堆棧內存溢出
  簡體   English   中英

Arduino Uno：當第二次按下時，While 循環無法使用 Button 重置計時器“重新啟動”？

[英]Arduino Uno: While-loop fails to "restart" using Button to reset Timer when second-pressing?

 原文  2020-11-07 17:45:17  6   2    c/ arduino/ arduino-uno

問題描述

代碼的作用：

  1. 代碼首先顯示一個簡短的“閃爍動畫”，其中片段 AF 一次打開和關閉一個。
  2. “閃爍動畫”持續 3-10 秒，然后計時器開始計時。
  3. 計時器從數字 1 和 2 顯示的 0-99 秒開始計數。而數字 3 和 4 分別顯示一秒的第 10 和第 100。
  4. 通過使用連接的按鈕，您可以通過按下它來停止計時器。 計時器停止並顯示時間。
  5. 通過第二次按下按鈕，它應該重新啟動計時器並將我們送回第 1 步。

我的問題：當我到達代碼中的第 5 步時，它不會重新啟動。 問題與主函數中的 while 循環有關，據我所知，是由函數“stopTimer”中的第二個 while 循環引起的。 無法退出循環。 至少這是我從無數次失敗的嘗試中了解到的！ 也嘗試在“stopDisplay”函數中添加帶有 if 語句的代碼，包括 break； 或返回； 等等。

#include <stdlib.h>
#include <stdio.h>
#include <time.h>
#include <avr/io.h>
#include <util/delay.h>

#define BUTTONPRESSED PINC & 1 << PC0

    /*
    - PORT = D
    Segment-A   Pin 1   PD1     0B00000010
    Segment-B   Pin 2   PD2     0B00000100
    Segment-C   Pin 3   PD3     0B00001000
    Segment-D   Pin 4   PD4     0B00010000
    Segment-E   Pin 5   PD5     0B00100000
    Segment-F   Pin 6   PD6     0B01000000
    Segment-G   Pin 7   PD7     0B10000000

    - PORT = B
    Digit 1     Pin 10  PB2     0B00000100
    Digit 2     Pin 11  PB3     0B00001000
    Digit 3     Pin 12  PB4     0B00010000
    Digit 4     Pin 13  PB5     0B00100000

    - PORT = C
    Button      Pin A0  PC0     0B00000001
    */

//Number: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9  in a array.
int segmentNumberArray[10] = {0B01111110, 0B00001100, 0B010110110, 0B10011110, 0B011001100, 0B11011010, 0B11111010, 0B00001110, 0B11111110, 0B11011110};

//Digit: 1, 2, 3, 4   in a array
int digitArrayOff[4] = {0B00000100, 0B00001000, 0B00010000, 0B00100000};
int digitArrayOn[4] = {0B11111011, 0B11110111, 0B11101111, 0B11011111};

//Blinking animation: segment-E, segment-D, segment-C, segment-G, segment-F, segment-A, segment-B, segment-G
int blinkingArray[8] = {0B00100000, 0B00010000, 0B00001000, 0B10000000, 0B01000000, 0B00000010, 0B00000100, 0B10000000};

long number = 0;
int recentTime;
int digit1, digit2, digit3, digit4;
int stopButton;

void startTimer();
void stopTimer();
void choseDigit(int x);
void showNumberOnDisplay(int x);
void blinkingAnimation();

int main()
{

  DDRC = 0;
  DDRD = 255;
  DDRB = 0B00111100; //DDRB = 28;

  srand(time(NULL));

  while (1)
  {
    if (number == 0)
    {
      int randomWaitTime = rand() % 10 + 3; //Calls random number between 3-10
      for (int i = 0; i < randomWaitTime; i++)
      {
        blinkingAnimation();
      }
    }
    startTimer();

    if (BUTTONPRESSED)
    {
      stopButton = 0;
      stopTimer();
    }
    
    if (BUTTONPRESSED)
    {
      break;
    }
  }

  return 0;
}

void startTimer()
{
  PORTD = 0B00000000;                   //Turn ALL segments off
  choseDigit(1);                        //Turn Display 1 on
  showNumberOnDisplay((number / 1000)); //Get value of thousand
  _delay_ms(1);                         //Delay 1 ms

  PORTD = 0B00000000;                         //Turn ALL segments off
  choseDigit(2);                              //Turn Display 2 on
  showNumberOnDisplay((number % 1000) / 100); //Get value of hundred
  _delay_ms(1);                               //Delay 1 ms

  PORTD = 0B00000000;                     //Turn ALL segments off
  choseDigit(3);                          //Turn Display 3 on
  showNumberOnDisplay(number % 100 / 10); //Get value of ten
  _delay_ms(1);                           //Delay 1 ms

  PORTD = 0B00000000;               //Turn ALL segments off
  choseDigit(4);                    //Turn Display 3 on
  showNumberOnDisplay(number % 10); //Get value of single digit
  _delay_ms(1);                     //Delay 1 ms

  number++;
  if (number == 9999) // Reset number count to 1;
  {
    number = 1;
  }
}

void stopTimer()
{
  recentTime = number;
  digit1 = recentTime / 1000;
  digit2 = (recentTime % 1000) / 100;
  digit3 = recentTime % 100 / 10;
  digit4 = recentTime % 10;

  while (stopButton == 0)
  {
    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(1);               //Turn Display 1 on
    showNumberOnDisplay(digit1); //Get value of thousand
    _delay_ms(1);                //Delay 1 ms

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(2);               //Turn Display 2 on
    showNumberOnDisplay(digit2); //Get value of hundred
    _delay_ms(1);                //Delay 1 ms

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(3);               //Turn Display 3 on
    showNumberOnDisplay(digit3); //Get value of ten
    _delay_ms(1);                //Delay 1 ms

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(4);               //Turn Display 3 on
    showNumberOnDisplay(digit4); //Get value of single digit
    _delay_ms(1);                //Delay 1 ms
  }
}

void choseDigit(int x)
{
  PORTB = 0B11111111;
  switch (x)
  {
  case 1:
    PORTB = digitArrayOn[0]; //Display 1 on
    break;

  case 2:
    PORTB = digitArrayOn[1]; //Display 2 on
    break;

  case 3:
    PORTB = digitArrayOn[2]; //Display 3 on
    break;

  case 4:
    PORTB = digitArrayOn[3]; //Display 4 on
    break;
  }
}

void showNumberOnDisplay(int x)
{
  switch (x)
  {
  case 1:
    PORTD = segmentNumberArray[1];
    break;

  case 2:
    PORTD = segmentNumberArray[2];
    break;

  case 3:
    PORTD = segmentNumberArray[3];
    break;

  case 4:
    PORTD = segmentNumberArray[4];
    break;

  case 5:
    PORTD = segmentNumberArray[5];
    break;

  case 6:
    PORTD = segmentNumberArray[6];
    break;

  case 7:
    PORTD = segmentNumberArray[7];
    break;

  case 8:
    PORTD = segmentNumberArray[8];
    break;

  case 9:
    PORTD = segmentNumberArray[9];
    break;

  default:
    PORTD = segmentNumberArray[0];
    break;
  }
}

void blinkingAnimation()
{
  for (int i = 0; i < 8; i++)
  {
    PORTD = blinkingArray[i];
    _delay_ms(125);
  }
}

2 個解決方案

解決方案1
 0  2020-11-07 18:50:31

變量stopButton的值仍然為 0，導致 stopButton == 0 返回 true。 但我認為最好使用變量來表示狀態。

#define STATE_COUNT 1
#define STATE_STOP 2
int currentState = 1;
while(1){
  if(currentState == STATE_COUNT && BUTTONPRESSED){
     //do something

     currentState = STATE_STOP;
  }
  if(currentState == STATE_STOP && BUTTONPRESSED){
     //do something

     currentState = STATE_COUNT;
  }
}

已編輯

所以，我的想法是使用 STATE 來定義要運行的代碼。 所以你可以消除第二個while循環。

while (1) {
  if(currentState == STATE_BLINK){
    blink(); //run code 1 time and change state
    currentState = STATE_COUNT;
  }
  if(currentState == STATE_COUNT){
    startTimer(); 
  }
  if(currentState == STATE_STOP){
    stopTimer(); // while loop inside is removed
  }


  if (BUTTONPRESSED) {
    //change state here
  }
}

void stopTimer() {
  recentTime = number;
  digit1 = recentTime / 1000;
  digit2 = (recentTime % 1000) / 100;
  digit3 = recentTime % 100 / 10;
  digit4 = recentTime % 10;

  PORTD = 0B00000000;          //Turn ALL segments off
  choseDigit(1);               //Turn Display 1 on
  showNumberOnDisplay(digit1); //Get value of thousand
  _delay_ms(1);                //Delay 1 ms

  PORTD = 0B00000000;          //Turn ALL segments off
  choseDigit(2);               //Turn Display 2 on
  showNumberOnDisplay(digit2); //Get value of hundred
  _delay_ms(1);                //Delay 1 ms

  PORTD = 0B00000000;          //Turn ALL segments off
  choseDigit(3);               //Turn Display 3 on
  showNumberOnDisplay(digit3); //Get value of ten
  _delay_ms(1);                //Delay 1 ms

  PORTD = 0B00000000;          //Turn ALL segments off
  choseDigit(4);               //Turn Display 3 on
  showNumberOnDisplay(digit4); //Get value of single digit
  _delay_ms(1);                //Delay 1 ms 
}

void blink(){
 if (number == 0) {
  int randomWaitTime = rand() % 10 + 3; //Calls random number between 3-10
  for (int i = 0; i < randomWaitTime; i++) {
    blinkingAnimation();
  }
 }
}

解決方案2
 0 已采納  2020-11-15 11:23:49

這是我上面問題的最終解決方案。 我想我發布它以防其他人遇到類似的問題：

#include <stdlib.h>
#include <stdio.h>
#include <time.h>
#include <avr/io.h>
#include <util/delay.h>

#define BUTTONPRESSED PINC &(1 << PC0)

/*
    - PORT = D
    Segment-A   Pin 1   PD1     0B00000010
    Segment-B   Pin 2   PD2     0B00000100
    Segment-C   Pin 3   PD3     0B00001000
    Segment-D   Pin 4   PD4     0B00010000
    Segment-E   Pin 5   PD5     0B00100000
    Segment-F   Pin 6   PD6     0B01000000
    Segment-G   Pin 7   PD7     0B10000000

    - PORT = B
    Digit 1     Pin 10  PB2     0B00000100
    Digit 2     Pin 11  PB3     0B00001000
    Digit 3     Pin 12  PB4     0B00010000
    Digit 4     Pin 13  PB5     0B00100000

    - PORT = C
    Button      Pin A0  PC0     0B00000001
    */

//Number: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9  in a array
int segmentNumberArray[10] = {0B01111110, 0B00001100, 0B010110110, 0B10011110, 0B011001100, 0B11011010, 0B11111010, 0B00001110, 0B11111110, 0B11011110};

//Digit: 1, 2, 3, 4   in a array
int digitArrayOff[4] = {0B00000100, 0B00001000, 0B00010000, 0B00100000};
int digitArrayOn[4] = {0B11111011, 0B11110111, 0B11101111, 0B11011111};

//Blinking animation: segment-E, segment-D, segment-C, segment-G, segment-F, segment-A, segment-B, segment-G
int blinkingArray[8] = {0B00100000, 0B00010000, 0B00001000, 0B10000000, 0B01000000, 0B00000010, 0B00000100, 0B10000000};

long number = 0;
int recentTime;
int digit1, digit2, digit3, digit4;
int isCounting = 0;
int isButtonDown = 0;

void startTimer();
void stopTimer();
void choseDigit(int x);
void showNumberOnDisplay(int x);
void blinkingAnimation();

int main()
{

  DDRC = 0; // För knappen -->> alt. DDRC&= ~(1 << PC0);
  DDRD = 255;
  DDRB = 0B00111100; //DDRB = 28; -->> detta är för Displayerna

  srand(time(NULL));
  blinkingAnimation();

  while (1)
  {
    if (isCounting == 1)
    {
      startTimer();
    }

    if (BUTTONPRESSED)
    {
      if (isButtonDown == 0)  //Button has not been pressed before
      {
        isButtonDown = 1;
        if (isCounting == 0)
        {
          
          blinkingAnimation();
        }
        else
        {
        isCounting = 0;
        }
      }
    }
    else
    {
      isButtonDown = 0;  //Button has been released
    }

    stopTimer();
  }

  return 0;
}

void startTimer()
{
  PORTD = 0B00000000;                   //Turn ALL segments off
  choseDigit(1);                        //Turn Display 1 on
  showNumberOnDisplay((number / 1000)); //Get value of thousand
  _delay_ms(2.3);                       //Delay 1 ms

  PORTD = 0B00000000;                         //Turn ALL segments off
  choseDigit(2);                              //Turn Display 2 on
  showNumberOnDisplay((number % 1000) / 100); //Get value of hundred
  _delay_ms(2.3);                             //Delay 1 ms

  PORTD = 0B00000000;                     //Turn ALL segments off
  choseDigit(3);                          //Turn Display 3 on
  showNumberOnDisplay(number % 100 / 10); //Get value of ten
  _delay_ms(2.3);                         //Delay 1 ms

  PORTD = 0B00000000;               //Turn ALL segments off
  choseDigit(4);                    //Turn Display 4 on
  showNumberOnDisplay(number % 10); //Get value of single digit
  _delay_ms(2.3);                   //Delay 1 ms

  number++;
  if (number > 5999) // Reset number count to 1;
  {
    number = 1;
  }
}

void stopTimer()
{
  recentTime = number;
  digit1 = recentTime / 1000;
  digit2 = (recentTime % 1000) / 100;
  digit3 = recentTime % 100 / 10;
  digit4 = recentTime % 10;

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(1);               //Turn Display 1 on
    showNumberOnDisplay(digit1); //Get value of thousand
    _delay_ms(1);                //Delay 1 ms

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(2);               //Turn Display 2 on
    showNumberOnDisplay(digit2); //Get value of hundred
    _delay_ms(1);                //Delay 1 ms

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(3);               //Turn Display 3 on
    showNumberOnDisplay(digit3); //Get value of ten
    _delay_ms(1);                //Delay 1 ms

    PORTD = 0B00000000;          //Turn ALL segments off
    choseDigit(4);               //Turn Display 3 on
    showNumberOnDisplay(digit4); //Get value of single digit
    _delay_ms(1);                //Delay 1 ms
}

void choseDigit(int x)
{
  PORTB = 0B11111111;
  switch (x)
  {
  case 1:
    PORTB = digitArrayOn[0]; //Display 1 on
    break;

  case 2:
    PORTB = digitArrayOn[1]; //Display 2 on
    break;

  case 3:
    PORTB = digitArrayOn[2]; //Display 3 on
    break;

  case 4:
    PORTB = digitArrayOn[3]; //Display 4 on
    break;
  }
}

void showNumberOnDisplay(int x)
{
  switch (x)
  {
  case 1:
    PORTD = segmentNumberArray[1];
    break;

  case 2:
    PORTD = segmentNumberArray[2];
    break;

  case 3:
    PORTD = segmentNumberArray[3];
    break;

  case 4:
    PORTD = segmentNumberArray[4];
    break;

  case 5:
    PORTD = segmentNumberArray[5];
    break;

  case 6:
    PORTD = segmentNumberArray[6];
    break;

  case 7:
    PORTD = segmentNumberArray[7];
    break;

  case 8:
    PORTD = segmentNumberArray[8];
    break;

  case 9:
    PORTD = segmentNumberArray[9];
    break;

  default:
    PORTD = segmentNumberArray[0];
    break;
  }
}

void blinkingAnimation()
{
  PORTB = digitArrayOn[4];
  //Random wait time:
  int randomWaitTime = rand() % 10 + 3; //Calls random number between 3-10 seconds

  for (int i = 0; i < randomWaitTime; i++)
  {
    //Blink animation:
    for (int i = 0; i < 8; i++)
    {
      PORTD = blinkingArray[i];
      _delay_ms(125);
    }
  }
  number = 0;
  isCounting = 1;
}

暫無
暫無

聲明:本站的技術帖子網頁，遵循CC BY-SA 4.0協議，如果您需要轉載，請注明本站網址或者原文地址。任何問題請咨詢:yoyou2525@163.com.

相關問題 While-loop 第二次忽略 scanf 為什么要在arduino UNO中調用ISR，main中需要一個while循環？ while循環的問題 c語言中的while循環 簡單的while循環 Arduino Uno Timer1 似乎自行啟動 添加額外的“ int”關鍵字時，while循環不會中斷嗎？ while循環條件檢查 C while循環不停止 在 C 中使用 while 循環計算一個數字所有數字的總和
相關標簽
 
粵ICP備18138465號  © 2020-2024 STACKOOM.COM