How can I disable a tab inside a TabControl?

Question

Is there a way to disable a tab in a TabControl ?

Answer 1

Cast your TabPage to a Control, then set the Enabled property to false.

((Control)this.tabPage).Enabled = false;

Therefore, the tabpage's header will still be enabled but its contents will be disabled.

Answer 2

The TabPage class hides the Enabled property. That was intentional as there is an awkward UI design problem with it. The basic issue is that disabling the page does not also disable the tab. And if try to work around that by disabling the tab with the Selecting event then it does not work when the TabControl has only one page.

If these usability problems do not concern you then keep in mind that the property still works, it is merely hidden from IntelliSense. If the FUD is uncomfortable then you can simply do this:

public static void EnableTab(TabPage page, bool enable) {
    foreach (Control ctl in page.Controls) ctl.Enabled = enable;
}

Answer 3

You can simply use:

tabPage.Enabled = false;

This property is not shown, but it works without any problems.

You can program the Selecting event on TabControler to make it impossible to change to a non-editable tab:

private void tabControler_Selecting(object sender, TabControlCancelEventArgs e)
{
    if (e.TabPageIndex < 0) return;
    e.Cancel = !e.TabPage.Enabled;
}

Answer 4

You could register the "Selecting" event and cancel the navigation to the tab page:

private void tabControl1_Selecting(object sender, TabControlCancelEventArgs e)
{
    if (e.TabPage == tabPage2)
        e.Cancel = true;
}

Another idea is to put all the controls on the tabpage in a Panel control and disable the panel! Smiley

You could also remove the tabpage from the tabControl1.TabPages collection. That would hide the tabpage.

Credits go to littleguru @ Channel 9 .

Answer 5

Presumably, you want to see the tab in the tab control, but you want it to be "disabled" (ie, greyed, and unselectable). There is no built-in support for this, but you can override the drawing mechanism to give the desired effect.

An example of how to do this is provided here .

The magic is in this snippet from the presented source, and in the DisableTab_DrawItem method:

this.tabControl1.DrawMode = TabDrawMode.OwnerDrawFixed;
this.tabControl1.DrawItem += new DrawItemEventHandler( DisableTab_DrawItem );

Answer 6

Extending upon Cédric Guillemette answer, after you disable the Control :

((Control)this.tabPage).Enabled = false;

...you may then handle the TabControl 's Selecting event as:

private void tabControl_Selecting(object sender, TabControlCancelEventArgs e)
{
    e.Cancel = !((Control)e.TabPage).Enabled;
}

Answer 7

This will remove the tab page, but you'll need to re-add it when you need it:

tabControl1.Controls.Remove(tabPage2);

If you are going to need it later, you might want to store it in a temporary tabpage before the remove and then re-add it when needed.

Answer 8

唯一的方法是捕获Selecting事件并防止选项卡被激活。

Answer 9

The most tricky way is to make its parent equals null (make the tab alone without parent):

 tabPage.Parent = null;

And when you want to return it back (will return it back at the end of pages collection) :

tabPage.Parent = tabControl;

And if you want to return it back in a specific location among the pages you can use :

tabControl.TabPages.Insert(indexLocationYouWant, tabPage);

Answer 10

I had to handle this a while back. I removed the Tab from the TabPages collection (I think that's it) and added it back in when the conditions changed. But that was only in Winforms where I could keep the tab around until I needed it again.

Answer 11

Using events, and the properties of the tab control you can enable/disable what you want when you want. I used one bool that is available to all methods in the mdi child form class where the tabControl is being used.

Remember the selecting event fires every time any tab is clicked. For large numbers of tabs a "CASE" might be easier to use than a bunch of ifs.

public partial class Form2 : Form
    {
        bool formComplete = false;

        public Form2()
        {
            InitializeComponent();

        }

        private void button1_Click(object sender, EventArgs e)
        {


            formComplete = true;
            tabControl1.SelectTab(1);

        }

        private void tabControl1_Selecting(object sender, TabControlCancelEventArgs e)
        {
            if (tabControl1.SelectedTab == tabControl1.TabPages[1])
            {

                tabControl1.Enabled = false;

                if (formComplete)
                {
                    MessageBox.Show("You will be taken to next tab");
                    tabControl1.SelectTab(1);

                }
                else
                {
                    MessageBox.Show("Try completing form first");
                    tabControl1.SelectTab(0);
                }
                tabControl1.Enabled = true;
            }
        }
    }

Answer 12

你可以通过标签页来实现：tabPage1.Hide()、tabPage2.Show() 等。

Answer 13

The user cannot click on tabs to navigate, but they can use the two buttons ( Next and Back ). The user cannot continue to the next if the //conditions are no met.

private int currentTab = 0;

private void frmOneTimeEntry_Load(object sender, EventArgs e)
{
    tabMenu.Selecting += new TabControlCancelEventHandler(tabMenu_Selecting);
}

private void tabMenu_Selecting(object sender, TabControlCancelEventArgs e)
{
    tabMenu.SelectTab(currentTab);
}

private void btnNextStep_Click(object sender, EventArgs e)
{
    switch(tabMenu.SelectedIndex)
    {
        case 0:
            //if conditions met GoTo
        case 2:
            //if conditions met GoTo
        case n:
            //if conditions met GoTo
    {
    CanLeaveTab:
    currentTab++;
    tabMenu.SelectTab(tabMenu.SelectedIndex + 1);
    if (tabMenu.SelectedIndex == 3)
        btnNextStep.Enabled = false;
    if (btnBackStep.Enabled == false)
        btnBackStep.Enabled = true;

    CannotLeaveTab:
        ;
}

private void btnBackStep_Click(object sender, EventArgs e)
{
    currentTab--;
    tabMenu.SelectTab(tabMenu.SelectedIndex - 1);
    if (tabMenu.SelectedIndex == 0)
        btnBackStep.Enabled = false;
    if (btnNextStep.Enabled == false)
        btnNextStep.Enabled = true;
}

Answer 14

我已经这样解决了这个问题：我有 3 个选项卡，如果他没有登录，我想将用户保留在第一个选项卡上，所以在我写的 TabControl 的 SelectingEvent 上

if (condition) { TabControl.Deselect("2ndPage"); TabControl.Deselect("3dPage"); }

Answer 15

tabControl.TabPages.Remove(tabPage1);

Answer 16

rfnodulator answer for Vb.Net:

Private Sub TabControl1_Selecting(sender As Object, e As TabControlCancelEventArgs) Handles TabControl1.Selecting
        e.Cancel = Not e.TabPage.Enabled
End Sub

Answer 17

I've removed tab pages in the past to prevent the user from clicking them. This probably isn't the best solution though because they may need to see that the tab page exists.

Answer 18

This is an old question, but someone may benefit from my addition. I needed a TabControl that would show hidden tabs successively (after an action was performed on the current tab). So, I made a quick class to inherit from and called HideSuccessive() on Load:

public class RevealingTabControl : TabControl
{
    private Action _showNextRequested = delegate { };

    public void HideSuccessive()
    {
        var tabPages = this.TabPages.Cast<TabPage>().Skip(1);
        var queue = new ConcurrentQueue<TabPage>(tabPages);
        tabPages.ToList().ForEach(t => t.Parent = null);
        _showNextRequested = () =>
        {
            if (queue.TryDequeue(out TabPage tabPage))
                tabPage.Parent = this;
        };
    }

    public void ShowNext() => _showNextRequested();
}

Answer 19

XtraTabPage.PageEnabled 属性允许您禁用某些页面。

Answer 20

Here the solution that i implement:

   private void switchTapPage(TabPage tabPage)
    {
        
        foreach(TabPage page in tabControl1.TabPages)
        {
            tabControl1.TabPages.Remove(page);
        }

        tabControl1.TabPages.Add(tabPage);
    }

Basically, i just call this method sending the tabPage that i currently need to show, the method will remove all the tabPages on the tabControl and after that it will just add the one that i sent it.

So the rest of the tabHeaders will not shown and they will be inaccessible, because they dont even exists in the tabControl.

I took the idea from the @storm.net answer.

Answer 21

在表单加载事件中如果我们写this.tabpage.PageEnabled = false ，tabpage 将被禁用。

Answer 22

Assume that you have these controls:

TabControl with name tcExemple.

TabPages with names tpEx1 and tpEx2.

Try it:

Set DrawMode of your TabPage to OwnerDrawFixed; After InitializeComponent(), make sure that tpEx2 is not enable by adding this code:

((Control)tcExemple.TabPages["tpEx2").Enabled = false;

Add to Selection tcExemple event the code below:

private void tcExemple_Selecting(object sender, TabControlCancelEventArgs e)
    {
        if (!((Control)e.TabPage).Enabled)
        {
            e.Cancel = true;
        }
    }

Attach to DrawItem event of tcExemple this code:

private void tcExemple_DrawItem(object sender, DrawItemEventArgs e)
    {
        TabPage page = tcExemple.TabPages[e.Index];
        if (!((Control)page).Enabled)
        {
            using (SolidBrush brush = new SolidBrush(SystemColors.GrayText))
            {
                e.Graphics.DrawString(page.Text, page.Font, brush, e.Bounds);
            }
        }
        else
        {
            using (SolidBrush brush = new SolidBrush(page.ForeColor))
            {
                e.Graphics.DrawString(page.Text, page.Font, brush, e.Bounds);
            }
        }
    }

It will make the second tab non-clickable.

Answer 23

I could not find an appropriate answer to the question. There looks to be no solution to disable the specific tab. What I did is to pass the specific tab to a variable and in SelectedIndexChanged event put it back to SelectedIndex :

//variable for your specific tab 
int _TAB = 0;

//here you specify your tab that you want to expose
_TAB = 1;
tabHolder.SelectedIndex = _TAB;

private void tabHolder_SelectedIndexChanged(object sender, EventArgs e)
{
    if (_TAB != 0) tabHolder.SelectedIndex = _TAB;
}

So, you don't actually disable the tab, but when another tab is clicked it always returns you to the selected tab.

Answer 24

in C# 7.0, there is a new feature called Pattern Matching . You can disable all tabs via Type Pattern .

foreach (Control control in Controls)
{
    // the is expression tests the variable and 
    // assigned it to a new appropriate variable type
    if (control is TabControl tabs)
    {
        tabs.Enabled = false;
    }
}

Answer 25

Use:

 tabControl1.TabPages[1].Enabled = false;

By writing this code, the tab page won't be completely disabled (not being able to select), but its internal content will be disabled which I think satisfy your needs.

Answer 26

The solution is very simple.

Remove/comment this line

this.tabControl.Controls.Add(this.YourTabName);

in IntializeComponent() method in MainForm.cs

Answer 27

MyTabControl.SelectedTab.Enabled = false;