:\Users\sofie\AppData\Local\Temp\pip-install-43p29232\pillow_96fe495f59934c0c8237da68ac991778\setup.py", line 995, in <module>
setup(
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\__init__.py", line 155, in setup
return distutils.core.setup(**attrs)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\core.py", line 148, in setup
return run_commands(dist)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\core.py", line 163, in run_commands
dist.run_commands()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 967, in run_commands
self.run_command(cmd)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 986, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.8\site-packages\wheel\bdist_wheel.py", line 299, in run
self.run_command('build')
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 986, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\command\build.py", line 135, in run
self.run_command(cmd_name)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 986, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\command\build_ext.py", line 79, in run
_build_ext.run(self)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\command\build_ext.py", line 339, in run
self.build_extensions()
File "C:\Users\sofie\AppData\Local\Temp\pip-install-43p29232\pillow_96fe495f59934c0c8237da68ac991778\setup.py", line 810, in build_extensions
raise RequiredDependencyException(f)
__main__.RequiredDependencyException: zlib
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\sofie\AppData\Local\Temp\pip-install-43p29232\pillow_96fe495f59934c0c8237da68ac991778\setup.py", line 1015, in <module>
raise RequiredDependencyException(msg)
__main__.RequiredDependencyException:
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pillow
Running setup.py clean for pillow
Failed to build pillow
WARNING: Ignoring invalid distribution -ip (c:\msys64\mingw64\lib\python3.8\site-packages)
Installing collected packages: pillow
Running setup.py install for pillow ... error
error: subprocess-exited-with-error
× Running setup.py install for pillow did not run successfully.
│ exit code: 1
╰─> [185 lines of output]
running install
C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_py
creating build
creating build\lib.mingw-3.8
creating build\lib.mingw-3.8\PIL
copying src\PIL\BdfFontFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\BlpImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\BmpImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\BufrStubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ContainerIO.py -> build\lib.mingw-3.8\PIL
copying src\PIL\CurImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\DcxImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\DdsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\EpsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ExifTags.py -> build\lib.mingw-3.8\PIL
copying src\PIL\features.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FitsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FitsStubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FliImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FontFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FpxImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\FtexImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GbrImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GdImageFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GifImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GimpGradientFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GimpPaletteFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\GribStubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\Hdf5StubImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\IcnsImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\IcoImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\Image.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageChops.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageCms.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageColor.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageDraw.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageDraw2.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageEnhance.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageFilter.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageFont.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageGrab.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageMath.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageMode.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageMorph.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageOps.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImagePalette.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImagePath.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageQt.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageSequence.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageShow.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageStat.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageTk.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageTransform.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImageWin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\ImtImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\IptcImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\Jpeg2KImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\JpegImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\JpegPresets.py -> build\lib.mingw-3.8\PIL
copying src\PIL\McIdasImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MicImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MpegImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MpoImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\MspImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PaletteFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PalmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PcdImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PcfFontFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PcxImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PdfImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PdfParser.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PixarImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PngImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PpmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PsdImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PSDraw.py -> build\lib.mingw-3.8\PIL
copying src\PIL\PyAccess.py -> build\lib.mingw-3.8\PIL
copying src\PIL\SgiImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\SpiderImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\SunImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TarIO.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TgaImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TiffImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\TiffTags.py -> build\lib.mingw-3.8\PIL
copying src\PIL\WalImageFile.py -> build\lib.mingw-3.8\PIL
copying src\PIL\WebPImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\WmfImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\XbmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\XpmImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\XVThumbImagePlugin.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_binary.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_deprecate.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_tkinter_finder.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_util.py -> build\lib.mingw-3.8\PIL
copying src\PIL\_version.py -> build\lib.mingw-3.8\PIL
copying src\PIL\__init__.py -> build\lib.mingw-3.8\PIL
copying src\PIL\__main__.py -> build\lib.mingw-3.8\PIL
running egg_info
writing src\Pillow.egg-info\PKG-INFO
writing dependency_links to src\Pillow.egg-info\dependency_links.txt
writing requirements to src\Pillow.egg-info\requires.txt
writing top-level names to src\Pillow.egg-info\top_level.txt
reading manifest file 'src\Pillow.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no files found matching '*.c'
warning: no files found matching '*.h'
warning: no files found matching '*.sh'
warning: no files found matching '*.txt'
warning: no previously-included files found matching '.appveyor.yml'
warning: no previously-included files found matching '.clang-format'
warning: no previously-included files found matching '.coveragerc'
warning: no previously-included files found matching '.editorconfig'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching 'codecov.yml'
warning: no previously-included files matching '.git*' found anywhere in distribution
warning: no previously-included files matching '*.pyc' found anywhere in distribution
warning: no previously-included files matching '*.so' found anywhere in distribution
no previously-included directories found matching '.ci'
adding license file 'LICENSE'
writing manifest file 'src\Pillow.egg-info\SOURCES.txt'
running build_ext
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
Traceback (most recent call last):
File "C:\Users\sofie\AppData\Local\Temp\pip-install-43p29232\pillow_96fe495f59934c0c8237da68ac991778\setup.py", line 995, in <module>
setup(
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\__init__.py", line 155, in setup
return distutils.core.setup(**attrs)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\core.py", line 148, in setup
return run_commands(dist)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\core.py", line 163, in run_commands
dist.run_commands()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 967, in run_commands
self.run_command(cmd)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 986, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\command\install.py", line 68, in run
return orig.install.run(self)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\command\install.py", line 670, in run
self.run_command('build')
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 986, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\command\build.py", line 135, in run
self.run_command(cmd_name)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\dist.py", line 986, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\command\build_ext.py", line 79, in run
_build_ext.run(self)
File "C:\msys64\mingw64\lib\python3.8\site-packages\setuptools\_distutils\command\build_ext.py", line 339, in run
self.build_extensions()
File "C:\Users\sofie\AppData\Local\Temp\pip-install-43p29232\pillow_96fe495f59934c0c8237da68ac991778\setup.py", line 810, in build_extensions
raise RequiredDependencyException(f)
__main__.RequiredDependencyException: zlib
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\sofie\AppData\Local\Temp\pip-install-43p29232\pillow_96fe495f59934c0c8237da68ac991778\setup.py", line 1015, in <module>
raise RequiredDependencyException(msg)
__main__.RequiredDependencyException:
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> pillow
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
WARNING: Ignoring invalid distribution -ip (c:\msys64\mingw64\lib\python3.8\site-packages)
WARNING: Ignoring invalid distribution -ip (c:\msys64\mingw64\lib\python3.8\site-packages)
WARNING: Ignoring invalid distribution -ip (c:\msys64\mingw64\lib\python3.8\site-packages)
2 個解決方案
解決方案1
0 2022-08-19 07:51:19
雖然我從來沒有遇到過這個問題，但是從錯誤信息來看，我猜這是缺少模塊的問題。
__main__.RequiredDependencyException:
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
嘗試運行import zlib ，看看導入模塊是否有任何錯誤。 如果您還沒有zlib ，請安裝它。
此外， GitHub上的 Pillow repo 報告了同樣的問題。 據此，您也可以嘗試重新安裝pip看看是否可以解決問題。
希望這可以幫助。
解決方案2
0 2022-09-18 07:10:10
https://pillow.readthedocs.io/en/latest/installation.html
看到那個
我現在才解決它，這需要我很多時間
導入 matplotlib 時出現錯誤
首先剪切或刪除或卸載PIL。 我刪除它然后 python3 -m pip install --upgrade Pillow 或 pip install --upgrade Pillow 或查看 web 以查找版本
Pip 不能裝枕頭
聲明:本站的技術帖子網頁，遵循CC BY-SA 4.0協議，如果您需要轉載，請注明本站網址或者原文地址。任何問題請咨詢:yoyou2525@163.com.