需要 C# 函数将灰度 TIFF 转换为黑白（单色/1BPP）TIFF

Question

I need a C# function that will take a Byte[] of an 8 bit grayscale TIFF, and return a Byte[] of a 1 bit (black & white) TIFF.

I'm fairly new to working with TIFFs, but the general idea is that we need to convert them from grayscale or color to black and white/monochrome/binary image format.

We receive the images via a WCF as a Byte[], then we need to make this conversion to black & white in order to send them to a component which does further processing. We do not plan at this point, to ever save them as files.

For reference, in our test client, this is how we create the Byte[]:

        FileStream fs = new FileStream("test1.tif", FileMode.Open, FileAccess.Read);
        this.image = new byte[fs.Length];
        fs.Read(this.image, 0, System.Convert.ToInt32(fs.Length));
        fs.Close();

--------update---------

I think there may be more than 1 good answer here, but we ended up using the code from the CodeProject site with the following method added to overload the convert function to accept Byte[] as well as bitmap:

public static Byte[] ConvertToBitonal(Byte[] original)
    {
        Bitmap bm = new Bitmap(new System.IO.MemoryStream(original, false));
        bm = ConvertToBitonal(bm);
        System.IO.MemoryStream s = new System.IO.MemoryStream();
        bm.Save(s, System.Drawing.Imaging.ImageFormat.Tiff);
        return s.ToArray();
    }

Answer 1

There is an article on CodeProject here that describes what you need.

Answer 2

@neodymium has a good answer, but GetPixel/SetPixel will kill performance. Bob Powell has a great method .

C#:

    private Bitmap convertTo1bpp(Bitmap img)
    {
        BitmapData bmdo = img.LockBits(new Rectangle(0, 0, img.Width, img.Height),
                                       ImageLockMode.ReadOnly, 
                                       img.PixelFormat);

        // and the new 1bpp bitmap
        Bitmap bm = new Bitmap(img.Width, img.Height, PixelFormat.Format1bppIndexed);
        BitmapData bmdn = bm.LockBits(new Rectangle(0, 0, bm.Width, bm.Height),
                                      ImageLockMode.ReadWrite, 
                                      PixelFormat.Format1bppIndexed);

        // scan through the pixels Y by X
        for(int y = 0; y < img.Height; y++)
        {
            for(int x = 0; x < img.Width; x++)
            {
                // generate the address of the colour pixel
                int index = y * bmdo.Stride + x * 4;

                // check its brightness
                if(Color.FromArgb(Marshal.ReadByte(bmdo.Scan0, index + 2), 
                                  Marshal.ReadByte(bmdo.Scan0, index + 1), 
                                  Marshal.ReadByte(bmdo.Scan0, index)).GetBrightness() > 0.5F)
                {
                    setIndexedPixel(x, y, bmdn, true); // set it if its bright.
                }
             }
        }

        // tidy up
        bm.UnlockBits(bmdn);
        img.UnlockBits(bmdo);
        return bm;
    }

    private void setIndexedPixel(int x, int y, BitmapData bmd, bool pixel)
    {
        int index = y * bmd.Stride + (x >> 3);
        byte p = Marshal.ReadByte(bmd.Scan0, index);
        byte mask = (byte)(0x80 >> (x & 0x7));

        if (pixel)
        {
            p |= mask;
        }
        else
        {
            p &= (byte)(mask ^ 0xFF);
        }

        Marshal.WriteByte(bmd.Scan0, index, p);
    }

Answer 3

might want to check out 'Craigs Utility Library' I believe he has that functionality in place. Craig's Utility Library

Answer 4

My company's product, dotImage , will do this.

Given an image, you can convert from multi-bit to single bit using several methods including simple threshold, global threshold, local threshold, adaptive threshold, dithering (ordered and Floyd Steinberg), and dynamic threshold. The right choice depends on the type of the input image (document, image, graph).

The typical code looks like this:

AtalaImage image = new AtalaImage("path-to-tiff", null);
ImageCommand threshold = SomeFactoryToConstructAThresholdCommand();
AtalaImage finalImage = threshold.Apply(image).Image;

SomeFactoryToConstructAThresholdCommand() is a method that will return a new command that will process the image. It could be as simple as

return new DynamicThresholdCommand();

or

return new GlobalThresholdCommand();

And generally speaking, if you're looking to convert an entire multi-page tiff to black and white, you would do something like this:

// open a sequence of images
FileSystemImageSource source = new FileSystemImageSource("path-to-tiff", true);

using (FileStream outstm = new FileStream("outputpath", FileMode.Create)) {
    // make an encoder and a threshold command
    TiffEncoder encoder = new TiffEncoder(TiffCompression.Auto, true);
    // dynamic is good for documents -- needs the DocumentImaging SDK
    ImageCommand threshold = new DynamicThreshold();

    while (source.HasMoreImages()) {
        // get next image
        AtalaImage image = source.AcquireNext();
        AtalaImage final = threshold.Apply(image).Image;
        try {
            encoder.Save(outstm, final, null);
        }
        finally {
            // free memory from current image
            final.Dispose();
            // release the source image back to the image source
            source.Release(image);
        }
    }
}

Answer 5

First, you would need to know how an X,Y pixel location maps to an index value in you array. This will depend upon how your Byte[] was constructed. You need to know the details of your image format - for example, what is the stride ?

I don't see 8 bit grayscale TIFF in the PixelFormat enumeration. If it was there, it would tell you what you need to know.

Then, iterate through each pixel and look at its color value. You need to decide on a threshold value - if the color of the pixel is above the threshold, make the new color white; otherwise, make it black.

If you want to simulate grayscale shading with 1BPP, you could look at more advanced techniques, such as dithering.

Answer 6

Something like this might work, I haven't tested it. (Should be easy to C# it.)

    Dim bmpGrayscale As Bitmap = Bitmap.FromFile("Grayscale.tif")
    Dim bmpMonochrome As New Bitmap(bmpGrayscale.Width, bmpgrayscale.Height, Imaging.PixelFormat.Format1bppIndexed)
    Using gfxMonochrome As Graphics = Graphics.FromImage(bmpMonochrome)
        gfxMonochrome.Clear(Color.White)
    End Using
    For y As Integer = 0 To bmpGrayscale.Height - 1
        For x As Integer = 0 To bmpGrayscale.Width - 1
            If bmpGrayscale.GetPixel(x, y) <> Color.White Then
                bmpMonochrome.SetPixel(x, y, Color.Black)
            End If
        Next
    Next
    bmpMonochrome.Save("Monochrome.tif")

This might be a better way still:

Using bmpGrayscale As Bitmap = Bitmap.FromFile("Grayscale.tif")
    Using bmpMonochrome As New Bitmap(bmpGrayscale.Width, bmpgrayscale.Height, Imaging.PixelFormat.Format1bppIndexed)
        Using gfxMonochrome As Graphics = Graphics.FromImage(bmpMonochrome)
            gfxMonochrome.CompositingQuality = Drawing2D.CompositingQuality.HighQuality
            gfxMonochrome.SmoothingMode = Drawing2D.SmoothingMode.HighQuality
            gfxMonochrome.DrawImage(bmpGrayscale, new Rectangle(0, 0, bmpMonochrome.Width, bmpMonochrome.Height)
        End Using
        bmpMonochrome.Save("Monochrome.tif")
    End Using
End Using

I believe the term you are looking for is "resampling".

Answer 7

pixel by pixel manipulation is extremly slow. 40 times slower than System.DrawImage. System.Draw image is half solution, corrupts the picture (300dpi-->96dpi) and produces at 300dpi source 200-400kb large result files.

        public static Image GetBlackAndWhiteImage(Image SourceImage)
    {

        Bitmap bmp = new Bitmap(SourceImage.Width, SourceImage.Height);

        using (Graphics gr = Graphics.FromImage(bmp)) // SourceImage is a Bitmap object
        {
            var gray_matrix = new float[][] {
            new float[] { 0.299f, 0.299f, 0.299f, 0, 0 },
            new float[] { 0.587f, 0.587f, 0.587f, 0, 0 },
            new float[] { 0.114f, 0.114f, 0.114f, 0, 0 },
            new float[] { 0,      0,      0,      1, 0 },
            new float[] { 0,      0,      0,      0, 1 }
        };

            var ia = new System.Drawing.Imaging.ImageAttributes();
            ia.SetColorMatrix(new System.Drawing.Imaging.ColorMatrix(gray_matrix));
            ia.SetThreshold(float.Parse(Settings.Default["Threshold"].ToString())); // Change this threshold as needed
            var rc = new Rectangle(0, 0, SourceImage.Width, SourceImage.Height);
            gr.DrawImage(SourceImage, rc, 0, 0, SourceImage.Width, SourceImage.Height, GraphicsUnit.Pixel, ia);
        }
        return bmp;
    }

The perfect way is just simply convert to CCITT decoded tif, that contains only BW. Much more efficent method with 30-50kb result file, 300dpi also remains correct as well:

        public void toCCITT(string tifURL)
    {
        byte[] imgBits = File.ReadAllBytes(tifURL);

        using (MemoryStream ms = new MemoryStream(imgBits))
        {
            using (Image i = Image.FromStream(ms))
            {
                EncoderParameters parms = new EncoderParameters(1);
                ImageCodecInfo codec = ImageCodecInfo.GetImageDecoders()
                                                     .FirstOrDefault(decoder => decoder.FormatID == ImageFormat.Tiff.Guid);

                parms.Param[0] = new EncoderParameter(Encoder.Compression, (long)EncoderValue.CompressionCCITT4);

                i.Save(@"c:\test\result.tif", codec, parms);
            }
        }
    }

Good Luck Bro,

Answer 8

I've tested this code and worked fine for me:

//You should use System.Linq for this to work
public static ImageCodecInfo TiffCodecInfo => ImageCodecInfo.GetImageDecoders().
    FirstOrDefault(decoder => decoder.FormatID == ImageFormat.Tiff.Guid);

//Encapsulate this in a try catch block for possible exceptions
public static Bitmap ConvertToBitonal(Bitmap original)
{
    EncoderParameters encoderParameters;
    MemoryStream ms = new MemoryStream();
    Bitmap result;

    encoderParameters = new EncoderParameters(1);
    encoderParameters.Param[0] = new EncoderParameter(Encoder.ColorDepth, 1L);
    original.Save(ms, TiffCodecInfo, encoderParameters);
    result = new Bitmap(Image.FromStream(ms));
    ms.Dispose();
    return result;
}