I can't access my WildFly 10.1.0 running on Oracle Linux 6.9 in VMware vSphere Client

Question

I have WildFly 10.1.0 installed in my Oracle Linux 6.9

• My Windows IP address = 172.28.61.47
• My Oracle Linux address = 192.168.50.58

To access my Oracle Linux I used Teraterm Software using the Host = 192.168.6.253 with Port = 2258

I already changed the default localhost address with my Linux IP address in wildfly-10.1.0.Final/standalone/configuration/standalone.xml .

I can't execute these commands because they are not enabled in Oracle Linux 6.9: These two ports are the default port after installing WildFly 10.1.0. These commands will enable WildFly to be accessed outside the network, using its default port.

• sudo firewall-cmd --zone=public --add-port=8080/tcp --permanent
• sudo firewall-cmd --zone=public --add-port=9990/tcp --permanent

I tried adding port using:

• iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT
• iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 9990 -j ACCEPT

and even, stopping my iptables just to open all ports but nothing gonna happen. All ports policy are set to ACCEPT .I spent 3 days for solving these problem and still the problem exist.

To access the WildFly in Windows I used:

• http://192.168.50.58/8080

  Is there something I forgot to configure?

Answer 1

I must access the WildFly Application Server using http://192.168.6.253:8080 . If port 8080 was used then you need to redirect the port.