My requirement -- was to Remove the package alsa from the Yocto Build. So I just tried to Remove the ALSA Packages from the Yocto Build. I foll ...

I am trying to compile https://github.com/varigit/linux-imx.git for ARCH=arm64 with CROSS_COMPILE=arm-none-eabi-, but I get the error followed by p ...

I am working on Yocto project in ubuntu 20.04. When I run build by using bitbake command, I got build error which I wrote down below. I searched seve ...

I'm (trying to) use OpenCV on an embedded Linux distribution running on an i.MX8QM processor. I have an MJPEG USB camera connected to this board that ...

I'm working on an embedded Linux device (based on an NXP i.MX8 mini SoC) and it needs to support microphone audio input using the NXP "micfil" driver ...

I am evaluating an NXP iMX.8 based (which is arm64v8) board. The eval kit came with a 5.10.72 Linux kernel but did not have binfmt_misc kernel module. ...

Currently Google coral dev runs on Mendel OS which supports Linux kernel v4.14 https://coral.googlesource.com/linux-imx/ linux-imx a ...

I'm trying to build an image using bitbake for the i.MX8 board. I'm following these instructions: https://www.nxp.com/docs/en/user-guide/IMX_YOCTO_PR ...

I built a certain driver as module (m) for Linux, the spi-imx by NXP. Nontheless, Linux probes this driver when booting. I'm struggling to find out wh ...

On my Android system, there are two separate healthd processes: They both use the same code from system/core/healthd and hardware/interfaces/health ...

I am using imx8mnevk and I was trying to rebuild an image and removed the tmp directory. I ran bitbake core-image-minimal but now the tmp directory d ...

I need to make a fixed-frequency screen (with a new custom mode line): (in edid_cea_modes[] in imx-hdp.c) work with the iMX8M. My problem is that ...