When debugging the STM32 with OpenOCD and GDB, OpenOCD does not continue to debug when the MCU wakes up from STOP mode. I have the following code whi ...

Trying to debug ESP32-S3 with PlatformIO on VSCode with macOS on M1. Installed ftdi drivers from their website. (installed the VCP drivers, not the D ...

I am trying to flash STM32F1 from linux on the NanoPi Neo with openocd. The problem i have is i can't use any of the interfaces such as interface/rasp ...

I have successfully flashed a nucleo-h743zi board with a small app that blinks an LED and sends strings through the UART. I'm now trying to connect t ...

I am trying to debug my daisy program but I can't get VSCode to program the device, even though it works from the command line. When I do task progra ...

I'm going to try and describe this as best as possible and go through everything I tried to resolve it but I'm not sure I'll be able to capture it all ...

After I finished writing this I saw that rwatch actives a signal, SIGTRAP, which seems to be different than a breakpoint. I'm confused now because the ...

So I have a Blackhawk XDS200 Debug Probe (TMDSEMU200-U) and I would like to use OpenOCD to debug on my target platform (IWR6483). When I create a con ...

I'm so tired of damn Windows and damn computers, its just entropy churning out more waste of time ... but now that I'm here, this is my problem: I us ...

I stay trying this: https://nc-pin.com/index.php/category/wch/ch32v-series/ch32v307/ Debugging CH32V307V with Visual Studio Code on macOS The part mo ...

I am working with a RP2040 multicore MCU running FreeRTOS SMP; and so far I have used the following one-liner command to restart the code running on t ...

I am trying to learn how to debug an MCU non-intrusively using SWD & openOCD. while (1) { my_count++; HAL_GPIO_TogglePin(LD ...

I want to debug a Raspberry Pi Pico with another Raspberry Pi Pico but when I try to debug "hello_uart.elf", I receive the following output error: ...

I'm on windows 10 trying to debug my bluepill (STM32f103C8) board using a stlink, openocd, and vscode. I get this pop up: "OpenOCD GDB Server Quit Une ...

Trying to debug multi CPU SoC (Amlogic A113X) and faced a problem. So I have this debug configuration: A113X(JTAG) -> Segger J-Link V11 -> OpenO ...

I have a nucleo-144 board with stm32f746zg MCU. I'm trying to program the board with openocd, using gnu make and the makefile generated from stm32cube ...

When I call openocd which is linux executable , it give me : Because of we cant call avalible usb device from WSL , so we call .exe in WSL for inst ...

I'm currently trying to get a better understanding of the embedded toolchain by leaving the common out-of-the-box IDEs and create my own inside of Vis ...

I am trying to flash a code to a STM32F030R8T6 using Visual Studio Code and OpenOCD on Windows 10. I am also using STM32CubeMX to auto generate the be ...

I set up the IDF and Eclipse plugin for ESP32. Building, Flasking and debugging works. But I have one small (but very annoying problem) - Eclipse doe ...