Capture video data from screen in Python

Question

Is there a way with Python (maybe with OpenCV or PIL) to continuously grab frames of all or a portion of the screen, at least at 15 fps or more? I've seen it done in other languages, so in theory it should be possible.

I do not need to save the image data to a file. I actually just want it to output an array containing the raw RGB data (like in a numpy array or something) since I'm going to just take it and send it to a large LED display (probably after re-sizing it).

Answer 1

There is an other solution with mss which provide much better frame rate. (Tested on a Macbook Pro with MacOS Sierra)

import numpy as np
import cv2
from mss import mss
from PIL import Image

mon = {'left': 160, 'top': 160, 'width': 200, 'height': 200}

with mss() as sct:
    while True:
        screenShot = sct.grab(mon)
        img = Image.frombytes(
            'RGB', 
            (screenShot.width, screenShot.height), 
            screenShot.rgb, 
        )
        cv2.imshow('test', np.array(img))
        if cv2.waitKey(33) & 0xFF in (
            ord('q'), 
            27, 
        ):
            break

Answer 2

With all of the above solutions, I was unable to get a usable frame rate until I modified my code in the following way:

import numpy as np
import cv2
from mss import mss
from PIL import Image

bounding_box = {'top': 100, 'left': 0, 'width': 400, 'height': 300}

sct = mss()

while True:
    sct_img = sct.grab(bounding_box)
    cv2.imshow('screen', np.array(sct_img))

    if (cv2.waitKey(1) & 0xFF) == ord('q'):
        cv2.destroyAllWindows()
        break

With this solution, I easily get 20+ frames/second.

For reference, check this link: OpenCV/Numpy example with mss

Answer 3

You will need to use ImageGrab from Pillow (PIL) Library and convert the capture to numpy array. When you have the array you can do what you please with it using opencv. I converted capture to gray color and used imshow() as a demonstration.

Here is a quick code to get you started:

from PIL import ImageGrab
import numpy as np
import cv2

img = ImageGrab.grab(bbox=(100,10,400,780)) #bbox specifies specific region (bbox= x,y,width,height *starts top-left)
img_np = np.array(img) #this is the array obtained from conversion
frame = cv2.cvtColor(img_np, cv2.COLOR_BGR2GRAY)
cv2.imshow("test", frame)
cv2.waitKey(0)
cv2.destroyAllWindows()

you can plug an array there with the frequency you please to keep capturing frames. After that you just decode the frames. don't forget to add before the loop:

fourcc = cv2.VideoWriter_fourcc(*'XVID')
vid = cv2.VideoWriter('output.avi', fourcc, 6, (640,480))

and inside the loop you can add:

vid.write(frame) #the edited frame or the original img_np as you please

UPDATE
the end result look something like this (If you want to achieve a stream of frames that is. Storing as video just a demonstration of using opencv on the screen captured):

from PIL import ImageGrab
import numpy as np
import cv2
while(True):
    img = ImageGrab.grab(bbox=(100,10,400,780)) #bbox specifies specific region (bbox= x,y,width,height)
    img_np = np.array(img)
    frame = cv2.cvtColor(img_np, cv2.COLOR_BGR2GRAY)
    cv2.imshow("test", frame)
    cv2.waitKey(0)
cv2.destroyAllWindows()

Hope that helps

Answer 4

based on this post and others posts, i made something like this . Its taking a screenshot and writing into a video file without saving the img.

import cv2
import numpy as np
import os
import pyautogui

output = "video.avi"
img = pyautogui.screenshot()
img = cv2.cvtColor(np.array(img), cv2.COLOR_RGB2BGR)
#get info from img
height, width, channels = img.shape
# Define the codec and create VideoWriter object
fourcc = cv2.VideoWriter_fourcc(*'mp4v')
out = cv2.VideoWriter(output, fourcc, 20.0, (width, height))

while(True):
 try:
  img = pyautogui.screenshot()
  image = cv2.cvtColor(np.array(img), cv2.COLOR_RGB2BGR)
  out.write(image)
  StopIteration(0.5)
 except KeyboardInterrupt:
  break

out.release()
cv2.destroyAllWindows()

Answer 5

You can try this=>

import mss
import numpy

with mss.mss() as sct:
    monitor = {'top': 40, 'left': 0, 'width': 800, 'height': 640}
    img = numpy.array(sct.grab(monitor))
    print(img)

Answer 6

You can try this code as it is working for me. I've tested it on Linux

import numpy as np
import cv2
from mss import mss
from PIL import Image

sct = mss()

while 1:
    w, h = 800, 640
    monitor = {'top': 0, 'left': 0, 'width': w, 'height': h}
    img = Image.frombytes('RGB', (w,h), sct.grab(monitor).rgb)
    cv2.imshow('test', cv2.cvtColor(np.array(img), cv2.COLOR_RGB2BGR))
    if cv2.waitKey(25) & 0xFF == ord('q'):
        cv2.destroyAllWindows()
        break

Make sure that the following packages are installed:

Pillow, opencv-python, numpy, mss

Answer 7

If anyone looking for a much easier and faster way to grab screen with mss library, then try ScreenGear class from my high-performance video-processing vidgear library. Just write these few lines of python code on any machine (Tested on all platforms, including Windows 10, MacOS Serra, Linux Mint) and enjoy threaded screen-casting.

# import required libraries
from vidgear.gears import ScreenGear
import cv2

# define dimensions of screen w.r.t to given monitor to be captured
options = {'top': 40, 'left': 0, 'width': 100, 'height': 100}

# open video stream with defined parameters
stream = ScreenGear(monitor=1, logging=True, **options).start()

# loop over
while True:

    # read frames from stream
    frame = stream.read()

    # check for frame if Nonetype
    if frame is None:
        break


    # {do something with the frame here}


    # Show output window
    cv2.imshow("Output Frame", frame)

    # check for 'q' key if pressed
    key = cv2.waitKey(1) & 0xFF
    if key == ord("q"):
        break

# close output window
cv2.destroyAllWindows()

# safely close video stream
stream.stop()

VidGear library Docs: https://abhitronix.github.io/vidgear

ScreenGear API: https://abhitronix.github.io/vidgear/latest/gears/screengear/overview/

More examples: https://abhitronix.github.io/vidgear/latest/gears/screengear/usage/

Answer 8

I tried all of the above but it did not give me the real-time screen update. You can try this. This code is tested and worked successfully and also give you a good fps output. You can also judge this by each loop time it's needed.

import numpy as np
import cv2
from PIL import ImageGrab as ig
import time

last_time = time.time()
while(True):
    screen = ig.grab(bbox=(50,50,800,640))
    print('Loop took {} seconds',format(time.time()-last_time))
    cv2.imshow("test", np.array(screen))
    last_time = time.time()
    if cv2.waitKey(25) & 0xFF == ord('q'):
        cv2.destroyAllWindows()
        break

Answer 9

This task is very simple with opencv, we are just capturing screenshots in loop, and converting it into frames. I created timer for screenrecording, in start you have to enter how many seconds you want to record:) Here is the code.

import cv2
import numpy as np
import pyautogui
from win32api import GetSystemMetrics
import time

#Take resolution from system automatically
w = GetSystemMetrics(0)
h =  GetSystemMetrics(1)
SCREEN_SIZE = (w,h)
fourcc = cv2.VideoWriter_fourcc(*"XVID")
out = cv2.VideoWriter("recording.mp4", fourcc, 20.0, (SCREEN_SIZE))
tim = time.time()
tp = int(input('How many times you want to record screen?->(Define value in Seconds): '))
tp = tp+tp
f = tim+tp
while True:
    img = pyautogui.screenshot()
    frame = np.array(img)
    frame = cv2.cvtColor(frame, cv2.COLOR_BGR2RGB)
    out.write(frame)
    tu = time.time()
    if tu>f:
        break
cv2.destroyAllWindows()
out.release()

So that's how you can use time in screen recording, you don't need to use imshow() because it shows infinitely our screen recording on-screen so output video looks weird.

Answer 10

I've tried ImageGrab from PIL and it gave me 20fps which is ok but using win32 libraries gave me +40fps which is amazing!

I used this code by Frannecklp but it didn't work just fine so I needed to modify it:

-Firstly pip install pywin32 in case using the libraries

-import the libraries like this instead:

import cv2
import numpy as np
from win32 import win32gui
from pythonwin import win32ui
from win32.lib import win32con
from win32 import win32api

for geting a simple image screen do:

from grab_screen import grab_screen
import cv2
img = grab_screen()
cv2.imshow('frame',img)

and for getting frames:

while(True):
#frame = grab_screen((0,0,100,100))
frame = grab_screen()
cv2.imshow('frame',frame)
if cv2.waitKey(1) & 0xFF == ord('q') or x>150:
    break