I am running a ItsyBitsy M0 board with a custom firmware using the ATMEL start (HID GENERIC). When I run the firmware as default the device shows up ...
I need to add two 9 bit numbers using the instructions ADD and ADC. The numbers are stored in R21:R20 and R23:R22 (MSB: LSB) pairs of registers. The r ...
I'm working on a Distance measurement program using an AVR microcontroller. I use a 16x2 LCD and an ultrasonic sensor along with ATMEGA32A. I wrote a ...
I'm trying to build an Atmel START project using GCC such that it will load with the Adafruit UF2 bootloader on a SAMD21 chip. From prior research I' ...
Edit: Probably solved I can successfully change the fuse bits in the GUI. I know this because I can read the values of the fuse bits of the chi ...
I am using MPLAB to program ATSAMD20E15A. Now I have boot.bin and program.bin binray files generated. My question is: How do I find the offset addres ...
I have ATMEL ICE C initial connection problems - it cannot read device signature, because of the target board voltage isn't between range of 1.8 to 5. ...
I have an issue with Grid-Eye Eval Kit (Panasonic production). I could not connect it to the PC with USB port. The PC cannot recognize it to perform t ...
I currently use a custom board based on SAMa5D31: Emmc is currently used for boot The Uboot fails to be started Stuck in SD/MMC: Done to load ...
I try implementation of MQTT client on ATSAME53N20A. I achieved wih succes tcp-ip server-client application with lwip bsd socket api before. But this ...
I am developing on SAM3X8E, I am using the GCC C++ compiler and atmel studio 7. I am trying to include the stdio library and I keep getting the error: ...
I'm trying to work with AT88SC1608 smart card with a card reader which works with dcic32.dll in a C# app some functions like IC_CheckCard or IC_InitC ...
is it possible to use one GCLK for more peripherals? The ATSAMD09C13 have six GCLK Generators but this isn´t enougth. This example works: This ex ...
I try to activate a timer at the first detection on falling edge of hardware interrupt detection and to deactivate the timer after 8 runs. But when I ...
Background: I wrote a function in C and compiled it with arm-none-eabi-gcc (7-2018-q2-update). The generated assembly code for the loop body looks li ...
I could program and debug this project for the first time. But the problem is that I can't reprogram or debug it again. There is no bootloader on the ...
My custom board with Atmel SAMD21 microcontroller (same as Arduino MKR Zero) is not making a USB port since yesterday. The board was working fine befo ...
I'm trying to interface vl53l0x sensor with my atSamE51A19 controller. I can send the data to the sensor. As it has established connection I send iden ...
I am writing c code targeting a SAME51 based Atmel/ Microchip processor. I am using Microchip's MPLABX to compile and run the code. I have header fil ...
I have recently been using Atmel studio 7. I'll briefly explain my problem: i can't get debugging to work because i can't select DEBUG mode. this is ...