I have a interfaces across specific switches in a stack that are disabled and would like to print them to the cli without showing all of the connected ...
I have a interfaces across specific switches in a stack that are disabled and would like to print them to the cli without showing all of the connected ...
I'm creating a playbook for an ACL update, where the existing ACL needs to be updated, but before adding the new set of IP addresses to that ACL, I ne ...
picuture In this case (see picture), it is better to do option 4 instead of option 1, right? I know what 'reload' does and 'copy startup-config runnin ...
I tried to use access lists on router. They can contact each other but when i use access lists on Router1. I created an named and extend access list w ...
I ran this code with cisco 2960X switch. But after I got below error. Please check below to netmiko_session.log I renamed switch hostname. Bu ...
I want to try routing on routers. Router does not show me my static routing commands. I used this static routing command on Router0 ip route 192.168 ...
On the image below, IS-IS does not appear in "router ?" commands. However, configuration guides on YT videos and other sources would always proceed to ...
So, I got the task of transmitting all logs made by one particular Cisco switch to our dedicated Syslog Server. Via Cisco IOS I did the following: ...
We'd like to modify the configuration via SNMPset command but unfortunately now the SNMPv3 was wrongly configured to Read-only. So, we can't add the c ...
I'm setting Radius server to remote login by LDAP. The problem is default user role is network-operator. I want to know how to upgrade user role to ne ...
I was wondering if it is possible to generate the hashed secret shown in the CISCO documentation using a python script, without a CISCO device. https ...
pc0(192.168.0.3/24) connect to the interface0(192.168.0.2/24),and the its default gateway is 192.168.0.2; pc1 connect to the interface1(192.168.1.3/2 ...
Frameworks like Genie Parser or TextFSM parse the output of the configuration. That is what the device answers when you ask it about some part of the ...
I used anyconnect-macos-4.8.01090-predeploy-k9.dmg to install anyconnect, it only works once after I install it. (I will then connect to my company's ...
I am trying to select the output of a Function into a Table ( Informix Server 11.1, Database Cisco UCCX). The function is executing fine but when I se ...
The code: but the output from the cisco router: although directly in the router's console: ...
Lets say I have 2 switches and 2-2 devices connected to each switch. Each device sends data to other devices in a cylic manner for example Device1 se ...
The user data format for the IOS appliance uses the following: The commands are accepted, but the returned value is not split to multiline How d ...
I'm working to build a Python script. my target is first show the description of interface, then check if the interface has ( up up ) or (up down ) no ...
I am trying to solve an issue with accessing web-server over two routers. Looking on the diagram accessing is following: The configuration on cisco ...