I have a C++ application interfacing with a NI DAQ card, however the name of the device is hard coded and if changed in the NI Max app it would stop w ...
I'm a little bit confused with my code. I want to read the position of a counter input (edge counter). I can get the Device and the channel but I want ...
The following code for data acquisition gives the below error OSError: [WinError 126] The specified module could not be found. Do you know wh ...
I'm a newbie using LabView for my project. So I'm developing a program that gathers data from sensors that attach in the DAQmx board and also a spectr ...
I get a parse error on line 51 (starting with startw = input('Enter starting wavelength: ')) but I have no idea why. The error reads as such; Line: 51 ...
I recently bought a data acquisition board ("NI 6341"), which has a CD with the driver, but doesn't provide any library (.h) to communicate with it. I ...
Im trying to make a program in c++ that needs to get data from the board ni pce-6341, but i cant find any library or any information on how to do that ...
I am confused as to how I go about creating code in CVI to create a graph in CVI with voltage (y-axis) vs time (x-axis) that I can use to track voltag ...
I'm having trouble carrying out what I think should be a pretty straightforward task on a NIDAQ usb6002: I have a low frequency sine wave that I'm mea ...
I am calculating the capacitance of a circuit using LabVieW. I have tried to get the time after the voltage across it reaches 2.5V. I am giving a supp ...
I want to record large amount of data in continuous mode, using a PCI 6110 and DAQ-assistant VI. At this point, I'm thinking how to dynamically change ...
I use the NI-PCI 6225 card. I want to read the 1000 samples with the time of each sample. I used DAQmxConfigurLogging C API, but in the TDMS file t ...
I'm having some issues reading analog input from a DAQ card in LabWindows CVI; the input configuration seems to be set to "Differential" by default, a ...
I need to create a VB.NET GUI to manage a National Instruments (NI) USB-6343 instrument. Should I use the NI Measurement Studio or niDAQms API? My G ...
Need some help here, I have a DAQ Measurement Computing USB-1208LS and I need some idea on how to control the DAQ. I have installed UniversalLibrary ...
I'm using a USB-6356 DAQ board to control an IC via SPI. I'm using parts of the NI SPI Digital Waveform library to create the digital waveform, then ...
Does DAQmx solely work with NI hardware or can it work with other brands of equipment? If it cannot how would I start to make a block diagram for an o ...
I am taking voltage readings and converting them into pressure readings. This is my first real experience with C so my code is messy but so far has wo ...
I have a simple data acquisition system to read analog dc voltage from the NI USB 6009. I have also created a qt console application to use the NIDAQm ...
I am getting an error when running py.test command. Inside the tox file, I have setup the deps to install pytest-bdd, PyDAQmx, and all other relevant ...